Fatigue of stainless steel

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Abstract

The 2009b update of ASME III introduces a new set of fatigue design curves. The new curve for austenitic stainless steels is exactly matching with the one endorsed in 2007 by the US NRC for new designs only. This has a notable effect in usage factor calculation at strain amplitudes below 0.5%. However, experimental results clearly demonstrate that a new air curve would not be needed for the studied stainless steel grades.
Original languageEnglish
Title of host publicationBaltica VIII
Subtitle of host publicationLife Management and Maintenance for Power Plants
Place of PublicationEspoo
PublisherVTT Technical Research Centre of Finland
Pages77-94
Volume1
ISBN (Electronic)978-951-38-7592-3
ISBN (Print)978-951-38-7591-6
Publication statusPublished - 2010
MoE publication typeB3 Non-refereed article in conference proceedings
EventBALTICA VIII - International Conference on Life Management and Maintenance for Power Plants - Helsinki-Stockholm, Finland
Duration: 18 May 201020 May 2010

Publication series

NameVTT Symposium
PublisherVTT
Number264
ISSN (Print)0357–9387
ISSN (Electronic)1455–0873

Conference

ConferenceBALTICA VIII - International Conference on Life Management and Maintenance for Power Plants
CountryFinland
CityHelsinki-Stockholm
Period18/05/1020/05/10

Fingerprint

Stainless steel
Fatigue of materials
Austenitic stainless steel
Air

Cite this

Solin, J. (2010). Fatigue of stainless steel. In Baltica VIII: Life Management and Maintenance for Power Plants (Vol. 1, pp. 77-94). Espoo: VTT Technical Research Centre of Finland. VTT Symposium, No. 264
Solin, Jussi. / Fatigue of stainless steel. Baltica VIII: Life Management and Maintenance for Power Plants. Vol. 1 Espoo : VTT Technical Research Centre of Finland, 2010. pp. 77-94 (VTT Symposium; No. 264).
@inproceedings{4c2a85f105904df1a3d4a8ffa9a19795,
title = "Fatigue of stainless steel",
abstract = "The 2009b update of ASME III introduces a new set of fatigue design curves. The new curve for austenitic stainless steels is exactly matching with the one endorsed in 2007 by the US NRC for new designs only. This has a notable effect in usage factor calculation at strain amplitudes below 0.5{\%}. However, experimental results clearly demonstrate that a new air curve would not be needed for the studied stainless steel grades.",
author = "Jussi Solin",
year = "2010",
language = "English",
isbn = "978-951-38-7591-6",
volume = "1",
series = "VTT Symposium",
publisher = "VTT Technical Research Centre of Finland",
number = "264",
pages = "77--94",
booktitle = "Baltica VIII",
address = "Finland",

}

Solin, J 2010, Fatigue of stainless steel. in Baltica VIII: Life Management and Maintenance for Power Plants. vol. 1, VTT Technical Research Centre of Finland, Espoo, VTT Symposium, no. 264, pp. 77-94, BALTICA VIII - International Conference on Life Management and Maintenance for Power Plants, Helsinki-Stockholm, Finland, 18/05/10.

Fatigue of stainless steel. / Solin, Jussi.

Baltica VIII: Life Management and Maintenance for Power Plants. Vol. 1 Espoo : VTT Technical Research Centre of Finland, 2010. p. 77-94 (VTT Symposium; No. 264).

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

TY - GEN

T1 - Fatigue of stainless steel

AU - Solin, Jussi

PY - 2010

Y1 - 2010

N2 - The 2009b update of ASME III introduces a new set of fatigue design curves. The new curve for austenitic stainless steels is exactly matching with the one endorsed in 2007 by the US NRC for new designs only. This has a notable effect in usage factor calculation at strain amplitudes below 0.5%. However, experimental results clearly demonstrate that a new air curve would not be needed for the studied stainless steel grades.

AB - The 2009b update of ASME III introduces a new set of fatigue design curves. The new curve for austenitic stainless steels is exactly matching with the one endorsed in 2007 by the US NRC for new designs only. This has a notable effect in usage factor calculation at strain amplitudes below 0.5%. However, experimental results clearly demonstrate that a new air curve would not be needed for the studied stainless steel grades.

M3 - Conference article in proceedings

SN - 978-951-38-7591-6

VL - 1

T3 - VTT Symposium

SP - 77

EP - 94

BT - Baltica VIII

PB - VTT Technical Research Centre of Finland

CY - Espoo

ER -

Solin J. Fatigue of stainless steel. In Baltica VIII: Life Management and Maintenance for Power Plants. Vol. 1. Espoo: VTT Technical Research Centre of Finland. 2010. p. 77-94. (VTT Symposium; No. 264).