Implementing a prototyping network for injection moulded imaging lenses in Finland

Kimmo Keränen; Jukka-Tapani Mäkinen; Esko, J. Pääkkönen; Matti Koponen; Mikko Karttunen; Jussi Hiltunen; Pentti Karioja

doi:10.1117/12.625118

Implementing a prototyping network for injection moulded imaging lenses in Finland

Kimmo Keränen
, Jukka-Tapani Mäkinen
, Esko, J. Pääkkönen
, Matti Koponen
, Mikko Karttunen
, Jussi Hiltunen
, Pentti Karioja

Perlos Oyj

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

3 Citations (Scopus)

Original language	English
Title of host publication	Optical Fabrication, Testing, and Metrology II
Editors	Angela Duparré, Roland Geyl, Lingli Wang
Publisher	International Society for Optics and Photonics SPIE
Pages	452-460
DOIs	https://doi.org/10.1117/12.625118
Publication status	Published - 2005
MoE publication type	A4 Article in a conference publication
Event	Optical Systems Design 2005 - Jena, Germany Duration: 12 Sept 2005 → 16 Sept 2005

Publication series

Series	Proceedings of SPIE
Volume	5965
ISSN	0277-786X

Conference

Conference	Optical Systems Design 2005
Country/Territory	Germany
City	Jena
Period	12/09/05 → 16/09/05

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1117/12.625118

Cite this

Keränen, K., Mäkinen, J.-T., Pääkkönen, E. J., Koponen, M., Karttunen, M., Hiltunen, J., & Karioja, P. (2005). Implementing a prototyping network for injection moulded imaging lenses in Finland. In A. Duparré, R. Geyl, & L. Wang (Eds.), Optical Fabrication, Testing, and Metrology II (pp. 452-460). International Society for Optics and Photonics SPIE. https://doi.org/10.1117/12.625118

@inproceedings{92d1a5aa07014bc8bb77bbec7d63ac22,

title = "Implementing a prototyping network for injection moulded imaging lenses in Finland",

author = "Kimmo Ker{\"a}nen and Jukka-Tapani M{\"a}kinen and P{\"a}{\"a}kk{\"o}nen, \{Esko, J.\} and Matti Koponen and Mikko Karttunen and Jussi Hiltunen and Pentti Karioja",

year = "2005",

doi = "10.1117/12.625118",

language = "English",

series = "Proceedings of SPIE",

publisher = "International Society for Optics and Photonics SPIE",

pages = "452--460",

editor = "Angela Duparr{\'e} and Roland Geyl and Lingli Wang",

booktitle = "Optical Fabrication, Testing, and Metrology II",

address = "United States",

note = "Optical Systems Design 2005 ; Conference date: 12-09-2005 Through 16-09-2005",

}

Keränen, K, Mäkinen, J-T, Pääkkönen, EJ, Koponen, M, Karttunen, M, Hiltunen, J & Karioja, P 2005, Implementing a prototyping network for injection moulded imaging lenses in Finland. in A Duparré, R Geyl & L Wang (eds), Optical Fabrication, Testing, and Metrology II. International Society for Optics and Photonics SPIE, Proceedings of SPIE, vol. 5965, pp. 452-460, Optical Systems Design 2005, Jena, Thuringia, Germany, 12/09/05. https://doi.org/10.1117/12.625118

Implementing a prototyping network for injection moulded imaging lenses in Finland. / Keränen, Kimmo; Mäkinen, Jukka-Tapani; Pääkkönen, Esko, J. et al.
Optical Fabrication, Testing, and Metrology II. ed. / Angela Duparré; Roland Geyl; Lingli Wang. International Society for Optics and Photonics SPIE, 2005. p. 452-460 (Proceedings of SPIE, Vol. 5965).

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Implementing a prototyping network for injection moulded imaging lenses in Finland

AU - Keränen, Kimmo

AU - Mäkinen, Jukka-Tapani

AU - Pääkkönen, Esko, J.

AU - Koponen, Matti

AU - Karttunen, Mikko

AU - Hiltunen, Jussi

AU - Karioja, Pentti

PY - 2005

Y1 - 2005

U2 - 10.1117/12.625118

DO - 10.1117/12.625118

M3 - Conference article in proceedings

T3 - Proceedings of SPIE

SP - 452

EP - 460

BT - Optical Fabrication, Testing, and Metrology II

A2 - Duparré, Angela

A2 - Geyl, Roland

A2 - Wang, Lingli

PB - International Society for Optics and Photonics SPIE

T2 - Optical Systems Design 2005

Y2 - 12 September 2005 through 16 September 2005

ER -

Keränen K, Mäkinen JT, Pääkkönen EJ, Koponen M, Karttunen M, Hiltunen J et al. Implementing a prototyping network for injection moulded imaging lenses in Finland. In Duparré A, Geyl R, Wang L, editors, Optical Fabrication, Testing, and Metrology II. International Society for Optics and Photonics SPIE. 2005. p. 452-460. (Proceedings of SPIE, Vol. 5965). doi: 10.1117/12.625118