Skip to main navigation Skip to search Skip to main content

Comparison of the fertilizer properties of ash fractions from medium-sized (32 mw) and small-sized (6 mw) municipal district heating plants

  • Hannu Nurmesniemi*
  • , Mikko Mäkelä
  • , Risto Pöykiö
  • , Olli Dahl
  • *Corresponding author for this work
  • Stora Enso Oyj
  • Aalto University

Research output: Contribution to journalArticleScientificpeer-review

Abstract

Due to the low heavy metal concentrations, the bottom ash from a 32 MW municipal district heating plant was determined to be a potential forest fertilizer as such. However, additional Ca would be needed, because its Ca concentration of 1.9- % (d.w.) was lower than the statutory Finnish minimum limit value of 6.0-% (d.w.) for Ca in forest fertilizer. Due to the elevated As concentration (53.0 mg/kg; d.w.) in the fly ash from the 32 MW municipal district heating plant, and Cr concentration (620 mg/kg; d.w.) in the ash fraction (i.e. mixture of the bottom ash and fly ash) from the 6 MW municipal district heating plant, which exceed the limit values of 30 mg/kg (d.w.) and 300 mg/kg (d.w.) for As and Cr, respectively, these residues are not suitable as forest fertilizers. Although these ash fractions cannot be used as a forest fertilizer as such, they can be used for the landscaping of landfills or in industrial and other areas that are closed to the public. However, an environmental permit is then needed.

Original languageEnglish
Pages (from-to)1143-1147
Number of pages5
JournalWorld Academy of Science, Engineering and Technology
Volume5
Issue number3
Publication statusPublished - Mar 2011
MoE publication typeA1 Journal article-refereed

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Ash
  • Fertilizer
  • Forest residue
  • Peat
  • Waste

Fingerprint

Dive into the research topics of 'Comparison of the fertilizer properties of ash fractions from medium-sized (32 mw) and small-sized (6 mw) municipal district heating plants'. Together they form a unique fingerprint.

Cite this