EURAMET.L-K4.2015 Key Comparison: Calibration of Diameter Standards EURAMET project 1410, Final report

Gian Bartolo Picotto
, Michael Matus
, Gábor Szikszai
, Emilio Prieto
, Václav Duchoň
, Jens Bo Toftegaard
, Cristos Bandis
, Gorana Baršić
, Robert Szumski
, Dragos Teodorescu
, Bruno Gastaldi
, José Antonio Salgado
, Gordana Bajić
, Felix Meli
, Rory Hanrahan
, Otto Jusko
, Marianne Äremann
, Faisal A. AlQahtany
, Murat Aksulu
, Richard Koops

National Metrological Institute (INRIM)
Budapest Fovaros Kormanyhivatala (BFKH)
Centro Español de Metrología (CEM)
Czech Metrology Institute (CMI)
Danish Technological Institute (DTI)
Hellenic Institute of Metrology (EIM)
National Institute of Metrology (INM)
National Institute of Industrial Technology (INTI)
Montenegrin Bureau of Metrology (MBM)
Federal Institute of Metrology (METAS)
German National Metrology Institute (PTB)
RISE Research Institutes of Sweden
National Measurements Calibration Center (SASO NMCC)
Dutch Metrology Institute (VSL)
Bundesamt für Eich- und Vermessungswesen (BEV)
Central Office of Measures (GUM)
Laboratoire National de Métrologie et d’Essais (LNE)
NSAI National Metrology Laboratory (NML)
Scientific and Technological Research Council of Turkey (TÜBITAK)

Research output: Book/Report › Report

1 Article

1 results

Filter

2021

Calibration of diameter standards (EURAMET.L-K4.2015)
Picotto, G. B., Matus, M., Gábor, S., Prieto, E., Duchoň, V., Toftegaard, J. B., Bandis, C., Baršić, G., Robert, S., Teodorescu, D., Gastaldi, B., Salgado, J., Bajic, G., Meli, F., Hanrahan, R., Jusko, O., Äremann, M., AlQahtany, F. A., Aksulu, M. & Koops, R. & 1 others, Lassila, A., 3 Nov 2021, In: Metrologia. 58, 1 A, 04004.
Research output: Contribution to journal › Article › Scientific › peer-review