Adding power quality monitoring to a smart kWh meter

Pekka Koponen, R. Seesvuori, R. Böstman

    Research output: Contribution to journalArticleScientificpeer-review

    8 Citations (Scopus)

    Abstract

    This article describes a method that gives some power quality quantities, like total voltage distortion and voltage unbalance, from relatively sparsely sampled measurements. It is based on an adaptive state observer for the voltage phasors. Requirements for power quality monitoring in power distribution are listed and the results of the laboratory and field tests of new power quality monitoring kWh meters summarised together with field use experience. Finally, the needs and possibilities for future development are discussed.
    Original languageEnglish
    Pages (from-to)159-163
    Number of pages5
    JournalPower Engineering Journal
    Volume10
    Issue number4
    DOIs
    Publication statusPublished - 1996
    MoE publication typeA1 Journal article-refereed

    Fingerprint

    Smart meters
    Power quality
    Monitoring
    Electric potential

    Cite this

    Koponen, Pekka ; Seesvuori, R. ; Böstman, R. / Adding power quality monitoring to a smart kWh meter. In: Power Engineering Journal. 1996 ; Vol. 10, No. 4. pp. 159-163.
    @article{9e32405da3a846b3820847bf6758e9eb,
    title = "Adding power quality monitoring to a smart kWh meter",
    abstract = "This article describes a method that gives some power quality quantities, like total voltage distortion and voltage unbalance, from relatively sparsely sampled measurements. It is based on an adaptive state observer for the voltage phasors. Requirements for power quality monitoring in power distribution are listed and the results of the laboratory and field tests of new power quality monitoring kWh meters summarised together with field use experience. Finally, the needs and possibilities for future development are discussed.",
    author = "Pekka Koponen and R. Seesvuori and R. B{\"o}stman",
    year = "1996",
    doi = "10.1049/pe:19960406",
    language = "English",
    volume = "10",
    pages = "159--163",
    journal = "Power Engineer",
    issn = "1479-8344",
    number = "4",

    }

    Adding power quality monitoring to a smart kWh meter. / Koponen, Pekka; Seesvuori, R.; Böstman, R.

    In: Power Engineering Journal, Vol. 10, No. 4, 1996, p. 159-163.

    Research output: Contribution to journalArticleScientificpeer-review

    TY - JOUR

    T1 - Adding power quality monitoring to a smart kWh meter

    AU - Koponen, Pekka

    AU - Seesvuori, R.

    AU - Böstman, R.

    PY - 1996

    Y1 - 1996

    N2 - This article describes a method that gives some power quality quantities, like total voltage distortion and voltage unbalance, from relatively sparsely sampled measurements. It is based on an adaptive state observer for the voltage phasors. Requirements for power quality monitoring in power distribution are listed and the results of the laboratory and field tests of new power quality monitoring kWh meters summarised together with field use experience. Finally, the needs and possibilities for future development are discussed.

    AB - This article describes a method that gives some power quality quantities, like total voltage distortion and voltage unbalance, from relatively sparsely sampled measurements. It is based on an adaptive state observer for the voltage phasors. Requirements for power quality monitoring in power distribution are listed and the results of the laboratory and field tests of new power quality monitoring kWh meters summarised together with field use experience. Finally, the needs and possibilities for future development are discussed.

    U2 - 10.1049/pe:19960406

    DO - 10.1049/pe:19960406

    M3 - Article

    VL - 10

    SP - 159

    EP - 163

    JO - Power Engineer

    JF - Power Engineer

    SN - 1479-8344

    IS - 4

    ER -