Design to automation continuum for industrial processes: ISO 15926 - IEC 61131 versus an industrial case

Nikolaos Papakonstantinou; Juha Karttunen; Seppo Sierla; Valeriy Vyatkin

doi:10.1109/ETFA.2019.8869325

Design to automation continuum for industrial processes: ISO 15926 - IEC 61131 versus an industrial case

Nikolaos Papakonstantinou, Juha Karttunen, Seppo Sierla, Valeriy Vyatkin

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Abstract

Modern industrial processes have grown to be increasingly complex and their development is under tighter time and resource constraints. During the design lifecycle, the handover between process design and automation engineering is a critical step. This paper presents a standards-driven method for supporting the design to automation continuum. The source data format is ISO 15926 Proteus XML. Automation software describing control loops, alarms and interlocks are added as generic attributes in the Instrumentation Loop Function of the Proteus file. The target format is PLCopen XML for IEC 61131-3 based automation software. Control software code, global variables and the main program declarations and body, is auto-generated and defines the basic structure of the automation application. The standards-based method is compared with an applied approach based on state-of-the-art tools used by the industry.

Original language	English
Title of host publication	2019 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019
Publisher	IEEE Institute of Electrical and Electronic Engineers
Pages	1207-1212
Number of pages	6
ISBN (Electronic)	978-1-7281-0303-7
ISBN (Print)	978-1-7281-0304-4
DOIs	https://doi.org/10.1109/ETFA.2019.8869325
Publication status	Published - 17 Oct 2019
MoE publication type	A4 Article in a conference publication
Event	24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019 - Zaragoza, Spain Duration: 10 Sep 2019 → 13 Sep 2019

Publication series

Series	IEEE International Conference on Emerging Technologies and Factory Automation, ETFA
Volume	2019-September
ISSN	1946-0740

Conference

Conference	24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019
Country	Spain
City	Zaragoza
Period	10/09/19 → 13/09/19

Fingerprint

Keywords

automation engineering
DEXPI
IEC 61131
ISO 15926
PLCopen XML
process engineering
Proteus

Cite this

Papakonstantinou, N., Karttunen, J., Sierla, S., & Vyatkin, V. (2019). Design to automation continuum for industrial processes: ISO 15926 - IEC 61131 versus an industrial case. In 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019 (pp. 1207-1212). [8869325] IEEE Institute of Electrical and Electronic Engineers . IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vol.. 2019-September https://doi.org/10.1109/ETFA.2019.8869325

Papakonstantinou, Nikolaos ; Karttunen, Juha ; Sierla, Seppo ; Vyatkin, Valeriy. / Design to automation continuum for industrial processes : ISO 15926 - IEC 61131 versus an industrial case. 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019. IEEE Institute of Electrical and Electronic Engineers , 2019. pp. 1207-1212 (IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vol. 2019-September).

@inproceedings{0143d9b5c73b456da7f7330954dc9d8d,

title = "Design to automation continuum for industrial processes: ISO 15926 - IEC 61131 versus an industrial case",

abstract = "Modern industrial processes have grown to be increasingly complex and their development is under tighter time and resource constraints. During the design lifecycle, the handover between process design and automation engineering is a critical step. This paper presents a standards-driven method for supporting the design to automation continuum. The source data format is ISO 15926 Proteus XML. Automation software describing control loops, alarms and interlocks are added as generic attributes in the Instrumentation Loop Function of the Proteus file. The target format is PLCopen XML for IEC 61131-3 based automation software. Control software code, global variables and the main program declarations and body, is auto-generated and defines the basic structure of the automation application. The standards-based method is compared with an applied approach based on state-of-the-art tools used by the industry.",

keywords = "automation engineering, DEXPI, IEC 61131, ISO 15926, PLCopen XML, process engineering, Proteus",

author = "Nikolaos Papakonstantinou and Juha Karttunen and Seppo Sierla and Valeriy Vyatkin",

year = "2019",

month = oct,

day = "17",

doi = "10.1109/ETFA.2019.8869325",

language = "English",

isbn = "978-1-7281-0304-4",

series = "IEEE International Conference on Emerging Technologies and Factory Automation, ETFA",

publisher = "IEEE Institute of Electrical and Electronic Engineers ",

pages = "1207--1212",

booktitle = "2019 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019",

address = "United States",

note = "24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019 ; Conference date: 10-09-2019 Through 13-09-2019",

}

Papakonstantinou, N, Karttunen, J, Sierla, S & Vyatkin, V 2019, Design to automation continuum for industrial processes: ISO 15926 - IEC 61131 versus an industrial case. in 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019., 8869325, IEEE Institute of Electrical and Electronic Engineers , IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, vol. 2019-September, pp. 1207-1212, 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019, Zaragoza, Spain, 10/09/19. https://doi.org/10.1109/ETFA.2019.8869325

Design to automation continuum for industrial processes : ISO 15926 - IEC 61131 versus an industrial case. / Papakonstantinou, Nikolaos; Karttunen, Juha; Sierla, Seppo; Vyatkin, Valeriy.

2019 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019. IEEE Institute of Electrical and Electronic Engineers , 2019. p. 1207-1212 8869325 (IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vol. 2019-September).

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Design to automation continuum for industrial processes

T2 - 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019

AU - Papakonstantinou, Nikolaos

AU - Karttunen, Juha

AU - Sierla, Seppo

AU - Vyatkin, Valeriy

PY - 2019/10/17

Y1 - 2019/10/17

N2 - Modern industrial processes have grown to be increasingly complex and their development is under tighter time and resource constraints. During the design lifecycle, the handover between process design and automation engineering is a critical step. This paper presents a standards-driven method for supporting the design to automation continuum. The source data format is ISO 15926 Proteus XML. Automation software describing control loops, alarms and interlocks are added as generic attributes in the Instrumentation Loop Function of the Proteus file. The target format is PLCopen XML for IEC 61131-3 based automation software. Control software code, global variables and the main program declarations and body, is auto-generated and defines the basic structure of the automation application. The standards-based method is compared with an applied approach based on state-of-the-art tools used by the industry.

AB - Modern industrial processes have grown to be increasingly complex and their development is under tighter time and resource constraints. During the design lifecycle, the handover between process design and automation engineering is a critical step. This paper presents a standards-driven method for supporting the design to automation continuum. The source data format is ISO 15926 Proteus XML. Automation software describing control loops, alarms and interlocks are added as generic attributes in the Instrumentation Loop Function of the Proteus file. The target format is PLCopen XML for IEC 61131-3 based automation software. Control software code, global variables and the main program declarations and body, is auto-generated and defines the basic structure of the automation application. The standards-based method is compared with an applied approach based on state-of-the-art tools used by the industry.

KW - automation engineering

KW - DEXPI

KW - IEC 61131

KW - ISO 15926

KW - PLCopen XML

KW - process engineering

KW - Proteus

UR - http://www.scopus.com/inward/record.url?scp=85074202018&partnerID=8YFLogxK

U2 - 10.1109/ETFA.2019.8869325

DO - 10.1109/ETFA.2019.8869325

M3 - Conference article in proceedings

AN - SCOPUS:85074202018

SN - 978-1-7281-0304-4

T3 - IEEE International Conference on Emerging Technologies and Factory Automation, ETFA

SP - 1207

EP - 1212

BT - 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019

PB - IEEE Institute of Electrical and Electronic Engineers

Y2 - 10 September 2019 through 13 September 2019

ER -

Papakonstantinou N, Karttunen J, Sierla S, Vyatkin V. Design to automation continuum for industrial processes: ISO 15926 - IEC 61131 versus an industrial case. In 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2019. IEEE Institute of Electrical and Electronic Engineers . 2019. p. 1207-1212. 8869325. (IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vol. 2019-September). https://doi.org/10.1109/ETFA.2019.8869325

Access to Document

10.1109/ETFA.2019.8869325

Link to publication in Scopus