Automated high-throughput microbond tester for interfacial shear strength studies

Mathias von Essen; Essi Linnea Sarlin; Olli Tanhuanpää; Markus Matti Samuel Kakkonen; Pekka Laurikainen; Maija Hoikkanen; Rami Haakana; Jyrki Erik Vuorinen; Pasi Kallio

Automated high-throughput microbond tester for interfacial shear strength studies

Mathias von Essen
, Essi Linnea Sarlin
, Olli Tanhuanpää
, Markus Matti Samuel Kakkonen
, Pekka Laurikainen
, Maija Hoikkanen
, Rami Haakana
, Jyrki Erik Vuorinen
, Pasi Kallio

Not published at VTT

Tampere University of Technology (TUT)

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Abstract

This study presents a new high-throughput instrument for characterizing the shear strength of fibre/matrix interface. The developed instrument is applied to mechanical characterization of glass fibre/epoxy interface. As an application example, the time-dependent degradation of the adhesion properties of glass fibre sizing is studied. For this purpose, 480 microbond tests on ECR-glass/epoxy samples were performed. The degradation of the interfacial shear strength of the studied glass fibre was shown to be notable over time.

Original language	English
Title of host publication	SAMPE Europe Conference 2017
Subtitle of host publication	14th - 16th November 2017, Leinfelden-Echterdingen, Germany
Publisher	SAMPE Europe
ISBN (Print)	978-90-821727-7-5
Publication status	Published - 2017
MoE publication type	A4 Article in a conference publication
Event	SAMPE Europe Conference 2017 - Stuttgart, Germany Duration: 13 Nov 2017 → 16 Nov 2017 https://www.sampe-europe.org/about/library/

Conference

Conference	SAMPE Europe Conference 2017
Country/Territory	Germany
City	Stuttgart
Period	13/11/17 → 16/11/17
Internet address	https://www.sampe-europe.org/about/library/

Cite this

@inproceedings{08a7dbb7468e45e388cb573a1dc82884,

title = "Automated high-throughput microbond tester for interfacial shear strength studies",

abstract = "This study presents a new high-throughput instrument for characterizing the shear strength of fibre/matrix interface. The developed instrument is applied to mechanical characterization of glass fibre/epoxy interface. As an application example, the time-dependent degradation of the adhesion properties of glass fibre sizing is studied. For this purpose, 480 microbond tests on ECR-glass/epoxy samples were performed. The degradation of the interfacial shear strength of the studied glass fibre was shown to be notable over time.",

author = "Essen, \{Mathias von\} and Sarlin, \{Essi Linnea\} and Olli Tanhuanp{\"a}{\"a} and Kakkonen, \{Markus Matti Samuel\} and Pekka Laurikainen and Maija Hoikkanen and Rami Haakana and Vuorinen, \{Jyrki Erik\} and Pasi Kallio",

year = "2017",

language = "English",

isbn = "978-90-821727-7-5",

booktitle = "SAMPE Europe Conference 2017",

publisher = "SAMPE Europe",

address = "Netherlands",

note = "SAMPE Europe Conference 2017 ; Conference date: 13-11-2017 Through 16-11-2017",

url = "https://www.sampe-europe.org/about/library/",

}

Essen, MV, Sarlin, EL, Tanhuanpää, O, Kakkonen, MMS, Laurikainen, P, Hoikkanen, M, Haakana, R, Vuorinen, JE & Kallio, P 2017, Automated high-throughput microbond tester for interfacial shear strength studies. in SAMPE Europe Conference 2017: 14th - 16th November 2017, Leinfelden-Echterdingen, Germany. SAMPE Europe, SAMPE Europe Conference 2017, Stuttgart, Germany, 13/11/17.

Automated high-throughput microbond tester for interfacial shear strength studies. / Essen, Mathias von; Sarlin, Essi Linnea; Tanhuanpää, Olli et al.
SAMPE Europe Conference 2017: 14th - 16th November 2017, Leinfelden-Echterdingen, Germany. SAMPE Europe, 2017.

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Automated high-throughput microbond tester for interfacial shear strength studies

AU - Essen, Mathias von

AU - Sarlin, Essi Linnea

AU - Tanhuanpää, Olli

AU - Kakkonen, Markus Matti Samuel

AU - Laurikainen, Pekka

AU - Hoikkanen, Maija

AU - Haakana, Rami

AU - Vuorinen, Jyrki Erik

AU - Kallio, Pasi

PY - 2017

Y1 - 2017

N2 - This study presents a new high-throughput instrument for characterizing the shear strength of fibre/matrix interface. The developed instrument is applied to mechanical characterization of glass fibre/epoxy interface. As an application example, the time-dependent degradation of the adhesion properties of glass fibre sizing is studied. For this purpose, 480 microbond tests on ECR-glass/epoxy samples were performed. The degradation of the interfacial shear strength of the studied glass fibre was shown to be notable over time.

AB - This study presents a new high-throughput instrument for characterizing the shear strength of fibre/matrix interface. The developed instrument is applied to mechanical characterization of glass fibre/epoxy interface. As an application example, the time-dependent degradation of the adhesion properties of glass fibre sizing is studied. For this purpose, 480 microbond tests on ECR-glass/epoxy samples were performed. The degradation of the interfacial shear strength of the studied glass fibre was shown to be notable over time.

UR - https://researchportal.tuni.fi/en/publications/3aca00f4-b3e9-4478-bb57-02d3b3d55e2f

M3 - Conference article in proceedings

SN - 978-90-821727-7-5

BT - SAMPE Europe Conference 2017

PB - SAMPE Europe

T2 - SAMPE Europe Conference 2017

Y2 - 13 November 2017 through 16 November 2017

ER -

Automated high-throughput microbond tester for interfacial shear strength studies

Abstract

Conference

Other files and links

Fingerprint

Cite this