Device life cycle management requirements for identity and access management in the factory of future environment

Jari Partanen; Markku Kylänpää; Sanna Loukusa; Markku Korkiakoski; Jarno Salonen

doi:10.1016/j.procs.2022.08.028

Device life cycle management requirements for identity and access management in the factory of future environment

Jari Partanen, Markku Kylänpää (Corresponding Author), Sanna Loukusa, Markku Korkiakoski, Jarno Salonen

BA6403 Applied cybersecurity

Research output: Contribution to journal › Article in a proceedings journal › Scientific › peer-review

Abstract

Future factories will contain a huge number of interconnected systems and various Internet of Things (IoT) devices. Due to the increased complexity, the identity and access management of these systems during their entire device life cycle is a challenging task. At the same time, there is a shift from legacy automation protocols to the use of Internet protocols. This development is
increasing connectivity that will also expose more subsystems to new kinds of attacks. This article presents the typical device life cycle requirements for identity and access management in future industrial automation context also known as the factory of the future (FoF). We have considered two architecture candidates, namely the cloud and web-based architectures. The requirements
for a device life cycle management system called PROSE are given as an example use case. The article describes our research by presenting a practical example of the requirements that have been used to build a device life cycle management system.

Original language	English
Pages (from-to)	235-244
Number of pages	10
Journal	Procedia Computer Science
Volume	204
DOIs	https://doi.org/10.1016/j.procs.2022.08.028
Publication status	Published - 2022
MoE publication type	A4 Article in a conference publication
Event	International Conference on Industry Sciences and Computer Science Innovation, iSCSi’22 - Polytechnic Institute of Management and Technology (ISLA) / Online, Vila Nova de Gaia, Portugal Duration: 9 Mar 2022 → 11 Mar 2022 https://iscsi-conference.org/

Keywords

Access Control
IAM
Industrial IoT
IT-OT Convergence
Access control
IT-OT convergence

Access to Document

10.1016/j.procs.2022.08.028Licence: CC BY

Cite this

@article{c41b449f94f34073aec6b1ba466d78cf,

title = "Device life cycle management requirements for identity and access management in the factory of future environment",

abstract = "Future factories will contain a huge number of interconnected systems and various Internet of Things (IoT) devices. Due to the increased complexity, the identity and access management of these systems during their entire device life cycle is a challenging task. At the same time, there is a shift from legacy automation protocols to the use of Internet protocols. This development isincreasing connectivity that will also expose more subsystems to new kinds of attacks. This article presents the typical device life cycle requirements for identity and access management in future industrial automation context also known as the factory of the future (FoF). We have considered two architecture candidates, namely the cloud and web-based architectures. The requirementsfor a device life cycle management system called PROSE are given as an example use case. The article describes our research by presenting a practical example of the requirements that have been used to build a device life cycle management system.",

keywords = "Access Control, IAM, Industrial IoT, IT-OT Convergence, Access control, IT-OT convergence",

author = "Jari Partanen and Markku Kyl{\"a}np{\"a}{\"a} and Sanna Loukusa and Markku Korkiakoski and Jarno Salonen",

note = "Short and Full papers will be published in Elsevier{\textquoteright}s Procedia Computer Science open access journal. Industry Papers and Poster Papers will be published in a specific OpenAccess Industry Proceedings volume with ISBN. Publisher Copyright: {\textcopyright} 2022 Elsevier B.V.. All rights reserved.; International Conference on Industry Sciences and Computer Science Innovation, iSCSi{\textquoteright}22 ; Conference date: 09-03-2022 Through 11-03-2022",

year = "2022",

doi = "10.1016/j.procs.2022.08.028",

language = "English",

volume = "204",

pages = "235--244",

journal = "Procedia Computer Science",

issn = "1877-0509",

publisher = "Elsevier",

url = "https://iscsi-conference.org/",

}

TY - JOUR

T1 - Device life cycle management requirements for identity and access management in the factory of future environment

AU - Partanen, Jari

AU - Kylänpää, Markku

AU - Loukusa, Sanna

AU - Korkiakoski, Markku

AU - Salonen, Jarno

N1 - Short and Full papers will be published in Elsevier’s Procedia Computer Science open access journal. Industry Papers and Poster Papers will be published in a specific OpenAccess Industry Proceedings volume with ISBN. Publisher Copyright: © 2022 Elsevier B.V.. All rights reserved.

PY - 2022

Y1 - 2022

N2 - Future factories will contain a huge number of interconnected systems and various Internet of Things (IoT) devices. Due to the increased complexity, the identity and access management of these systems during their entire device life cycle is a challenging task. At the same time, there is a shift from legacy automation protocols to the use of Internet protocols. This development isincreasing connectivity that will also expose more subsystems to new kinds of attacks. This article presents the typical device life cycle requirements for identity and access management in future industrial automation context also known as the factory of the future (FoF). We have considered two architecture candidates, namely the cloud and web-based architectures. The requirementsfor a device life cycle management system called PROSE are given as an example use case. The article describes our research by presenting a practical example of the requirements that have been used to build a device life cycle management system.

AB - Future factories will contain a huge number of interconnected systems and various Internet of Things (IoT) devices. Due to the increased complexity, the identity and access management of these systems during their entire device life cycle is a challenging task. At the same time, there is a shift from legacy automation protocols to the use of Internet protocols. This development isincreasing connectivity that will also expose more subsystems to new kinds of attacks. This article presents the typical device life cycle requirements for identity and access management in future industrial automation context also known as the factory of the future (FoF). We have considered two architecture candidates, namely the cloud and web-based architectures. The requirementsfor a device life cycle management system called PROSE are given as an example use case. The article describes our research by presenting a practical example of the requirements that have been used to build a device life cycle management system.

KW - Access Control

KW - IAM

KW - Industrial IoT

KW - IT-OT Convergence

KW - Access control

KW - IT-OT convergence

UR - http://www.scopus.com/inward/record.url?scp=85142902365&partnerID=8YFLogxK

U2 - 10.1016/j.procs.2022.08.028

DO - 10.1016/j.procs.2022.08.028

M3 - Article in a proceedings journal

VL - 204

SP - 235

EP - 244

JO - Procedia Computer Science

JF - Procedia Computer Science

SN - 1877-0509

T2 - International Conference on Industry Sciences and Computer Science Innovation, iSCSi’22

Y2 - 9 March 2022 through 11 March 2022

ER -

Device life cycle management requirements for identity and access management in the factory of future environment

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

CyberFactory#1 – Tulevaisuuden tehtaiden mahdollisuudet ja uhat: Tutkimushankkeen loppuraportti

Cite this