Gravure printed low voltage polymer transistors and inverters

Tomi Hassinen (Corresponding Author), Henrik GO Sandberg

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Abstract

We present a gravure printed low voltage transistor using commercial polymer materials. Patterned thin layers (down to 200 nm) were formed by single printing steps on polyethylene terephthalate substrates which had pre-patterned metal electrodes. Materials were air stable and there was no need for substrate or metal electrode pre-treatment. Good electrical performance with minimal hysteresis was achieved. Low voltage operation is demonstrated with inverter circuits, which operate down to 5 volts.
Original languageEnglish
Pages (from-to)585-589
Number of pages5
JournalThin Solid Films
Volume548
DOIs
Publication statusPublished - 2013
MoE publication typeA1 Journal article-refereed

Fingerprint

inverters
low voltage
Polymers
Transistors
transistors
Metals
Electrodes
Polyethylene Terephthalates
electrodes
polyethylene terephthalate
polymers
Electric potential
Substrates
printing
pretreatment
Polyethylene terephthalates
metals
Hysteresis
Printing
hysteresis

Cite this

@article{c169480533ea441dbc28cf5fab861749,
title = "Gravure printed low voltage polymer transistors and inverters",
abstract = "We present a gravure printed low voltage transistor using commercial polymer materials. Patterned thin layers (down to 200 nm) were formed by single printing steps on polyethylene terephthalate substrates which had pre-patterned metal electrodes. Materials were air stable and there was no need for substrate or metal electrode pre-treatment. Good electrical performance with minimal hysteresis was achieved. Low voltage operation is demonstrated with inverter circuits, which operate down to 5 volts.",
author = "Tomi Hassinen and Sandberg, {Henrik GO}",
year = "2013",
doi = "10.1016/j.tsf.2013.09.070",
language = "English",
volume = "548",
pages = "585--589",
journal = "Thin Solid Films",
issn = "0040-6090",
publisher = "Elsevier",

}

Gravure printed low voltage polymer transistors and inverters. / Hassinen, Tomi (Corresponding Author); Sandberg, Henrik GO.

In: Thin Solid Films, Vol. 548, 2013, p. 585-589.

Research output: Contribution to journalArticleScientificpeer-review

TY - JOUR

T1 - Gravure printed low voltage polymer transistors and inverters

AU - Hassinen, Tomi

AU - Sandberg, Henrik GO

PY - 2013

Y1 - 2013

N2 - We present a gravure printed low voltage transistor using commercial polymer materials. Patterned thin layers (down to 200 nm) were formed by single printing steps on polyethylene terephthalate substrates which had pre-patterned metal electrodes. Materials were air stable and there was no need for substrate or metal electrode pre-treatment. Good electrical performance with minimal hysteresis was achieved. Low voltage operation is demonstrated with inverter circuits, which operate down to 5 volts.

AB - We present a gravure printed low voltage transistor using commercial polymer materials. Patterned thin layers (down to 200 nm) were formed by single printing steps on polyethylene terephthalate substrates which had pre-patterned metal electrodes. Materials were air stable and there was no need for substrate or metal electrode pre-treatment. Good electrical performance with minimal hysteresis was achieved. Low voltage operation is demonstrated with inverter circuits, which operate down to 5 volts.

U2 - 10.1016/j.tsf.2013.09.070

DO - 10.1016/j.tsf.2013.09.070

M3 - Article

VL - 548

SP - 585

EP - 589

JO - Thin Solid Films

JF - Thin Solid Films

SN - 0040-6090

ER -