Final report of EUROMET.T-S2 (projects EUROMET 391 and 712)

Supplementary comparison of realizations of the indium freezing point

C. Rauta, E. Renaot, M.H. Valin, M. Elgourdou, F. Adunka, A. van der Linden, A. Steiner, J. Bartu, M. Smid, M. Sindelar, E. Tegeler, U. Noatsch, J-U. Holtoug, V. Chimenti, M. Anagnostou, T. Weckstrøm, et al.

Research output: Contribution to journalArticleScientificpeer-review

Abstract

SUPPLEMENTARY COMPARISON: Comparisons of indium freezing point cells have been carried out by the EUROMET TC-THERM group as Projects Nos 391 and 712. The main objective was to establish the agreement between the realizations of the indium freezing point within different participating laboratories, to identify and eliminate possible discrepancies. The equipment has been made available by BNM-INM. Justervesenet coordinated project no 391, while project 712 was coordinated by BNM-INM. This paper is the final report of the results obtained, including the uncertainties in the comparisons and the degrees of equivalence between the laboratories.
Original languageEnglish
JournalMetrologia
Volume45
Issue numberTechnical Suppl.
DOIs
Publication statusPublished - 2008
MoE publication typeA1 Journal article-refereed

Fingerprint

Freezing
Indium
Uncertainty

Cite this

Rauta, C., Renaot, E., Valin, M. H., Elgourdou, M., Adunka, F., van der Linden, A., ... et al. (2008). Final report of EUROMET.T-S2 (projects EUROMET 391 and 712): Supplementary comparison of realizations of the indium freezing point. Metrologia, 45(Technical Suppl.). https://doi.org/10.1088/0026-1394/45/1A/03001
Rauta, C. ; Renaot, E. ; Valin, M.H. ; Elgourdou, M. ; Adunka, F. ; van der Linden, A. ; Steiner, A. ; Bartu, J. ; Smid, M. ; Sindelar, M. ; Tegeler, E. ; Noatsch, U. ; Holtoug, J-U. ; Chimenti, V. ; Anagnostou, M. ; Weckstrøm, T. ; et al. / Final report of EUROMET.T-S2 (projects EUROMET 391 and 712) : Supplementary comparison of realizations of the indium freezing point. In: Metrologia. 2008 ; Vol. 45, No. Technical Suppl.
@article{aa366a13784e44c3bddbb348b4dc2c10,
title = "Final report of EUROMET.T-S2 (projects EUROMET 391 and 712): Supplementary comparison of realizations of the indium freezing point",
abstract = "SUPPLEMENTARY COMPARISON: Comparisons of indium freezing point cells have been carried out by the EUROMET TC-THERM group as Projects Nos 391 and 712. The main objective was to establish the agreement between the realizations of the indium freezing point within different participating laboratories, to identify and eliminate possible discrepancies. The equipment has been made available by BNM-INM. Justervesenet coordinated project no 391, while project 712 was coordinated by BNM-INM. This paper is the final report of the results obtained, including the uncertainties in the comparisons and the degrees of equivalence between the laboratories.",
author = "C. Rauta and E. Renaot and M.H. Valin and M. Elgourdou and F. Adunka and {van der Linden}, A. and A. Steiner and J. Bartu and M. Smid and M. Sindelar and E. Tegeler and U. Noatsch and J-U. Holtoug and V. Chimenti and M. Anagnostou and T. Weckstr{\o}m and {et al.}",
year = "2008",
doi = "10.1088/0026-1394/45/1A/03001",
language = "English",
volume = "45",
journal = "Metrologia",
issn = "0026-1394",
publisher = "Institute of Physics IOP",
number = "Technical Suppl.",

}

Rauta, C, Renaot, E, Valin, MH, Elgourdou, M, Adunka, F, van der Linden, A, Steiner, A, Bartu, J, Smid, M, Sindelar, M, Tegeler, E, Noatsch, U, Holtoug, J-U, Chimenti, V, Anagnostou, M, Weckstrøm, T & et al. 2008, 'Final report of EUROMET.T-S2 (projects EUROMET 391 and 712): Supplementary comparison of realizations of the indium freezing point', Metrologia, vol. 45, no. Technical Suppl.. https://doi.org/10.1088/0026-1394/45/1A/03001

Final report of EUROMET.T-S2 (projects EUROMET 391 and 712) : Supplementary comparison of realizations of the indium freezing point. / Rauta, C.; Renaot, E.; Valin, M.H.; Elgourdou, M.; Adunka, F.; van der Linden, A.; Steiner, A.; Bartu, J.; Smid, M.; Sindelar, M.; Tegeler, E.; Noatsch, U.; Holtoug, J-U.; Chimenti, V.; Anagnostou, M.; Weckstrøm, T.; et al.

In: Metrologia, Vol. 45, No. Technical Suppl., 2008.

Research output: Contribution to journalArticleScientificpeer-review

TY - JOUR

T1 - Final report of EUROMET.T-S2 (projects EUROMET 391 and 712)

T2 - Supplementary comparison of realizations of the indium freezing point

AU - Rauta, C.

AU - Renaot, E.

AU - Valin, M.H.

AU - Elgourdou, M.

AU - Adunka, F.

AU - van der Linden, A.

AU - Steiner, A.

AU - Bartu, J.

AU - Smid, M.

AU - Sindelar, M.

AU - Tegeler, E.

AU - Noatsch, U.

AU - Holtoug, J-U.

AU - Chimenti, V.

AU - Anagnostou, M.

AU - Weckstrøm, T.

AU - et al., null

PY - 2008

Y1 - 2008

N2 - SUPPLEMENTARY COMPARISON: Comparisons of indium freezing point cells have been carried out by the EUROMET TC-THERM group as Projects Nos 391 and 712. The main objective was to establish the agreement between the realizations of the indium freezing point within different participating laboratories, to identify and eliminate possible discrepancies. The equipment has been made available by BNM-INM. Justervesenet coordinated project no 391, while project 712 was coordinated by BNM-INM. This paper is the final report of the results obtained, including the uncertainties in the comparisons and the degrees of equivalence between the laboratories.

AB - SUPPLEMENTARY COMPARISON: Comparisons of indium freezing point cells have been carried out by the EUROMET TC-THERM group as Projects Nos 391 and 712. The main objective was to establish the agreement between the realizations of the indium freezing point within different participating laboratories, to identify and eliminate possible discrepancies. The equipment has been made available by BNM-INM. Justervesenet coordinated project no 391, while project 712 was coordinated by BNM-INM. This paper is the final report of the results obtained, including the uncertainties in the comparisons and the degrees of equivalence between the laboratories.

UR - http://www.bipm.org/utils/common/pdf/final_reports/T/S2/EUROMET.T-S2.pdf

U2 - 10.1088/0026-1394/45/1A/03001

DO - 10.1088/0026-1394/45/1A/03001

M3 - Article

VL - 45

JO - Metrologia

JF - Metrologia

SN - 0026-1394

IS - Technical Suppl.

ER -