First results from the 10Be marker experiment in JET with ITER-like wall

H. Bergsåker; G. Possnert; I. Bykov; K. Heinola; P. Petersson; J. Miettunen; A. Widdowson; V. Riccardo; I. Nunes; M. Stamp; S. Brezinsek; M. Groth; T. Kurki-Suonio; Jari Likonen; J.P. Coad; D. Borodin; A. Kirschner; K. Schmid; K. Krieger; JET-EFDA contributors

doi:10.1088/0029-5515/54/8/082004

First results from the ¹⁰Be marker experiment in JET with ITER-like wall

H. Bergsåker
, G. Possnert
, I. Bykov
, K. Heinola
, P. Petersson
, J. Miettunen
, A. Widdowson
, V. Riccardo
, I. Nunes
, M. Stamp
, S. Brezinsek
, M. Groth
, T. Kurki-Suonio
, Jari Likonen
, J.P. Coad
, D. Borodin
, A. Kirschner
, K. Schmid
, K. Krieger
, JET-EFDA contributors

Culham Science Centre
KTH Royal Institute of Technology
Uppsala University
University of Helsinki
Max-Planck-Institut für Plasmaphysik (IPP)
Forschungszentrum Jülich GmbH (FZJ)
European Atomic Energy Community (Euratom)
Aalto University

Research output: Contribution to journal › Article › Scientific › peer-review

5 Citations (Scopus)

Abstract

When the ITER-like wall was installed in JET, one of the 218 Be inner wall guard limiter tiles had been enriched with ¹⁰Be as a bulk isotopic marker. During the shutdown in 2012-2013, a set of tiles were sampled nondestructively to collect material for accelerator mass spectroscopy measurements of ¹⁰Be concentration. The letter shows how the marker experiment was set up, presents first results and compares them to preliminary predictions of marker redistribution, made with the ASCOT numerical code. Finally an outline is shown of what experimental data are likely to become available later and the possibilities for comparison with modelling using the WallDYN, ERO and ASCOT codes are discussed.

Original language	English
Number of pages	4
Journal	Nuclear Fusion
Volume	54
Issue number	8
DOIs	https://doi.org/10.1088/0029-5515/54/8/082004
Publication status	Published - 2014
MoE publication type	A1 Journal article-refereed

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

plasma physics
tokamaks
plasma devices
erosion
materials
divertors

Access to Document

10.1088/0029-5515/54/8/082004

Cite this

Bergsåker, H., Possnert, G., Bykov, I., Heinola, K., Petersson, P., Miettunen, J., Widdowson, A., Riccardo, V., Nunes, I., Stamp, M., Brezinsek, S., Groth, M., Kurki-Suonio, T., Likonen, J., Coad, J. P., Borodin, D., Kirschner, A., Schmid, K., Krieger, K., & JET-EFDA contributors (2014). First results from the ¹⁰Be marker experiment in JET with ITER-like wall. Nuclear Fusion, 54(8). https://doi.org/10.1088/0029-5515/54/8/082004

@article{fac7fc96af534164b778c7dbafe2ad0e,

title = "First results from the 10Be marker experiment in JET with ITER-like wall",

abstract = "When the ITER-like wall was installed in JET, one of the 218 Be inner wall guard limiter tiles had been enriched with 10Be as a bulk isotopic marker. During the shutdown in 2012-2013, a set of tiles were sampled nondestructively to collect material for accelerator mass spectroscopy measurements of 10Be concentration. The letter shows how the marker experiment was set up, presents first results and compares them to preliminary predictions of marker redistribution, made with the ASCOT numerical code. Finally an outline is shown of what experimental data are likely to become available later and the possibilities for comparison with modelling using the WallDYN, ERO and ASCOT codes are discussed.",

keywords = "plasma physics, tokamaks, plasma devices, erosion, materials, divertors",

author = "H. Bergs{\aa}ker and G. Possnert and I. Bykov and K. Heinola and P. Petersson and J. Miettunen and A. Widdowson and V. Riccardo and I. Nunes and M. Stamp and S. Brezinsek and M. Groth and T. Kurki-Suonio and Jari Likonen and J.P. Coad and D. Borodin and A. Kirschner and K. Schmid and K. Krieger and \{JET-EFDA contributors\}",

year = "2014",

doi = "10.1088/0029-5515/54/8/082004",

language = "English",

volume = "54",

journal = "Nuclear Fusion",

issn = "0029-5515",

publisher = "Institute of Physics IOP",

number = "8",

}

Bergsåker, H, Possnert, G, Bykov, I, Heinola, K, Petersson, P, Miettunen, J, Widdowson, A, Riccardo, V, Nunes, I, Stamp, M, Brezinsek, S, Groth, M, Kurki-Suonio, T, Likonen, J, Coad, JP, Borodin, D, Kirschner, A, Schmid, K, Krieger, K & JET-EFDA contributors 2014, 'First results from the ¹⁰Be marker experiment in JET with ITER-like wall', Nuclear Fusion, vol. 54, no. 8. https://doi.org/10.1088/0029-5515/54/8/082004

TY - JOUR

T1 - First results from the 10Be marker experiment in JET with ITER-like wall

AU - Bergsåker, H.

AU - Possnert, G.

AU - Bykov, I.

AU - Heinola, K.

AU - Petersson, P.

AU - Miettunen, J.

AU - Widdowson, A.

AU - Riccardo, V.

AU - Nunes, I.

AU - Stamp, M.

AU - Brezinsek, S.

AU - Groth, M.

AU - Kurki-Suonio, T.

AU - Likonen, Jari

AU - Coad, J.P.

AU - Borodin, D.

AU - Kirschner, A.

AU - Schmid, K.

AU - Krieger, K.

AU - JET-EFDA contributors

PY - 2014

Y1 - 2014

N2 - When the ITER-like wall was installed in JET, one of the 218 Be inner wall guard limiter tiles had been enriched with 10Be as a bulk isotopic marker. During the shutdown in 2012-2013, a set of tiles were sampled nondestructively to collect material for accelerator mass spectroscopy measurements of 10Be concentration. The letter shows how the marker experiment was set up, presents first results and compares them to preliminary predictions of marker redistribution, made with the ASCOT numerical code. Finally an outline is shown of what experimental data are likely to become available later and the possibilities for comparison with modelling using the WallDYN, ERO and ASCOT codes are discussed.

AB - When the ITER-like wall was installed in JET, one of the 218 Be inner wall guard limiter tiles had been enriched with 10Be as a bulk isotopic marker. During the shutdown in 2012-2013, a set of tiles were sampled nondestructively to collect material for accelerator mass spectroscopy measurements of 10Be concentration. The letter shows how the marker experiment was set up, presents first results and compares them to preliminary predictions of marker redistribution, made with the ASCOT numerical code. Finally an outline is shown of what experimental data are likely to become available later and the possibilities for comparison with modelling using the WallDYN, ERO and ASCOT codes are discussed.

KW - plasma physics

KW - tokamaks

KW - plasma devices

KW - erosion

KW - materials

KW - divertors

U2 - 10.1088/0029-5515/54/8/082004

DO - 10.1088/0029-5515/54/8/082004

M3 - Article

SN - 0029-5515

VL - 54

JO - Nuclear Fusion

JF - Nuclear Fusion

IS - 8

ER -