Characterization of true stress-strain behavior using optical monitoring

Tom Andersson; Lauri Elers; Anssi Laukkanen; Pekka Nevasmaa

Characterization of true stress-strain behavior using optical monitoring

Tom Andersson, Lauri Elers, Anssi Laukkanen, Pekka Nevasmaa

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

Abstract

The present paper discusses the development and validation of miniature specimen techniques for the characterization of inherent strength properties of local microstructural regions of the weldment. The technique is based in in-situ optical monitoring of the specimen deformation behavior, particularly the localization of deformation, during the entire tensile test event using optical monitoring system. Also post-processing techniques are developed and documented for the system output. Examples of weldment characterization using 1 x 2 x 8 mm3 size specimens and determination of the associated true-stress-strain-curves are given.

Original language	English
Title of host publication	Baltica VIII
Subtitle of host publication	Life Management and Maintenance for Power Plants
Place of Publication	Espoo
Publisher	VTT Technical Research Centre of Finland
Pages	221-232
Volume	2
ISBN (Electronic)	978-951-38-7594-7
ISBN (Print)	978-951-38-7593-2
Publication status	Published - 2010
MoE publication type	B3 Non-refereed article in conference proceedings
Event	BALTICA VIII - International Conference on Life Management and Maintenance for Power Plants - Helsinki-Stockholm, Finland Duration: 18 May 2010 → 20 May 2010

Publication series

Series	VTT Symposium
Number	265
ISSN	0357-9387

Conference

Conference	BALTICA VIII - International Conference on Life Management and Maintenance for Power Plants
Country/Territory	Finland
City	Helsinki-Stockholm
Period	18/05/10 → 20/05/10

Access to Document

https://publications.vtt.fi/pdf/symposiums/2011/S265.pdf

Cite this

@inproceedings{55ab892b19564fe7aae7413b87a2adec,

title = "Characterization of true stress-strain behavior using optical monitoring",

abstract = "The present paper discusses the development and validation of miniature specimen techniques for the characterization of inherent strength properties of local microstructural regions of the weldment. The technique is based in in-situ optical monitoring of the specimen deformation behavior, particularly the localization of deformation, during the entire tensile test event using optical monitoring system. Also post-processing techniques are developed and documented for the system output. Examples of weldment characterization using 1 x 2 x 8 mm3 size specimens and determination of the associated true-stress-strain-curves are given.",

author = "Tom Andersson and Lauri Elers and Anssi Laukkanen and Pekka Nevasmaa",

year = "2010",

language = "English",

isbn = "978-951-38-7593-2",

volume = "2",

series = "VTT Symposium",

publisher = "VTT Technical Research Centre of Finland",

number = "265",

pages = "221--232",

booktitle = "Baltica VIII",

address = "Finland",

note = "BALTICA VIII - International Conference on Life Management and Maintenance for Power Plants ; Conference date: 18-05-2010 Through 20-05-2010",

}

Andersson, T, Elers, L, Laukkanen, A & Nevasmaa, P 2010, Characterization of true stress-strain behavior using optical monitoring. in Baltica VIII: Life Management and Maintenance for Power Plants. vol. 2, VTT Technical Research Centre of Finland, Espoo, VTT Symposium, no. 265, pp. 221-232, BALTICA VIII - International Conference on Life Management and Maintenance for Power Plants, Helsinki-Stockholm, Finland, 18/05/10. <https://publications.vtt.fi/pdf/symposiums/2011/S265.pdf>

Characterization of true stress-strain behavior using optical monitoring. / Andersson, Tom; Elers, Lauri; Laukkanen, Anssi et al.
Baltica VIII: Life Management and Maintenance for Power Plants. Vol. 2 Espoo: VTT Technical Research Centre of Finland, 2010. p. 221-232 (VTT Symposium; No. 265).

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

TY - GEN

T1 - Characterization of true stress-strain behavior using optical monitoring

AU - Andersson, Tom

AU - Elers, Lauri

AU - Laukkanen, Anssi

AU - Nevasmaa, Pekka

PY - 2010

Y1 - 2010

N2 - The present paper discusses the development and validation of miniature specimen techniques for the characterization of inherent strength properties of local microstructural regions of the weldment. The technique is based in in-situ optical monitoring of the specimen deformation behavior, particularly the localization of deformation, during the entire tensile test event using optical monitoring system. Also post-processing techniques are developed and documented for the system output. Examples of weldment characterization using 1 x 2 x 8 mm3 size specimens and determination of the associated true-stress-strain-curves are given.

AB - The present paper discusses the development and validation of miniature specimen techniques for the characterization of inherent strength properties of local microstructural regions of the weldment. The technique is based in in-situ optical monitoring of the specimen deformation behavior, particularly the localization of deformation, during the entire tensile test event using optical monitoring system. Also post-processing techniques are developed and documented for the system output. Examples of weldment characterization using 1 x 2 x 8 mm3 size specimens and determination of the associated true-stress-strain-curves are given.

M3 - Conference article in proceedings

SN - 978-951-38-7593-2

VL - 2

T3 - VTT Symposium

SP - 221

EP - 232

BT - Baltica VIII

PB - VTT Technical Research Centre of Finland

CY - Espoo

T2 - BALTICA VIII - International Conference on Life Management and Maintenance for Power Plants

Y2 - 18 May 2010 through 20 May 2010

ER -

Characterization of true stress-strain behavior using optical monitoring

Abstract

Publication series

Conference

Access to Document

Fingerprint

Cite this