Experiences on the integration of automation CAE and process simulation tools: Case FupRos

Matti Paljakka, Jonni Talsi, Hamid Olia

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Abstract

The development of a process automation concept is very tightly integrated to the development of the related process concept. The controls cannot change the laws of nature; hence a lot of the dynamic behaviour of the plant is determined by the process concept. The understanding of the plant dynamics is a key already in the concept phase and dynamic simulation is practically taken mandatory. To enable the iterative simulation-assisted process automation concept development, validation and verification, Alstom initiated a project for the two-way automatic translation of CAE models and process simulation models. The system was named FupRos.
Original languageEnglish
Title of host publicationAutomaatio XVIII
Place of PublicationHelsinki
Publication statusPublished - 2009
MoE publication typeB3 Non-refereed article in conference proceedings
EventAutomaatio XVIII Seminaari - Helsinki, Finland
Duration: 17 Mar 200918 Mar 2009

Publication series

SeriesSuomen automaatioseura. Julkaisusarja
Number36

Seminar

SeminarAutomaatio XVIII Seminaari
CountryFinland
CityHelsinki
Period17/03/0918/03/09

Fingerprint

Computer aided engineering
Automation
Computer simulation

Keywords

  • automation concept development
  • process simulation
  • tool integration

Cite this

Paljakka, M., Talsi, J., & Olia, H. (2009). Experiences on the integration of automation CAE and process simulation tools: Case FupRos. In Automaatio XVIII Helsinki. Suomen automaatioseura. Julkaisusarja, No. 36
Paljakka, Matti ; Talsi, Jonni ; Olia, Hamid. / Experiences on the integration of automation CAE and process simulation tools : Case FupRos. Automaatio XVIII. Helsinki, 2009. (Suomen automaatioseura. Julkaisusarja; No. 36).
@inproceedings{09acc7a9459642e9bb7e257bf8e2f02b,
title = "Experiences on the integration of automation CAE and process simulation tools: Case FupRos",
abstract = "The development of a process automation concept is very tightly integrated to the development of the related process concept. The controls cannot change the laws of nature; hence a lot of the dynamic behaviour of the plant is determined by the process concept. The understanding of the plant dynamics is a key already in the concept phase and dynamic simulation is practically taken mandatory. To enable the iterative simulation-assisted process automation concept development, validation and verification, Alstom initiated a project for the two-way automatic translation of CAE models and process simulation models. The system was named FupRos.",
keywords = "automation concept development, process simulation, tool integration",
author = "Matti Paljakka and Jonni Talsi and Hamid Olia",
note = "Project code: 20018",
year = "2009",
language = "English",
isbn = "978-952-5183-35-1",
series = "Suomen automaatioseura. Julkaisusarja",
number = "36",
booktitle = "Automaatio XVIII",

}

Paljakka, M, Talsi, J & Olia, H 2009, Experiences on the integration of automation CAE and process simulation tools: Case FupRos. in Automaatio XVIII. Helsinki, Suomen automaatioseura. Julkaisusarja, no. 36, Automaatio XVIII Seminaari, Helsinki, Finland, 17/03/09.

Experiences on the integration of automation CAE and process simulation tools : Case FupRos. / Paljakka, Matti; Talsi, Jonni; Olia, Hamid.

Automaatio XVIII. Helsinki, 2009. (Suomen automaatioseura. Julkaisusarja; No. 36).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

TY - GEN

T1 - Experiences on the integration of automation CAE and process simulation tools

T2 - Case FupRos

AU - Paljakka, Matti

AU - Talsi, Jonni

AU - Olia, Hamid

N1 - Project code: 20018

PY - 2009

Y1 - 2009

N2 - The development of a process automation concept is very tightly integrated to the development of the related process concept. The controls cannot change the laws of nature; hence a lot of the dynamic behaviour of the plant is determined by the process concept. The understanding of the plant dynamics is a key already in the concept phase and dynamic simulation is practically taken mandatory. To enable the iterative simulation-assisted process automation concept development, validation and verification, Alstom initiated a project for the two-way automatic translation of CAE models and process simulation models. The system was named FupRos.

AB - The development of a process automation concept is very tightly integrated to the development of the related process concept. The controls cannot change the laws of nature; hence a lot of the dynamic behaviour of the plant is determined by the process concept. The understanding of the plant dynamics is a key already in the concept phase and dynamic simulation is practically taken mandatory. To enable the iterative simulation-assisted process automation concept development, validation and verification, Alstom initiated a project for the two-way automatic translation of CAE models and process simulation models. The system was named FupRos.

KW - automation concept development

KW - process simulation

KW - tool integration

M3 - Conference article in proceedings

SN - 978-952-5183-35-1

T3 - Suomen automaatioseura. Julkaisusarja

BT - Automaatio XVIII

CY - Helsinki

ER -

Paljakka M, Talsi J, Olia H. Experiences on the integration of automation CAE and process simulation tools: Case FupRos. In Automaatio XVIII. Helsinki. 2009. (Suomen automaatioseura. Julkaisusarja; No. 36).