Design of a modular wideband high voltage reference divider

Jari Hällström; Mohamed Agazar; S.E. Caria; S. Dedeoğlu; Alf-Peter Elg; Tomás Garcia; Jussi Havunen; Johann Meisner; Ahmet Merev; S. Özer; Stephan Passon; Paolo Roccato; Jorge Rovira

doi:10.5281/zenodo.8131452

Design of a modular wideband high voltage reference divider

Jari Hällström^*, Mohamed Agazar, S.E. Caria, S. Dedeoğlu, Alf-Peter Elg, Tomás Garcia, Jussi Havunen, Johann Meisner, Ahmet Merev, S. Özer, Stephan Passon, Paolo Roccato, Jorge Rovira

^*Corresponding author for this work

SU1202 Electrical metrology

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Abstract

This paper describes the design of a modular high voltage divider for calibration purposes. The frequency response of the modular divider is flat from DC up to c. 10 MHz. The 100 kV modules can be stacked to reach higher voltages. The divider is mainly targeted for on-site calibration of DC, AC and impulse voltage measuring systems in high voltage testing laboratories. It can also be used for precision measurement of combined and composite voltage test waveforms.

Original language	English
Title of host publication	CPEM 2022 Proceedings
Number of pages	2
DOIs	https://doi.org/10.5281/zenodo.8131452
Publication status	Published - 16 Dec 2022
MoE publication type	A4 Article in a conference publication
Event	Conference on Precision Electromagnetic Measurements, CPEM 2022 - Michael Fowler Centre, Wellington, New Zealand Duration: 12 Dec 2022 → 16 Dec 2022

Conference

Conference	Conference on Precision Electromagnetic Measurements, CPEM 2022
Country/Territory	New Zealand
City	Wellington
Period	12/12/22 → 16/12/22

Funding

Parts of the presented work are used in the project 19NRM07 (HV-com²) supported by the European Metrology Programme for Innovation and Research (EMPIR).

Access to Document

10.5281/zenodo.8131452

https://zenodo.org/record/8131452Licence: CC BY

HV-com2: Support for standardisation of high voltage testing with composite and combined wave shapes
Havunen, J. (Manager)
EURAMET e.V.
1/05/20 → 30/04/23
Project: EU project

Cite this

@inproceedings{9628e71ed31f4529ab45dccafc3ec2c9,

title = "Design of a modular wideband high voltage reference divider",

abstract = "This paper describes the design of a modular high voltage divider for calibration purposes. The frequency response of the modular divider is flat from DC up to c. 10 MHz. The 100 kV modules can be stacked to reach higher voltages. The divider is mainly targeted for on-site calibration of DC, AC and impulse voltage measuring systems in high voltage testing laboratories. It can also be used for precision measurement of combined and composite voltage test waveforms.",

author = "Jari H{\"a}llstr{\"o}m and Mohamed Agazar and S.E. Caria and S. Dedeoğlu and Alf-Peter Elg and Tom{\'a}s Garcia and Jussi Havunen and Johann Meisner and Ahmet Merev and S. {\"O}zer and Stephan Passon and Paolo Roccato and Jorge Rovira",

year = "2022",

month = dec,

day = "16",

doi = "10.5281/zenodo.8131452",

language = "English",

booktitle = "CPEM 2022 Proceedings",

note = "Conference on Precision Electromagnetic Measurements, CPEM 2022 ; Conference date: 12-12-2022 Through 16-12-2022",

}

Hällström, J, Agazar, M, Caria, SE, Dedeoğlu, S, Elg, A-P, Garcia, T, Havunen, J, Meisner, J, Merev, A, Özer, S, Passon, S, Roccato, P & Rovira, J 2022, Design of a modular wideband high voltage reference divider. in CPEM 2022 Proceedings. Conference on Precision Electromagnetic Measurements, CPEM 2022, Wellington, New Zealand, 12/12/22. https://doi.org/10.5281/zenodo.8131452

TY - GEN

T1 - Design of a modular wideband high voltage reference divider

AU - Hällström, Jari

AU - Agazar, Mohamed

AU - Caria, S.E.

AU - Dedeoğlu, S.

AU - Elg, Alf-Peter

AU - Garcia, Tomás

AU - Havunen, Jussi

AU - Meisner, Johann

AU - Merev, Ahmet

AU - Özer, S.

AU - Passon, Stephan

AU - Roccato, Paolo

AU - Rovira, Jorge

PY - 2022/12/16

Y1 - 2022/12/16

N2 - This paper describes the design of a modular high voltage divider for calibration purposes. The frequency response of the modular divider is flat from DC up to c. 10 MHz. The 100 kV modules can be stacked to reach higher voltages. The divider is mainly targeted for on-site calibration of DC, AC and impulse voltage measuring systems in high voltage testing laboratories. It can also be used for precision measurement of combined and composite voltage test waveforms.

AB - This paper describes the design of a modular high voltage divider for calibration purposes. The frequency response of the modular divider is flat from DC up to c. 10 MHz. The 100 kV modules can be stacked to reach higher voltages. The divider is mainly targeted for on-site calibration of DC, AC and impulse voltage measuring systems in high voltage testing laboratories. It can also be used for precision measurement of combined and composite voltage test waveforms.

U2 - 10.5281/zenodo.8131452

DO - 10.5281/zenodo.8131452

M3 - Conference article in proceedings

BT - CPEM 2022 Proceedings

T2 - Conference on Precision Electromagnetic Measurements, CPEM 2022

Y2 - 12 December 2022 through 16 December 2022

ER -

Design of a modular wideband high voltage reference divider

Abstract

Conference

Funding

Access to Document

Fingerprint

Projects

HV-com2: Support for standardisation of high voltage testing with composite and combined wave shapes

Cite this