Bubble frequency and its spatial distribution

Wahab Mojtahedi

Research output: Book/ReportReportProfessional

Abstract

The results of investigation of spatial frequency distributions of bubbles in a freelybubbling three dimensional gas fluidised bed are reported. Two different gas distributor plates, one made from sintered metal and the other a simple perforated plate, were used and results compared under identical fluidising conditions.Two modes of bubble detection (and collection) are described.One sampling system, which is designed to enable correct measurements of bubble rise velocities, excludes a high number of small bubbles encountered by the probe.A second system of bubble detection, described in this paper, enabled much more accurate estimate of bubble frequencies to be made.In the course of this investigation, more extensive information has been gained as to the spatial distributions of bubbles in gas fluidised beds.
Original languageEnglish
Place of PublicationEspoo
PublisherVTT Technical Research Centre of Finland
Number of pages31
ISBN (Print)951-38-2677-5
Publication statusPublished - 1986
MoE publication typeNot Eligible

Publication series

NamePublications / Technical Research Centre of Finland
PublisherVTT
No.32
ISSN (Print)0358-5069

Fingerprint

spatial distribution
bubbles
beds
gases
perforated plates
distributors
frequency distribution
sampling
probes
estimates
metals

Keywords

  • gases
  • fluidized beds
  • fluidized bed processors
  • bubbling
  • boiling detection
  • spatial distribution

Cite this

Mojtahedi, W. (1986). Bubble frequency and its spatial distribution. Espoo: VTT Technical Research Centre of Finland. Technical Research Centre of Finland. Publications , No. 32
Mojtahedi, Wahab. / Bubble frequency and its spatial distribution. Espoo : VTT Technical Research Centre of Finland, 1986. 31 p. (Technical Research Centre of Finland. Publications ; No. 32).
@book{97290fcdd84f466e96b0ff8b3a775df5,
title = "Bubble frequency and its spatial distribution",
abstract = "The results of investigation of spatial frequency distributions of bubbles in a freelybubbling three dimensional gas fluidised bed are reported. Two different gas distributor plates, one made from sintered metal and the other a simple perforated plate, were used and results compared under identical fluidising conditions.Two modes of bubble detection (and collection) are described.One sampling system, which is designed to enable correct measurements of bubble rise velocities, excludes a high number of small bubbles encountered by the probe.A second system of bubble detection, described in this paper, enabled much more accurate estimate of bubble frequencies to be made.In the course of this investigation, more extensive information has been gained as to the spatial distributions of bubbles in gas fluidised beds.",
keywords = "gases, fluidized beds, fluidized bed processors, bubbling, boiling detection, spatial distribution",
author = "Wahab Mojtahedi",
year = "1986",
language = "English",
isbn = "951-38-2677-5",
series = "Publications / Technical Research Centre of Finland",
publisher = "VTT Technical Research Centre of Finland",
number = "32",
address = "Finland",

}

Mojtahedi, W 1986, Bubble frequency and its spatial distribution. Technical Research Centre of Finland. Publications , no. 32, VTT Technical Research Centre of Finland, Espoo.

Bubble frequency and its spatial distribution. / Mojtahedi, Wahab.

Espoo : VTT Technical Research Centre of Finland, 1986. 31 p. (Technical Research Centre of Finland. Publications ; No. 32).

Research output: Book/ReportReportProfessional

TY - BOOK

T1 - Bubble frequency and its spatial distribution

AU - Mojtahedi, Wahab

PY - 1986

Y1 - 1986

N2 - The results of investigation of spatial frequency distributions of bubbles in a freelybubbling three dimensional gas fluidised bed are reported. Two different gas distributor plates, one made from sintered metal and the other a simple perforated plate, were used and results compared under identical fluidising conditions.Two modes of bubble detection (and collection) are described.One sampling system, which is designed to enable correct measurements of bubble rise velocities, excludes a high number of small bubbles encountered by the probe.A second system of bubble detection, described in this paper, enabled much more accurate estimate of bubble frequencies to be made.In the course of this investigation, more extensive information has been gained as to the spatial distributions of bubbles in gas fluidised beds.

AB - The results of investigation of spatial frequency distributions of bubbles in a freelybubbling three dimensional gas fluidised bed are reported. Two different gas distributor plates, one made from sintered metal and the other a simple perforated plate, were used and results compared under identical fluidising conditions.Two modes of bubble detection (and collection) are described.One sampling system, which is designed to enable correct measurements of bubble rise velocities, excludes a high number of small bubbles encountered by the probe.A second system of bubble detection, described in this paper, enabled much more accurate estimate of bubble frequencies to be made.In the course of this investigation, more extensive information has been gained as to the spatial distributions of bubbles in gas fluidised beds.

KW - gases

KW - fluidized beds

KW - fluidized bed processors

KW - bubbling

KW - boiling detection

KW - spatial distribution

M3 - Report

SN - 951-38-2677-5

T3 - Publications / Technical Research Centre of Finland

BT - Bubble frequency and its spatial distribution

PB - VTT Technical Research Centre of Finland

CY - Espoo

ER -

Mojtahedi W. Bubble frequency and its spatial distribution. Espoo: VTT Technical Research Centre of Finland, 1986. 31 p. (Technical Research Centre of Finland. Publications ; No. 32).