EURAMET supplementary comparison EURAMET.L-S26.1, measurement of groove depth standards in the range 5 μm up to 0.9 mm

A. Lassila; V. Byman; J. Kirchhoff; M. Aksulu; M. Ozaita; L. Carcedo

doi:10.1088/0026-1394/60/1A/04003

EURAMET supplementary comparison EURAMET.L-S26.1, measurement of groove depth standards in the range 5 μm up to 0.9 mm

A. Lassila, V. Byman, J. Kirchhoff, M. Aksulu, M. Ozaita, L. Carcedo

BA6601 Length metrology

Research output: Contribution to journal › Article › Scientific › peer-review

Abstract

Main text In this supplementary comparison depths of six v-shaped grooves with nominal values 5/20/50/200/600 and 900 ?m were measured. The depths were measured according to ISO 5436-1. The PTB nickel depth setting standard was used as reference standard. PTB and MIKES measures all depths, CEM 2 and UME 3 larger depths. The results with associated uncertainties were in agreement. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCL, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Original language	English
Article number	04003
Journal	Metrologia
Volume	60
Issue number	1 A
DOIs	https://doi.org/10.1088/0026-1394/60/1A/04003
Publication status	Published - 1 Jan 2023
MoE publication type	A1 Journal article-refereed

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1088/0026-1394/60/1A/04003

Cite this

@article{d074edc18d8444babe6f5829f63b89b9,

title = "EURAMET supplementary comparison EURAMET.L-S26.1, measurement of groove depth standards in the range 5 μm up to 0.9 mm",

abstract = "Main text In this supplementary comparison depths of six v-shaped grooves with nominal values 5/20/50/200/600 and 900 ?m were measured. The depths were measured according to ISO 5436-1. The PTB nickel depth setting standard was used as reference standard. PTB and MIKES measures all depths, CEM 2 and UME 3 larger depths. The results with associated uncertainties were in agreement. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCL, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).",

author = "A. Lassila and V. Byman and J. Kirchhoff and M. Aksulu and M. Ozaita and L. Carcedo",

note = "Publisher Copyright: {\textcopyright} 2023 BIPM & IOP Publishing Ltd.",

year = "2023",

month = jan,

day = "1",

doi = "10.1088/0026-1394/60/1A/04003",

language = "English",

volume = "60",

journal = "Metrologia",

issn = "0026-1394",

publisher = "Institute of Physics IOP",

number = "1 A",

}

TY - JOUR

T1 - EURAMET supplementary comparison EURAMET.L-S26.1, measurement of groove depth standards in the range 5 μm up to 0.9 mm

AU - Lassila, A.

AU - Byman, V.

AU - Kirchhoff, J.

AU - Aksulu, M.

AU - Ozaita, M.

AU - Carcedo, L.

PY - 2023/1/1

Y1 - 2023/1/1

N2 - Main text In this supplementary comparison depths of six v-shaped grooves with nominal values 5/20/50/200/600 and 900 ?m were measured. The depths were measured according to ISO 5436-1. The PTB nickel depth setting standard was used as reference standard. PTB and MIKES measures all depths, CEM 2 and UME 3 larger depths. The results with associated uncertainties were in agreement. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCL, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

AB - Main text In this supplementary comparison depths of six v-shaped grooves with nominal values 5/20/50/200/600 and 900 ?m were measured. The depths were measured according to ISO 5436-1. The PTB nickel depth setting standard was used as reference standard. PTB and MIKES measures all depths, CEM 2 and UME 3 larger depths. The results with associated uncertainties were in agreement. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCL, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

UR - http://www.scopus.com/inward/record.url?scp=85152616164&partnerID=8YFLogxK

U2 - 10.1088/0026-1394/60/1A/04003

DO - 10.1088/0026-1394/60/1A/04003

M3 - Article

AN - SCOPUS:85152616164

SN - 0026-1394

VL - 60

JO - Metrologia

JF - Metrologia

IS - 1 A

M1 - 04003

ER -

EURAMET supplementary comparison EURAMET.L-S26.1, measurement of groove depth standards in the range 5 μm up to 0.9 mm

Abstract

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this