Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2011
  • 2010

Author

  • Anssi Laukkanen
2 Citations (Scopus)

Additive manufacturing of spare part supported by digital design concept

Laitinen, T., Julkunen, P., Laukkanen, A., Puukko, P. & Turunen, E., 2015, Advances in Powder Metallurgy and Particulate Materials : Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

ALD membrane strength measurement with a stylus profilometer

Gao, F., Puurunen, R., Laukkanen, A., Kilpi, L., Ronkainen, H. & Kiihamäki, J., 2013.

Research output: Contribution to conferenceConference PosterScientific

A multiscale modelling approach for estimating the effect of defects in unidirectional carbon fiber reinforced polymer composites

Antin, K. N., Laukkanen, A., Andersson, T., Smyl, D. & Vilaça, P., 12 Jun 2019, In : Materials. 12, 12, 15 p., 2885.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

An investigation into the effect of substrate on the load-bearing capacity of thin hard coatings

Wang, C. T., Hakala, T. J., Laukkanen, A., Ronkainen, H., Holmberg, K., Gao, N., Wood, R. J. K. & Langdon, T. G., 2016, In : Journal of Materials Science. 51, 9, p. 4390-4398

Research output: Contribution to journalArticle

5 Citations (Scopus)

Building a high temperature corrosion and erosion model for thermal spray coatings

Metsäjoki, J., Oksa, M., Vaari, J., Penttilä, K. & Laukkanen, A., 2014, (Submitted) Conference Abstracts (Including manuscripts on CD-ROM). Düsseldorf, p. 836-840

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Characterization of DLC-Coated and Uncoated Surfaces by New Directional Blanket Curvature Covering (DBCC) Method

Wolski, M., Podsiadlo, P., Stachowiak, G. W., Holmberg, K., Laukkanen, A. & Ronkainen, H., 2018, In : Tribology Letters. 66, 4, 153.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Characterization of true stress-strain behavior using optical monitoring

Andersson, T., Elers, L., Laukkanen, A. & Nevasmaa, P., 2010, Baltica VIII: Life Management and Maintenance for Power Plants. Espoo: VTT Technical Research Centre of Finland, Vol. 2. p. 221-232 (VTT Symposium; No. 265).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

Cohesive zone modeling of initiation and propagation of multiple cracks in hard thin surface coatings

Laukkanen, A., Holmberg, K., Ronkainen, H. & Wallin, K., 2011, In : Journal of ASTM International. 8, 1, p. 1-21 21 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Comparison of laboratory rolling-sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes

Oksanen, V., Valtonen, K., Andersson, P., Vaajoki, A., Laukkanen, A., Holmberg, K. & Kuokkala, V. T., 1 Jan 2017, In : Wear. 340-341, p. 73-81

Research output: Contribution to journalArticle

16 Citations (Scopus)

Component scale process model for metal additive manufacturing

Andersson, T., Laukkanen, A., Pinomaa, T., Laakso, P., Puukko, P., Lindroos, T. & Laitinen, T., 2016, World PM2016 Proceedings. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Computational modelling based wear resistance analysis of thick composite coatings

Holmberg, K., Laukkanen, A., Ghabchi, A., Rombouts, M., Turunen, E., Waudby, R., Suhonen, T., Valtonen, K. & Sarlin, E., 2014, In : Tribology International. 72, p. 13-30

Research output: Contribution to journalArticle

28 Citations (Scopus)

Creep damage and long term life modelling of an X20 steam line component

Auerkari, P., Salonen, J., Holmström, S., Laukkanen, A., Rantala, J. & Nikkarila, R., 2013, In : Engineering Failure Analysis. 35, p. 508-515 7 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Creep damage and long term life of steam line components: Case X20

Holmström, S., Auerkari, P., Salonen, J., Laukkanen, A., Rantala, J., Nikkarila, R. & Junttanen, J., 2010, Baltica VIII: Life Management and Maintenance for Power Plants. Espoo: VTT Technical Research Centre of Finland, Vol. 2. p. 154-166 (VTT Symposium; No. 265).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

Creep damage in X20CrMoV11-1: ex-service experience and a case study

Auerkari, P., Holmström, S., Salonen, J., Laukkanen, A. & Andersson, T., 2010, Espoo: VTT Technical Research Centre of Finland. 40 p. (VTT Tutkimusraportti; No. VTT-R-07168-10).

Research output: Book/ReportReport

Creep life simulations of EB welded copper overpack

Holmström, S., Laukkanen, A. & Andersson, T., 2013, Posiva. 30 p. (Posiva Working Report; No. 2012-96).

Research output: Book/ReportReport

Open Access

Creep properties of Zircaloy-4 for nuclear fuel cladding FEA simulation

Holmström, S., Andersson, T., Tulkki, V. & Laukkanen, A., 2013, Baltica IX. International Conference on Life Management and Maintenance for Power Plants. Auerkari, P. & Veivo, J. (eds.). Espoo: VTT Technical Research Centre of Finland, p. 302- 17 (VTT Technology; No. 106).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access

Creep properties of Zircaloy-4 for nuclear fuel cladding FEA simulation

Holmström, S., Andersson, T., Tulkki, V. & Laukkanen, A., 2013, Baltica IX. International Conference on Life Management and Maintenance for Power Plants - Abstracts. Auerkari, P. & Veivo, J. (eds.). Espoo: VTT Technical Research Centre of Finland, p. 46 (VTT Technology; No. 107).

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedingsScientific

Open Access

Creep strain, damage and life prediction for welded 0.5CMV steel

Rantala, J., Auerkari, P., Holmström, S., Salonen, J. & Laukkanen, A., 2010, Baltica VIII: Life Management and Maintenance for Power Plants. Espoo: VTT Technical Research Centre of Finland, Vol. 2. p. 176-192 (VTT Symposium; No. 265).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

Crystal Growth in Polyethylene by Molecular Dynamics: The Crystal Edge and Lamellar Thickness

Verho, T., Paajanen, A., Vaari, J. & Laukkanen, A., 10 Jul 2018, In : Macromolecules. 51, 13, p. 4865-4873 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
10 Citations (Scopus)
11 Citations (Scopus)

Data-Driven Optimization Of Metal Additive Manufacturing Solutions

Laukkanen, A., Pinomaa, T., Andersson, T., Lindroos, M., Yashchuk, I. & Suhonen, T., Oct 2019, Euro PM2019 Proceedings. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Deformation and damage mechanisms in high entropy alloys by multiscale materials modeling

Laukkanen, A., Lindroos, M., Andersson, T. & Suhonen, T., Sep 2019.

Research output: Contribution to conferenceConference AbstractScientific

Digitaalinen materiaalikehitys luo säästöä ja tehokkuutta teollisuuden materiaaliratkaisuihin

Lindoors, M., Laukkanen, A., Andersson, T. & Holmberg, K., 2017, In : Hitsaustekniikka. 69, 1, p. 41-42

Research output: Contribution to journalArticle

Digital engineering and agile manufacturing as future enablers

Kortelainen, J., Laukkanen, A., Puukko, P. & Komi, E., 2017, Towards a new era in manufacturing: Final report of VTT's For Industry spearhead programme. VTT Technical Research Centre of Finland, p. 53-65 (VTT Technology, Vol. 288).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Digitalizing materials development

Hokka, M., Kuokkala, V-P., Laukkanen, A. & Holmberg, K., 2017, BSA - Breakthrough Steels and Applications: Final Report 3/2017. p. 130-142 (DIMECC Publications Series; No. 16).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

DIMECC Breakthrough materials doctoral school

Heino, M., Hokka, M., Kuokkala, V-T., Holmberg, K. & Laukkanen, A., 2017, BSA - Breakthrough Steels and Applications: Final Report 3/2017. p. 143-148 (DIMECC Publications Series; No. 16).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Effective interface model for design and tailoring of wc-co microstructures

Laukkanen, A., Andersson, T., Pinomaa, T. & Holmberg, K., 2015, Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition. European Power Metallurgy Association EPMA

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Effective interface model for design and tailoring of wc-co microstructures

Laukkanen, A., Pinomaa, T., Holmberg, K. & Andersson, T., 2016, In : Powder Metallurgy. 59, 1, p. 20-30

Research output: Contribution to journalArticle

6 Citations (Scopus)

Experimentally verified model based predictions for integrity of Cu overpack

Rantala, J., Pohja, R., Auerkari, P., Laukkanen, A. & Andersson, T., 2019, Baltica XI: International Conference on Life Management and Maintenance for Power Plants. VTT Technical Research Centre of Finland, 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Open Access
File
1 Downloads (Pure)

Experimental study on the behavior of wear resistant steels under high velocity single particle impacts

Lindroos, M., Apostol, M., Kuokkala, V-T., Laukkanen, A., Valtonen, K., Holmberg, K. & Oja, O., 2015, In : International Journal of Impact Engineering. 78, p. 114-127

Research output: Contribution to journalArticle

18 Citations (Scopus)

Finite element analysis of coating adhesion failure in pre-existing crack field

Holmberg, K., Laukkanen, A., Ronkainen, H. & Wallin, K., 2013, In : Tribology: Materials, Surfaces & Interfaces. 7, 1, p. 42-51 9 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Finite element modeling of Al6082 Plasma Electrolytic Oxidation coatings

Khakalo, S., Laukkanen, A., Suhonen, T., Holmberg, K., Bousser, E., Yerokhin, A., Withers, P. J. & Matthews, A., Oct 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 104-107 4 p. (University of Oulu: Mechanical Engineering. Report ; No. 9).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access

Focus on friction and wear

Lehtovaara, A., Laukkanen, A., Morales-Espejel, G. E., Kallio, M., Linjamaa, A. & Norrby, T., 1 Jan 2017, In : Tribologia. 35, 3, p. 16-19 4 p.

Research output: Contribution to journalArticle

Fracture Assessment of Reactor Circuit (FRAS): FRAS summary report

Karjalainen-Roikonen, P., Calonius, K., Timperi, A., Cronvall, O., Keinänen, H., Kuutti, J., Kaunisto, K., Laukkanen, A., Elers, L., Valo, M., Lappalainen, P., Planman, T. & Pekka, N., 2011, SAFIR2010: The Finnish Research Programme on Safety 2007-2010: Final Report. Espoo: VTT Technical Research Centre of Finland, p. 414-429 (VTT Tiedotteita - Research Notes; No. 2571).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Fracture Assessment of Reactor Circuit (FRAS): Advanced numerical fracture assessment methods

Laukkanen, A., Kuutti, J., Andersson, T. & Karjalainen-Roikonen, P., 2011, SAFIR2010: The Finnish Research Programme on Safety 2007-2010: Final Report. Espoo: VTT Technical Research Centre of Finland, p. 430-439 (VTT Tiedotteita - Research Notes; No. 2571).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Open Access

Fracture characteristics of new ultra-high-strength steel with yield strengths 900-960 MPa

Nevasmaa, P., Karjalainen-Roikonen, P., Laukkanen, A., Nykänen, T., Ameri, A., Björk, T., Limnell, T. & Kuoppala, J., 2010, Proceedings: 2nd International Conference Super-High Strength Steels (SHSS), Peschiera del Garda, 17-20 October 2010. Milano: Associazione Italiana di Metallurgia AIM, 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

High velocity particle impactor: Modeling and experimental verification of impact wear tests

Apostol, M., Kuokkala, V-T., Laukkanen, A., Holmberg, K., Waudby, R. & Lindroos, M., 2013, Proceedings: 5th World Tribology Congress, WTC 2013. Vol. 1-4. 399

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

3 Citations (Scopus)

Influence of weld strength mis-match on failure behaviour of strain hardened austenitic stainless steel

Nevasmaa, P., Laukkanen, A., Sirén, M., Somani, M. & Karjalainen, P., 2010, Proceedings: 2nd International Conference Super High Strength Steels (SHSS), Peschiera del Garda (Verona), Italy, 17 - 20.10.2010. Associazione Italiana di Metallurgia AIM, 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Influence of weld strength mis-match on failure behaviour of strain hardened austentic stainless steel

Nevasmaa, P., Laukkanen, A., Andersson, T. & Sirén, M., 2010. 12 p.

Research output: Contribution to conferenceConference articleProfessional

Influence of weld undermatching strength (mis-match) on limit load and failure behavior of strain hardened austenitic stainless steel

Nevasmaa, P., Laukkanen, A. & Sirén, M., 2011, Proceedings: 7th European Stainless Steel Conference - Science and Market, Como, Italy 21 - 23.9.2011. Associazione Italiana di Metallurgia AIM, 33

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Integrated computational materials engineering for emerging manufacturing technologies

Andersson, T., Laukkanen, A., Sippola, M., Majaniemi, S., Pinomaa, T. & Suhonen, T., 2017, Towards a new era in manufacturing: Final report of VTT's For Industry spearhead programme. VTT Technical Research Centre of Finland, p. 66-71 (VTT Technology, Vol. 288).

Research output: Chapter in Book/Report/Conference proceedingChapter or book articleProfessional

Lifing of high temperature plant: deterministic and probabilistic methods

Auerkari, P., Pohja, R., Yli-Olli, S., Rantala, J. & Laukkanen, A., 2014, VTT Technical Research Centre of Finland. 21 p. (VTT Research Report; No. VTT-R-00753-14).

Research output: Book/ReportReport

Low-temperature fracture characteristics of new 900-960 MPa yield ultra-high strength and 12% Cr ferritic stainless steel grades for structural use

Nevasmaa, P., Karjalainen-Roikonen, P. & Laukkanen, A., 2015. 31 p.

Research output: Contribution to conferenceConference articleScientific

Material integrity of welded copper overpack: Annual report 2013

Rantala, J., Salonen, J., Auerkari, P., Laukkanen, A., Andersson, T., Raunio, M., Holmström, S. & Saukkonen, T., 2014, Espoo: VTT Technical Research Centre of Finland. 21 p. (VTT Research Report; No. VTT-R-01173-14).

Research output: Book/ReportReport

Material integrity of welded copper overpack: Annual report 2014

Rantala, J., Auerkari, P., Laukkanen, A., Andersson, T. & Saukkonen, T., 2015, VTT Technical Research Centre of Finland. 17 p. (VTT Research Report, Vol. VTT-R-00773-15).

Research output: Book/ReportReport

Open Access

Mechanical performance and life prediction for canister copper

Rantala, J., Auerkari, P., Salonen, J., Holmström, S., Laukkanen, A. & Saukkonen, T., 2010, Baltica VIII: Life Management and Maintenance for Power Plants. Espoo: VTT Technical Research Centre of Finland, Vol. 1. p. 151-162 (VTT Symposium; No. 264).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Open Access