A three-phase calibration and field measurement setup based on a custom digitizer

Tapio Lehtonen; Jari Hällström; Esa-Pekka Suomalainen

doi:10.1109/CPEM.2016.7540738

A three-phase calibration and field measurement setup based on a custom digitizer

Tapio Lehtonen, Jari Hällström, Esa-Pekka Suomalainen

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Abstract

This paper describes a new three-phase power measurement setup to be used as a national power standard in Finland. A custom 6-channel digitizer was previously developed for the purpose together with measurement software, which can be extended at will to accommodate new analyses. The setup can easily be moved outside the lab for field measurements. Voltage attenuators are custom-made at VTT and different types of current sensors can be selected for use depending on current levels and location. Uncertainty budget is currently being made for the setup.

Original language	English
Title of host publication	Precision Electromagnetic Measurements (CPEM 2016), 2016 Conference on
Publisher	IEEE Institute of Electrical and Electronic Engineers
Pages	1-2
ISBN (Electronic)	978-1-4673-9134-4, 978-1-4673-9132-0
ISBN (Print)	978-1-4673-9135-1
DOIs	https://doi.org/10.1109/CPEM.2016.7540738
Publication status	Published - 11 Aug 2016
MoE publication type	A4 Article in a conference publication
Event	Conference on Precision Electromagnetic Measurements, CPEM 2016 - Ottawa, Canada Duration: 10 Jul 2016 → 15 Jul 2016

Conference

Conference	Conference on Precision Electromagnetic Measurements, CPEM 2016
Abbreviated title	CPEM 2016
Country/Territory	Canada
City	Ottawa
Period	10/07/16 → 15/07/16

Keywords

Calibration
measurement techniques
measurement uncertainty
power measurement
three-phase power

Access to Document

10.1109/CPEM.2016.7540738

Cite this

@inproceedings{dfb0f25b99e94838b56790c5c7edeb68,

title = "A three-phase calibration and field measurement setup based on a custom digitizer",

abstract = "This paper describes a new three-phase power measurement setup to be used as a national power standard in Finland. A custom 6-channel digitizer was previously developed for the purpose together with measurement software, which can be extended at will to accommodate new analyses. The setup can easily be moved outside the lab for field measurements. Voltage attenuators are custom-made at VTT and different types of current sensors can be selected for use depending on current levels and location. Uncertainty budget is currently being made for the setup.",

keywords = "Calibration, measurement techniques, measurement uncertainty, power measurement, three-phase power",

author = "Tapio Lehtonen and Jari H{\"a}llstr{\"o}m and Esa-Pekka Suomalainen",

year = "2016",

month = aug,

day = "11",

doi = "10.1109/CPEM.2016.7540738",

language = "English",

isbn = "978-1-4673-9135-1",

pages = "1--2",

booktitle = "Precision Electromagnetic Measurements (CPEM 2016), 2016 Conference on",

publisher = "IEEE Institute of Electrical and Electronic Engineers",

address = "United States",

note = "Conference on Precision Electromagnetic Measurements, CPEM 2016, CPEM 2016 ; Conference date: 10-07-2016 Through 15-07-2016",

}

Lehtonen, T , Hällström, J & Suomalainen, E-P 2016, A three-phase calibration and field measurement setup based on a custom digitizer. in Precision Electromagnetic Measurements (CPEM 2016), 2016 Conference on . IEEE Institute of Electrical and Electronic Engineers, pp. 1-2, Conference on Precision Electromagnetic Measurements, CPEM 2016, Ottawa, Canada, 10/07/16. https://doi.org/10.1109/CPEM.2016.7540738

A three-phase calibration and field measurement setup based on a custom digitizer. / Lehtonen, Tapio ; Hällström, Jari ; Suomalainen, Esa-Pekka.
Precision Electromagnetic Measurements (CPEM 2016), 2016 Conference on . IEEE Institute of Electrical and Electronic Engineers, 2016. p. 1-2.

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - A three-phase calibration and field measurement setup based on a custom digitizer

AU - Lehtonen, Tapio

AU - Hällström, Jari

AU - Suomalainen, Esa-Pekka

PY - 2016/8/11

Y1 - 2016/8/11

N2 - This paper describes a new three-phase power measurement setup to be used as a national power standard in Finland. A custom 6-channel digitizer was previously developed for the purpose together with measurement software, which can be extended at will to accommodate new analyses. The setup can easily be moved outside the lab for field measurements. Voltage attenuators are custom-made at VTT and different types of current sensors can be selected for use depending on current levels and location. Uncertainty budget is currently being made for the setup.

AB - This paper describes a new three-phase power measurement setup to be used as a national power standard in Finland. A custom 6-channel digitizer was previously developed for the purpose together with measurement software, which can be extended at will to accommodate new analyses. The setup can easily be moved outside the lab for field measurements. Voltage attenuators are custom-made at VTT and different types of current sensors can be selected for use depending on current levels and location. Uncertainty budget is currently being made for the setup.

KW - Calibration

KW - measurement techniques

KW - measurement uncertainty

KW - power measurement

KW - three-phase power

U2 - 10.1109/CPEM.2016.7540738

DO - 10.1109/CPEM.2016.7540738

M3 - Conference article in proceedings

SN - 978-1-4673-9135-1

SP - 1

EP - 2

BT - Precision Electromagnetic Measurements (CPEM 2016), 2016 Conference on

PB - IEEE Institute of Electrical and Electronic Engineers

T2 - Conference on Precision Electromagnetic Measurements, CPEM 2016

Y2 - 10 July 2016 through 15 July 2016

ER -

A three-phase calibration and field measurement setup based on a custom digitizer

Abstract

Conference

Keywords

Access to Document

Fingerprint

Cite this