Implementation of a bumpless switch in axial magnetic bearings

Alexander Smirnov; Kimmo Tolsa; Rafal P. Jastrzebski

doi:10.1109/SIES.2010.5551368

Implementation of a bumpless switch in axial magnetic bearings

Alexander Smirnov^*, Kimmo Tolsa, Rafal P. Jastrzebski

^*Corresponding author for this work

Not published at VTT

Lappeenranta-Lahti University of Technology LUT

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

5 Citations (Scopus)

Abstract

In this work, hardware and software issues of building a control system for axial magnetic bearings are considered. The third generation of magnetic bearings requires self-tuning and self-calibration. These techniques should be complemented by an option of a controller switch in operational processes. An implementation of a bumpless method is discussed for cases that solve the problem of system instability and signal overshoot during switching.

Original language	English
Title of host publication	2010 International Symposium on Industrial Embedded Systems, SIES 2010
Publisher	IEEE Institute of Electrical and Electronic Engineers
Pages	63-68
ISBN (Electronic)	978-1-4244-5840-0, 978-1-4244-5841-7
ISBN (Print)	978-1-4244-5839-4
DOIs	https://doi.org/10.1109/SIES.2010.5551368
Publication status	Published - 11 Oct 2010
MoE publication type	A4 Article in a conference publication
Event	International Symposium on Industrial Embedded Systems, SIES 2010 - Trento, Italy Duration: 7 Jul 2010 → 9 Jul 2010 Conference number: 5

Conference

Conference	International Symposium on Industrial Embedded Systems, SIES 2010
Country/Territory	Italy
City	Trento
Period	7/07/10 → 9/07/10

Access to Document

10.1109/SIES.2010.5551368

Cite this

@inproceedings{93c385e0ebd74b62aa4af9c9e9143407,

title = "Implementation of a bumpless switch in axial magnetic bearings",

abstract = "In this work, hardware and software issues of building a control system for axial magnetic bearings are considered. The third generation of magnetic bearings requires self-tuning and self-calibration. These techniques should be complemented by an option of a controller switch in operational processes. An implementation of a bumpless method is discussed for cases that solve the problem of system instability and signal overshoot during switching.",

author = "Alexander Smirnov and Kimmo Tolsa and Jastrzebski, {Rafal P.}",

year = "2010",

month = oct,

day = "11",

doi = "10.1109/SIES.2010.5551368",

language = "English",

isbn = "978-1-4244-5839-4",

pages = "63--68",

booktitle = "2010 International Symposium on Industrial Embedded Systems, SIES 2010",

publisher = "IEEE Institute of Electrical and Electronic Engineers",

address = "United States",

note = "International Symposium on Industrial Embedded Systems, SIES 2010 ; Conference date: 07-07-2010 Through 09-07-2010",

}

Smirnov, A, Tolsa, K & Jastrzebski, RP 2010, Implementation of a bumpless switch in axial magnetic bearings. in 2010 International Symposium on Industrial Embedded Systems, SIES 2010. IEEE Institute of Electrical and Electronic Engineers, pp. 63-68, International Symposium on Industrial Embedded Systems, SIES 2010, Trento, Italy, 7/07/10. https://doi.org/10.1109/SIES.2010.5551368

Implementation of a bumpless switch in axial magnetic bearings. / Smirnov, Alexander; Tolsa, Kimmo; Jastrzebski, Rafal P.
2010 International Symposium on Industrial Embedded Systems, SIES 2010. IEEE Institute of Electrical and Electronic Engineers, 2010. p. 63-68.

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Implementation of a bumpless switch in axial magnetic bearings

AU - Smirnov, Alexander

AU - Tolsa, Kimmo

AU - Jastrzebski, Rafal P.

N1 - Conference code: 5

PY - 2010/10/11

Y1 - 2010/10/11

N2 - In this work, hardware and software issues of building a control system for axial magnetic bearings are considered. The third generation of magnetic bearings requires self-tuning and self-calibration. These techniques should be complemented by an option of a controller switch in operational processes. An implementation of a bumpless method is discussed for cases that solve the problem of system instability and signal overshoot during switching.

AB - In this work, hardware and software issues of building a control system for axial magnetic bearings are considered. The third generation of magnetic bearings requires self-tuning and self-calibration. These techniques should be complemented by an option of a controller switch in operational processes. An implementation of a bumpless method is discussed for cases that solve the problem of system instability and signal overshoot during switching.

UR - http://www.scopus.com/inward/record.url?scp=77957568862&partnerID=8YFLogxK

U2 - 10.1109/SIES.2010.5551368

DO - 10.1109/SIES.2010.5551368

M3 - Conference article in proceedings

AN - SCOPUS:77957568862

SN - 978-1-4244-5839-4

SP - 63

EP - 68

BT - 2010 International Symposium on Industrial Embedded Systems, SIES 2010

PB - IEEE Institute of Electrical and Electronic Engineers

T2 - International Symposium on Industrial Embedded Systems, SIES 2010

Y2 - 7 July 2010 through 9 July 2010

ER -

Implementation of a bumpless switch in axial magnetic bearings

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this