High temperature corrosion of thermally sprayed NiCr- and amorphous Fe-based coatings covered with a KCl-K2SO4 salt mixture

Tommi Varis, Dorota Bankiewicz, Patrik Yrjas, Tommi Suhonen, Satu Tuurna, Kimmo Ruusuvuori, Stefan Holmström, Jorma Salonen

    Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

    Original languageEnglish
    Title of host publicationMaterials for advanced power engineering 2010
    Subtitle of host publicationProceedings of the 9th Liege Conference on Materials for Advanced Power Engineering, September 27-29th, 2010, Liège, Belgium
    EditorsJ. Lecomte-Beckers, Q. Contrepois, T. Beck, B. Kuhn
    Pages846-856
    ISBN (Electronic)978-3-89336-685-9
    Publication statusPublished - 2010
    MoE publication typeA4 Article in a conference publication

    Publication series

    SeriesSchriften des Forschungszentrums Jülich: Reihe Energie & Umwelt/Energy & Environment
    Volume94
    ISSN1866-1793

    Keywords

    • thermal sprayed coatings
    • high temperature corrosion
    • chlorine corrosion
    • boiler

    Cite this

    Varis, T., Bankiewicz, D., Yrjas, P., Suhonen, T., Tuurna, S., Ruusuvuori, K., ... Salonen, J. (2010). High temperature corrosion of thermally sprayed NiCr- and amorphous Fe-based coatings covered with a KCl-K2SO4 salt mixture. In J. Lecomte-Beckers, Q. Contrepois, T. Beck, & B. Kuhn (Eds.), Materials for advanced power engineering 2010: Proceedings of the 9th Liege Conference on Materials for Advanced Power Engineering, September 27-29th, 2010, Liège, Belgium (pp. 846-856). Schriften des Forschungszentrums Jülich: Reihe Energie & Umwelt/Energy & Environment, Vol.. 94
    Varis, Tommi ; Bankiewicz, Dorota ; Yrjas, Patrik ; Suhonen, Tommi ; Tuurna, Satu ; Ruusuvuori, Kimmo ; Holmström, Stefan ; Salonen, Jorma. / High temperature corrosion of thermally sprayed NiCr- and amorphous Fe-based coatings covered with a KCl-K2SO4 salt mixture. Materials for advanced power engineering 2010: Proceedings of the 9th Liege Conference on Materials for Advanced Power Engineering, September 27-29th, 2010, Liège, Belgium. editor / J. Lecomte-Beckers ; Q. Contrepois ; T. Beck ; B. Kuhn. 2010. pp. 846-856 (Schriften des Forschungszentrums Jülich: Reihe Energie & Umwelt/Energy & Environment, Vol. 94).
    @inproceedings{e009977c1dda4703ba6bfb9a3e295250,
    title = "High temperature corrosion of thermally sprayed NiCr- and amorphous Fe-based coatings covered with a KCl-K2SO4 salt mixture",
    keywords = "thermal sprayed coatings, high temperature corrosion, chlorine corrosion, boiler",
    author = "Tommi Varis and Dorota Bankiewicz and Patrik Yrjas and Tommi Suhonen and Satu Tuurna and Kimmo Ruusuvuori and Stefan Holmstr{\"o}m and Jorma Salonen",
    note = "Project code: 17344",
    year = "2010",
    language = "English",
    series = "Schriften des Forschungszentrums J{\"u}lich: Reihe Energie & Umwelt/Energy & Environment",
    pages = "846--856",
    editor = "J. Lecomte-Beckers and Q. Contrepois and T. Beck and B. Kuhn",
    booktitle = "Materials for advanced power engineering 2010",

    }

    Varis, T, Bankiewicz, D, Yrjas, P, Suhonen, T, Tuurna, S, Ruusuvuori, K, Holmström, S & Salonen, J 2010, High temperature corrosion of thermally sprayed NiCr- and amorphous Fe-based coatings covered with a KCl-K2SO4 salt mixture. in J Lecomte-Beckers, Q Contrepois, T Beck & B Kuhn (eds), Materials for advanced power engineering 2010: Proceedings of the 9th Liege Conference on Materials for Advanced Power Engineering, September 27-29th, 2010, Liège, Belgium. Schriften des Forschungszentrums Jülich: Reihe Energie & Umwelt/Energy & Environment, vol. 94, pp. 846-856.

    High temperature corrosion of thermally sprayed NiCr- and amorphous Fe-based coatings covered with a KCl-K2SO4 salt mixture. / Varis, Tommi; Bankiewicz, Dorota; Yrjas, Patrik; Suhonen, Tommi; Tuurna, Satu; Ruusuvuori, Kimmo; Holmström, Stefan; Salonen, Jorma.

    Materials for advanced power engineering 2010: Proceedings of the 9th Liege Conference on Materials for Advanced Power Engineering, September 27-29th, 2010, Liège, Belgium. ed. / J. Lecomte-Beckers; Q. Contrepois; T. Beck; B. Kuhn. 2010. p. 846-856 (Schriften des Forschungszentrums Jülich: Reihe Energie & Umwelt/Energy & Environment, Vol. 94).

    Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

    TY - GEN

    T1 - High temperature corrosion of thermally sprayed NiCr- and amorphous Fe-based coatings covered with a KCl-K2SO4 salt mixture

    AU - Varis, Tommi

    AU - Bankiewicz, Dorota

    AU - Yrjas, Patrik

    AU - Suhonen, Tommi

    AU - Tuurna, Satu

    AU - Ruusuvuori, Kimmo

    AU - Holmström, Stefan

    AU - Salonen, Jorma

    N1 - Project code: 17344

    PY - 2010

    Y1 - 2010

    KW - thermal sprayed coatings

    KW - high temperature corrosion

    KW - chlorine corrosion

    KW - boiler

    M3 - Conference article in proceedings

    T3 - Schriften des Forschungszentrums Jülich: Reihe Energie & Umwelt/Energy & Environment

    SP - 846

    EP - 856

    BT - Materials for advanced power engineering 2010

    A2 - Lecomte-Beckers, J.

    A2 - Contrepois, Q.

    A2 - Beck, T.

    A2 - Kuhn, B.

    ER -

    Varis T, Bankiewicz D, Yrjas P, Suhonen T, Tuurna S, Ruusuvuori K et al. High temperature corrosion of thermally sprayed NiCr- and amorphous Fe-based coatings covered with a KCl-K2SO4 salt mixture. In Lecomte-Beckers J, Contrepois Q, Beck T, Kuhn B, editors, Materials for advanced power engineering 2010: Proceedings of the 9th Liege Conference on Materials for Advanced Power Engineering, September 27-29th, 2010, Liège, Belgium. 2010. p. 846-856. (Schriften des Forschungszentrums Jülich: Reihe Energie & Umwelt/Energy & Environment, Vol. 94).