Corrigendum to “Thermal desorption spectrometry of beryllium plasma facing tiles exposed in the JET tokamak” (Fusion Engineering and Design (2018) 133 (135–141),

A. Baron-Wiechec (Corresponding Author), K. Heinol, Jari Likonen, E. Alves, N. Catarino, J. P. Coad, V. Corregidor, I. Jepu, G. F. Matthews, A. Widdowson, JET Contributors

Research output: Contribution to journalOther journal contributionScientific

Abstract

A mistake regretfully appears in Section 3.2 of the paper in the Fig. 4a and b. The authors make a sincere apology for the mistake and would like to apologise for any inconvenience caused. During preparation of the plot for the publication a mistake had occurred in the y-axis unit. This has been attributed to a typo error in the y-axis value column used in the preparation of the plot. Therefore, the y-axis value is in wrong decade, it should appear in 1014instead of 1015. The values from the plot were not used in any calculations presented in the paper therefore the change does not affect any conclusions of the paper. Fig. 4(a) and (b) should be as follows: [Figure presented]

Original languageEnglish
Pages (from-to)48-48
Number of pages1
JournalFusion Engineering and Design
Volume137
Early online date31 Aug 2018
DOIs
Publication statusPublished - 2018
MoE publication typeB1 Article in a scientific magazine

Fingerprint

Beryllium
Thermal desorption
Tile
Spectrometry
Fusion reactions
Plasmas
corrigendum

Cite this

Baron-Wiechec, A. ; Heinol, K. ; Likonen, Jari ; Alves, E. ; Catarino, N. ; Coad, J. P. ; Corregidor, V. ; Jepu, I. ; Matthews, G. F. ; Widdowson, A. ; JET Contributors. / Corrigendum to “Thermal desorption spectrometry of beryllium plasma facing tiles exposed in the JET tokamak” (Fusion Engineering and Design (2018) 133 (135–141),. In: Fusion Engineering and Design. 2018 ; Vol. 137. pp. 48-48.
@article{8cf00eff98bc4f54b661a27f6fc54159,
title = "Corrigendum to “Thermal desorption spectrometry of beryllium plasma facing tiles exposed in the JET tokamak” (Fusion Engineering and Design (2018) 133 (135–141),",
abstract = "A mistake regretfully appears in Section 3.2 of the paper in the Fig. 4a and b. The authors make a sincere apology for the mistake and would like to apologise for any inconvenience caused. During preparation of the plot for the publication a mistake had occurred in the y-axis unit. This has been attributed to a typo error in the y-axis value column used in the preparation of the plot. Therefore, the y-axis value is in wrong decade, it should appear in 1014instead of 1015. The values from the plot were not used in any calculations presented in the paper therefore the change does not affect any conclusions of the paper. Fig. 4(a) and (b) should be as follows: [Figure presented]",
author = "A. Baron-Wiechec and K. Heinol and Jari Likonen and E. Alves and N. Catarino and Coad, {J. P.} and V. Corregidor and I. Jepu and Matthews, {G. F.} and A. Widdowson and {JET Contributors}",
year = "2018",
doi = "10.1016/j.fusengdes.2018.08.007",
language = "English",
volume = "137",
pages = "48--48",
journal = "Fusion Engineering and Design",
issn = "0920-3796",
publisher = "Elsevier",

}

Corrigendum to “Thermal desorption spectrometry of beryllium plasma facing tiles exposed in the JET tokamak” (Fusion Engineering and Design (2018) 133 (135–141), / Baron-Wiechec, A. (Corresponding Author); Heinol, K.; Likonen, Jari; Alves, E.; Catarino, N.; Coad, J. P.; Corregidor, V.; Jepu, I.; Matthews, G. F.; Widdowson, A.; JET Contributors.

In: Fusion Engineering and Design, Vol. 137, 2018, p. 48-48.

Research output: Contribution to journalOther journal contributionScientific

TY - JOUR

T1 - Corrigendum to “Thermal desorption spectrometry of beryllium plasma facing tiles exposed in the JET tokamak” (Fusion Engineering and Design (2018) 133 (135–141),

AU - Baron-Wiechec, A.

AU - Heinol, K.

AU - Likonen, Jari

AU - Alves, E.

AU - Catarino, N.

AU - Coad, J. P.

AU - Corregidor, V.

AU - Jepu, I.

AU - Matthews, G. F.

AU - Widdowson, A.

AU - JET Contributors

PY - 2018

Y1 - 2018

N2 - A mistake regretfully appears in Section 3.2 of the paper in the Fig. 4a and b. The authors make a sincere apology for the mistake and would like to apologise for any inconvenience caused. During preparation of the plot for the publication a mistake had occurred in the y-axis unit. This has been attributed to a typo error in the y-axis value column used in the preparation of the plot. Therefore, the y-axis value is in wrong decade, it should appear in 1014instead of 1015. The values from the plot were not used in any calculations presented in the paper therefore the change does not affect any conclusions of the paper. Fig. 4(a) and (b) should be as follows: [Figure presented]

AB - A mistake regretfully appears in Section 3.2 of the paper in the Fig. 4a and b. The authors make a sincere apology for the mistake and would like to apologise for any inconvenience caused. During preparation of the plot for the publication a mistake had occurred in the y-axis unit. This has been attributed to a typo error in the y-axis value column used in the preparation of the plot. Therefore, the y-axis value is in wrong decade, it should appear in 1014instead of 1015. The values from the plot were not used in any calculations presented in the paper therefore the change does not affect any conclusions of the paper. Fig. 4(a) and (b) should be as follows: [Figure presented]

UR - http://www.scopus.com/inward/record.url?scp=85052653028&partnerID=8YFLogxK

U2 - 10.1016/j.fusengdes.2018.08.007

DO - 10.1016/j.fusengdes.2018.08.007

M3 - Other journal contribution

AN - SCOPUS:85052653028

VL - 137

SP - 48

EP - 48

JO - Fusion Engineering and Design

JF - Fusion Engineering and Design

SN - 0920-3796

ER -