Demonstrating Pilot-Scale Gas Fermentation for Acetate Production from Biomass-Derived Syngas Streams

Gas fermentation is gaining attention as a crucial technology for converting gaseous feedstocks into value-added chemicals. Despite numerous efforts over the past decade to investigate these innovative processes at a lab scale, to date, the evaluation of the technologies in relevant industrial environments is scarce. This study examines the fermentative production of acetate from biomass-derived syngas using Moorella thermoacetica. A mobile gas fermentation pilot plant was coupled to a bubbling fluidized-bed gasifier with syngas purification to convert crushed bark-derived syngas. The syngas purification steps included hot filtration, catalytic reforming, and final syngas cleaning. Different latter configurations were evaluated to enable a simplified syngas cleaning configuration for microbial syngas conversion compared to conventional catalytic synthesis. Fermentation tests using ultra-cleaned syngas showed comparable microbial growth (1.3 g/L) and acetate production (22.3 g/L) to the benchmark fermentation of synthetic gases (1.2 g/L of biomass and 25.2 g/L of acetate). Additional fermentation trials on partially purified syngas streams identified H₂S and HCN as the primary inhibitory compounds. They also indicated that caustic scrubbing is an adequate and simplified final gas cleaning step to facilitate extended microbial fermentation. Overall, this study shows the potential of gas fermentation to valorize crude gaseous feedstocks, such as industrial off-gases, into platform chemicals.