Alternative method for processing tail chopped lightning impulse waveforms

Carlos R. Hall Barbosa; Jari Hällström; Lilian S. Ferreira; Marcio T. Silva; Luiz C. Azevedo

Alternative method for processing tail chopped lightning impulse waveforms

Carlos R. Hall Barbosa^*
, Jari Hällström
, Lilian S. Ferreira
, Marcio T. Silva
, Luiz C. Azevedo

^*Corresponding author for this work

SU1202 Electrical metrology

Pontifical Catholic University of Rio de Janeiro
Centro De Pesquisa De Energia Eletrica

Research output: Contribution to conference › Conference article › Scientific › peer-review

1 Citation (Scopus)

Abstract

The International Electrotechnical Commission issued in 2010 a revision of the standards IEC 60060, describing how to calculate amplitude and time parameters used to evaluate high voltage tail chopped lightning impulse waveforms. However, the need for a full reference lightning impulse, in addition to the tail chopped impulse, creates difficulties for the tests and processing of the waveforms. This paper proposes an alternative method that precludes the need for the reference impulse.

Original language	English
Publication status	Published - 1 Jan 2015
MoE publication type	Not Eligible
Event	21st IMEKO World Congress on Measurement in Research and Industry - Prague, Czech Republic Duration: 30 Aug 2015 → 4 Sept 2015

Conference

Conference	21st IMEKO World Congress on Measurement in Research and Industry
Country/Territory	Czech Republic
City	Prague
Period	30/08/15 → 4/09/15

Keywords

High voltage
Impulse testing
Measurement standards
Measurement techniques
Software.

Access to Document

https://www.imeko.org/publications/wc-2015/IMEKO-WC-2015-TC4-120.pdf

Cite this

@conference{5cc69a573a274b1582107a8ebbf6341e,

title = "Alternative method for processing tail chopped lightning impulse waveforms",

abstract = "The International Electrotechnical Commission issued in 2010 a revision of the standards IEC 60060, describing how to calculate amplitude and time parameters used to evaluate high voltage tail chopped lightning impulse waveforms. However, the need for a full reference lightning impulse, in addition to the tail chopped impulse, creates difficulties for the tests and processing of the waveforms. This paper proposes an alternative method that precludes the need for the reference impulse.",

keywords = "High voltage, Impulse testing, Measurement standards, Measurement techniques, Software.",

author = "\{Hall Barbosa\}, \{Carlos R.\} and Jari H{\"a}llstr{\"o}m and Ferreira, \{Lilian S.\} and Silva, \{Marcio T.\} and Azevedo, \{Luiz C.\}",

year = "2015",

month = jan,

day = "1",

language = "English",

note = "21st IMEKO World Congress on Measurement in Research and Industry ; Conference date: 30-08-2015 Through 04-09-2015",

}

TY - CONF

T1 - Alternative method for processing tail chopped lightning impulse waveforms

AU - Hall Barbosa, Carlos R.

AU - Hällström, Jari

AU - Ferreira, Lilian S.

AU - Silva, Marcio T.

AU - Azevedo, Luiz C.

PY - 2015/1/1

Y1 - 2015/1/1

N2 - The International Electrotechnical Commission issued in 2010 a revision of the standards IEC 60060, describing how to calculate amplitude and time parameters used to evaluate high voltage tail chopped lightning impulse waveforms. However, the need for a full reference lightning impulse, in addition to the tail chopped impulse, creates difficulties for the tests and processing of the waveforms. This paper proposes an alternative method that precludes the need for the reference impulse.

AB - The International Electrotechnical Commission issued in 2010 a revision of the standards IEC 60060, describing how to calculate amplitude and time parameters used to evaluate high voltage tail chopped lightning impulse waveforms. However, the need for a full reference lightning impulse, in addition to the tail chopped impulse, creates difficulties for the tests and processing of the waveforms. This paper proposes an alternative method that precludes the need for the reference impulse.

KW - High voltage

KW - Impulse testing

KW - Measurement standards

KW - Measurement techniques

KW - Software.

UR - https://www.scopus.com/pages/publications/84951172120

M3 - Conference article

AN - SCOPUS:84951172120

T2 - 21st IMEKO World Congress on Measurement in Research and Industry

Y2 - 30 August 2015 through 4 September 2015

ER -

Alternative method for processing tail chopped lightning impulse waveforms

Abstract

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this