Experiences from the Pilot operation and commissioning phase of a SCM process improvement program

Minna Nättinen; Tua Rahikkala; Antti Välimäki

doi:10.1109/EURMIC.1999.794780

Experiences from the Pilot operation and commissioning phase of a SCM process improvement program

Minna Nättinen, Tua Rahikkala, Antti Välimäki

VTT Technical Research Centre of Finland

Valmet Oyj

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

1 Citation (Scopus)

Abstract

Piloting of new practices and taking them into succesful large-scale use within an organisation are chal-lenging tasks in software process improvement programs.This paper describes an approach to piloting Software Congiguration Management (SCM) practices within an industrial organisation.In this case, the SCM improvement program based on Pr²imer, Practical Process Improvement for Embedded Real-time Software, developed by VTT Electronics.The aim of this paper is to describe the experiences from the pilot operation and commissioning phase of Pr²imer, including collection of SCM metrics, planning and arranging of feedback sessions, as well as analysing of the improvement.

Original language	English
Title of host publication	Proceedings of the 25th EUROMICRO Conference. EUROMICRO 99
Subtitle of host publication	Theory and Practice for the New Millennium
Publisher	IEEE Institute of Electrical and Electronic Engineers
Pages	185-191
Volume	2
ISBN (Print)	978-0-7695-0321-9
DOIs	https://doi.org/10.1109/EURMIC.1999.794780
Publication status	Published - 1999
MoE publication type	A4 Article in a conference publication
Event	25th EUROMICRO Conference - Milan, Italy Duration: 8 Sept 1999 → 10 Sept 1999

Publication series

Series	EUROMICRO Conference
Volume	25
ISSN	1089-6503

Conference

Conference	25th EUROMICRO Conference
Country/Territory	Italy
City	Milan
Period	8/09/99 → 10/09/99

Keywords

SCM

Access to Document

10.1109/EURMIC.1999.794780

Cite this

Nättinen, M., Rahikkala, T., & Välimäki, A. (1999). Experiences from the Pilot operation and commissioning phase of a SCM process improvement program. In Proceedings of the 25th EUROMICRO Conference. EUROMICRO 99: Theory and Practice for the New Millennium (Vol. 2, pp. 185-191). IEEE Institute of Electrical and Electronic Engineers. https://doi.org/10.1109/EURMIC.1999.794780

Nättinen, Minna ; Rahikkala, Tua ; Välimäki, Antti. / Experiences from the Pilot operation and commissioning phase of a SCM process improvement program. Proceedings of the 25th EUROMICRO Conference. EUROMICRO 99: Theory and Practice for the New Millennium. Vol. 2 IEEE Institute of Electrical and Electronic Engineers, 1999. pp. 185-191 (EUROMICRO Conference, Vol. 25).

@inproceedings{adb87b6e20c74de697ad2c619f0e7f12,

title = "Experiences from the Pilot operation and commissioning phase of a SCM process improvement program",

abstract = "Piloting of new practices and taking them into succesful large-scale use within an organisation are chal-lenging tasks in software process improvement programs.This paper describes an approach to piloting Software Congiguration Management (SCM) practices within an industrial organisation.In this case, the SCM improvement program based on Pr2imer, Practical Process Improvement for Embedded Real-time Software, developed by VTT Electronics.The aim of this paper is to describe the experiences from the pilot operation and commissioning phase of Pr2imer, including collection of SCM metrics, planning and arranging of feedback sessions, as well as analysing of the improvement.",

keywords = "SCM",

author = "Minna N{\"a}ttinen and Tua Rahikkala and Antti V{\"a}lim{\"a}ki",

note = "Project code: E7SU00254; 25th EUROMICRO Conference ; Conference date: 08-09-1999 Through 10-09-1999",

year = "1999",

doi = "10.1109/EURMIC.1999.794780",

language = "English",

isbn = "978-0-7695-0321-9",

volume = "2",

series = "EUROMICRO Conference",

publisher = "IEEE Institute of Electrical and Electronic Engineers",

pages = "185--191",

booktitle = "Proceedings of the 25th EUROMICRO Conference. EUROMICRO 99",

address = "United States",

}

Nättinen, M, Rahikkala, T & Välimäki, A 1999, Experiences from the Pilot operation and commissioning phase of a SCM process improvement program. in Proceedings of the 25th EUROMICRO Conference. EUROMICRO 99: Theory and Practice for the New Millennium. vol. 2, IEEE Institute of Electrical and Electronic Engineers, EUROMICRO Conference, vol. 25, pp. 185-191, 25th EUROMICRO Conference, Milan, Italy, 8/09/99. https://doi.org/10.1109/EURMIC.1999.794780

Experiences from the Pilot operation and commissioning phase of a SCM process improvement program. / Nättinen, Minna; Rahikkala, Tua; Välimäki, Antti.
Proceedings of the 25th EUROMICRO Conference. EUROMICRO 99: Theory and Practice for the New Millennium. Vol. 2 IEEE Institute of Electrical and Electronic Engineers, 1999. p. 185-191 (EUROMICRO Conference, Vol. 25).

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Experiences from the Pilot operation and commissioning phase of a SCM process improvement program

AU - Nättinen, Minna

AU - Rahikkala, Tua

AU - Välimäki, Antti

N1 - Project code: E7SU00254

PY - 1999

Y1 - 1999

N2 - Piloting of new practices and taking them into succesful large-scale use within an organisation are chal-lenging tasks in software process improvement programs.This paper describes an approach to piloting Software Congiguration Management (SCM) practices within an industrial organisation.In this case, the SCM improvement program based on Pr2imer, Practical Process Improvement for Embedded Real-time Software, developed by VTT Electronics.The aim of this paper is to describe the experiences from the pilot operation and commissioning phase of Pr2imer, including collection of SCM metrics, planning and arranging of feedback sessions, as well as analysing of the improvement.

AB - Piloting of new practices and taking them into succesful large-scale use within an organisation are chal-lenging tasks in software process improvement programs.This paper describes an approach to piloting Software Congiguration Management (SCM) practices within an industrial organisation.In this case, the SCM improvement program based on Pr2imer, Practical Process Improvement for Embedded Real-time Software, developed by VTT Electronics.The aim of this paper is to describe the experiences from the pilot operation and commissioning phase of Pr2imer, including collection of SCM metrics, planning and arranging of feedback sessions, as well as analysing of the improvement.

KW - SCM

U2 - 10.1109/EURMIC.1999.794780

DO - 10.1109/EURMIC.1999.794780

M3 - Conference article in proceedings

SN - 978-0-7695-0321-9

VL - 2

T3 - EUROMICRO Conference

SP - 185

EP - 191

BT - Proceedings of the 25th EUROMICRO Conference. EUROMICRO 99

PB - IEEE Institute of Electrical and Electronic Engineers

T2 - 25th EUROMICRO Conference

Y2 - 8 September 1999 through 10 September 1999

ER -

Nättinen M, Rahikkala T, Välimäki A. Experiences from the Pilot operation and commissioning phase of a SCM process improvement program. In Proceedings of the 25th EUROMICRO Conference. EUROMICRO 99: Theory and Practice for the New Millennium. Vol. 2. IEEE Institute of Electrical and Electronic Engineers. 1999. p. 185-191. (EUROMICRO Conference, Vol. 25). doi: 10.1109/EURMIC.1999.794780

Experiences from the Pilot operation and commissioning phase of a SCM process improvement program

Abstract

Publication series

Conference

Keywords

Access to Document

Fingerprint

Cite this