A reference merging unit and calibration setup for sampled values over Ethernet

Tapio Lehtonen; Jari Hällström

A reference merging unit and calibration setup for sampled values over Ethernet

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

8 Citations (Scopus)

Abstract

This paper describes a reference digitizer-or a merging unit in the context of prevalent standards-for producing a stream of traceable sampled values over Ethernet. The device is based on an earlier custom digitizer design. A measurement setup for calibrating other equipment is built around the digitizer and Ethernet hardware including a network timing source. The digitizer has built-in functionality for time synchronicity in the lab and in remote locations. A field measurement campaign is planned for on-site calibration of electrical grid equipment in a live network environment.

Original language	English
Title of host publication	Precision Electromagnetic Measurements (CPEM 2016), 2016 Conference on
Publisher	IEEE Institute of Electrical and Electronic Engineers
Pages	1-2
ISBN (Electronic)	978-1-4673-9134-4, 978-1-4673-9132-0
ISBN (Print)	978-1-4673-9135-1
Publication status	Published - 11 Aug 2016
MoE publication type	A4 Article in a conference publication
Event	Conference on Precision Electromagnetic Measurements, CPEM 2016 - Ottawa, Canada Duration: 10 Jul 2016 → 15 Jul 2016

Conference

Conference	Conference on Precision Electromagnetic Measurements, CPEM 2016
Abbreviated title	CPEM 2016
Country/Territory	Canada
City	Ottawa
Period	10/07/16 → 15/07/16

Keywords

Calibration
digitizer
IEC 61850
measurement techniques
power system measurements
substation automation

Access to Document

http://ieeexplore.ieee.org/document/7540460/

Cite this

@inproceedings{e773c103ea664fdda646d97bec7f8565,

title = "A reference merging unit and calibration setup for sampled values over Ethernet",

abstract = "This paper describes a reference digitizer-or a merging unit in the context of prevalent standards-for producing a stream of traceable sampled values over Ethernet. The device is based on an earlier custom digitizer design. A measurement setup for calibrating other equipment is built around the digitizer and Ethernet hardware including a network timing source. The digitizer has built-in functionality for time synchronicity in the lab and in remote locations. A field measurement campaign is planned for on-site calibration of electrical grid equipment in a live network environment.",

keywords = "Calibration, digitizer, IEC 61850, measurement techniques, power system measurements, substation automation",

author = "Tapio Lehtonen and Jari H{\"a}llstr{\"o}m",

year = "2016",

month = aug,

day = "11",

language = "English",

isbn = "978-1-4673-9135-1",

pages = "1--2",

booktitle = "Precision Electromagnetic Measurements (CPEM 2016), 2016 Conference on",

publisher = "IEEE Institute of Electrical and Electronic Engineers",

address = "United States",

note = "Conference on Precision Electromagnetic Measurements, CPEM 2016, CPEM 2016 ; Conference date: 10-07-2016 Through 15-07-2016",

}

Lehtonen, T & Hällström, J 2016, A reference merging unit and calibration setup for sampled values over Ethernet. in Precision Electromagnetic Measurements (CPEM 2016), 2016 Conference on. IEEE Institute of Electrical and Electronic Engineers, pp. 1-2, Conference on Precision Electromagnetic Measurements, CPEM 2016, Ottawa, Canada, 10/07/16. <http://ieeexplore.ieee.org/document/7540460/>

A reference merging unit and calibration setup for sampled values over Ethernet. / Lehtonen, Tapio ; Hällström, Jari.
Precision Electromagnetic Measurements (CPEM 2016), 2016 Conference on. IEEE Institute of Electrical and Electronic Engineers, 2016. p. 1-2.

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - A reference merging unit and calibration setup for sampled values over Ethernet

AU - Lehtonen, Tapio

AU - Hällström, Jari

PY - 2016/8/11

Y1 - 2016/8/11

N2 - This paper describes a reference digitizer-or a merging unit in the context of prevalent standards-for producing a stream of traceable sampled values over Ethernet. The device is based on an earlier custom digitizer design. A measurement setup for calibrating other equipment is built around the digitizer and Ethernet hardware including a network timing source. The digitizer has built-in functionality for time synchronicity in the lab and in remote locations. A field measurement campaign is planned for on-site calibration of electrical grid equipment in a live network environment.

AB - This paper describes a reference digitizer-or a merging unit in the context of prevalent standards-for producing a stream of traceable sampled values over Ethernet. The device is based on an earlier custom digitizer design. A measurement setup for calibrating other equipment is built around the digitizer and Ethernet hardware including a network timing source. The digitizer has built-in functionality for time synchronicity in the lab and in remote locations. A field measurement campaign is planned for on-site calibration of electrical grid equipment in a live network environment.

KW - Calibration

KW - digitizer

KW - IEC 61850

KW - measurement techniques

KW - power system measurements

KW - substation automation

M3 - Conference article in proceedings

SN - 978-1-4673-9135-1

SP - 1

EP - 2

BT - Precision Electromagnetic Measurements (CPEM 2016), 2016 Conference on

PB - IEEE Institute of Electrical and Electronic Engineers

T2 - Conference on Precision Electromagnetic Measurements, CPEM 2016

Y2 - 10 July 2016 through 15 July 2016

ER -

A reference merging unit and calibration setup for sampled values over Ethernet

Abstract

Conference

Keywords

Access to Document

Fingerprint

Cite this