Final report on EURAMET comparison on 1 kg stainless steel mass standards

S. Alisic; B. Gutfeldt; F. Beaudoux; M. Bezjak; M. Coenegrachts; S. Davidson; G. Grgić; R. Hanrahan; J. L.W.A.Van Geel; S. Kacmaz; B. Mangutova-Stoilkovska; M. Miteva; G. Navrozidis; P. T. Neuvonen; L. Nielsen; Maija Ojanen-Saloranta; D. Pantić; A. Pärn; G. F. Popa; L. Snopko; I. Spohr; P. Conceição; M. Stock; Cs Vámossy; C. Wüthrich; T. Žandarova; Z. Zelenka; J. Zůda; Saud M. Alqarni

doi:10.1088/0026-1394/57/1A/07011

Final report on EURAMET comparison on 1 kg stainless steel mass standards

S. Alisic, B. Gutfeldt, F. Beaudoux, M. Bezjak, M. Coenegrachts, S. Davidson, G. Grgić, R. Hanrahan, J. L.W.A.Van Geel, S. Kacmaz, B. Mangutova-Stoilkovska, M. Miteva, G. Navrozidis, P. T. Neuvonen, L. Nielsen, Maija Ojanen-Saloranta, D. Pantić, A. Pärn, G. F. Popa, L. SnopkoI. Spohr, P. Conceição, M. Stock, Cs Vámossy, C. Wüthrich, T. Žandarova, Z. Zelenka, J. Zůda, Saud M. Alqarni

Research output: Contribution to journal › Article › Scientific › peer-review

Abstract

In order to demonstrate the equivalence in calibration of mass standards among National Metrology Institutes (NMIs) of EURAMET this key comparison (KC) on 1 kg stainless steel mass standards has been carried out under the auspices of EURAMET. The comparison was undertaken with reference to the International Prototype Kilogram (IPK) as the definition of the unit of mass. The overall result shows good consistency among the participants. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Original language	English
Article number	07011
Journal	Metrologia
Volume	57
Issue number	1 A
DOIs	https://doi.org/10.1088/0026-1394/57/1A/07011
Publication status	Published - 2020
MoE publication type	A1 Journal article-refereed

Access to Document

10.1088/0026-1394/57/1A/07011

Cite this

Alisic, S., Gutfeldt, B., Beaudoux, F., Bezjak, M., Coenegrachts, M., Davidson, S., Grgić, G., Hanrahan, R., Geel, J. L. W. A. V., Kacmaz, S., Mangutova-Stoilkovska, B., Miteva, M., Navrozidis, G., Neuvonen, P. T., Nielsen, L., Ojanen-Saloranta, M., Pantić, D., Pärn, A., Popa, G. F., ... Alqarni, S. M. (2020). Final report on EURAMET comparison on 1 kg stainless steel mass standards. Metrologia, 57(1 A), Article 07011. https://doi.org/10.1088/0026-1394/57/1A/07011

@article{114fab37756c4447b52291541c854420,

title = "Final report on EURAMET comparison on 1 kg stainless steel mass standards",

abstract = "In order to demonstrate the equivalence in calibration of mass standards among National Metrology Institutes (NMIs) of EURAMET this key comparison (KC) on 1 kg stainless steel mass standards has been carried out under the auspices of EURAMET. The comparison was undertaken with reference to the International Prototype Kilogram (IPK) as the definition of the unit of mass. The overall result shows good consistency among the participants. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).",

author = "S. Alisic and B. Gutfeldt and F. Beaudoux and M. Bezjak and M. Coenegrachts and S. Davidson and G. Grgi{\'c} and R. Hanrahan and Geel, {J. L.W.A.Van} and S. Kacmaz and B. Mangutova-Stoilkovska and M. Miteva and G. Navrozidis and Neuvonen, {P. T.} and L. Nielsen and Maija Ojanen-Saloranta and D. Panti{\'c} and A. P{\"a}rn and Popa, {G. F.} and L. Snopko and I. Spohr and P. Concei{\c c}{\~a}o and M. Stock and Cs V{\'a}mossy and C. W{\"u}thrich and T. {\v Z}andarova and Z. Zelenka and J. Zůda and Alqarni, {Saud M.}",

year = "2020",

doi = "10.1088/0026-1394/57/1A/07011",

language = "English",

volume = "57",

journal = "Metrologia",

issn = "0026-1394",

publisher = "Institute of Physics IOP",

number = "1 A",

}

Alisic, S, Gutfeldt, B, Beaudoux, F, Bezjak, M, Coenegrachts, M, Davidson, S, Grgić, G, Hanrahan, R, Geel, JLWAV, Kacmaz, S, Mangutova-Stoilkovska, B, Miteva, M, Navrozidis, G, Neuvonen, PT, Nielsen, L, Ojanen-Saloranta, M, Pantić, D, Pärn, A, Popa, GF, Snopko, L, Spohr, I, Conceição, P, Stock, M, Vámossy, C, Wüthrich, C, Žandarova, T, Zelenka, Z, Zůda, J & Alqarni, SM 2020, 'Final report on EURAMET comparison on 1 kg stainless steel mass standards', Metrologia, vol. 57, no. 1 A, 07011. https://doi.org/10.1088/0026-1394/57/1A/07011

TY - JOUR

T1 - Final report on EURAMET comparison on 1 kg stainless steel mass standards

AU - Alisic, S.

AU - Gutfeldt, B.

AU - Beaudoux, F.

AU - Bezjak, M.

AU - Coenegrachts, M.

AU - Davidson, S.

AU - Grgić, G.

AU - Hanrahan, R.

AU - Geel, J. L.W.A.Van

AU - Kacmaz, S.

AU - Mangutova-Stoilkovska, B.

AU - Miteva, M.

AU - Navrozidis, G.

AU - Neuvonen, P. T.

AU - Nielsen, L.

AU - Ojanen-Saloranta, Maija

AU - Pantić, D.

AU - Pärn, A.

AU - Popa, G. F.

AU - Snopko, L.

AU - Spohr, I.

AU - Conceição, P.

AU - Stock, M.

AU - Vámossy, Cs

AU - Wüthrich, C.

AU - Žandarova, T.

AU - Zelenka, Z.

AU - Zůda, J.

AU - Alqarni, Saud M.

PY - 2020

Y1 - 2020

N2 - In order to demonstrate the equivalence in calibration of mass standards among National Metrology Institutes (NMIs) of EURAMET this key comparison (KC) on 1 kg stainless steel mass standards has been carried out under the auspices of EURAMET. The comparison was undertaken with reference to the International Prototype Kilogram (IPK) as the definition of the unit of mass. The overall result shows good consistency among the participants. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

AB - In order to demonstrate the equivalence in calibration of mass standards among National Metrology Institutes (NMIs) of EURAMET this key comparison (KC) on 1 kg stainless steel mass standards has been carried out under the auspices of EURAMET. The comparison was undertaken with reference to the International Prototype Kilogram (IPK) as the definition of the unit of mass. The overall result shows good consistency among the participants. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

UR - http://www.scopus.com/inward/record.url?scp=85082748534&partnerID=8YFLogxK

U2 - 10.1088/0026-1394/57/1A/07011

DO - 10.1088/0026-1394/57/1A/07011

M3 - Article

AN - SCOPUS:85082748534

SN - 0026-1394

VL - 57

JO - Metrologia

JF - Metrologia

IS - 1 A

M1 - 07011

ER -

Final report on EURAMET comparison on 1 kg stainless steel mass standards

Abstract

Access to Document

Other files and links

Fingerprint

Cite this