Integration of design and assembly using augmented reality

Juha Sääski; Tapio Salonen; Mika Hakkarainen; Sanni Siltanen; Charles Woodward; Juhani Lempiäinen

doi:10.1007/978-0-387-77405-3_39

Integration of design and assembly using augmented reality

Juha Sääski
, Tapio Salonen
, Mika Hakkarainen
, Sanni Siltanen
, Charles Woodward
, Juhani Lempiäinen

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

54 Citations (Scopus)

Abstract

This paper presents a methodology and a system for augmented reality aided assembly work. We concentrate in particular on the requirements on information processing and data flow for implementing augmented assembly systems in real life production environments. A pilot case with an augmented assembly task at the Finnish tractor company Valtra is described.

Original language	English
Title of host publication	Proceedings of the 4th International Precision Assembly Seminar, IPAS 2008
Subtitle of host publication	Micro-Assembly Technologies and Applications
Editors	S. Ratchev, S. Koelemeijer
Place of Publication	New York
Publisher	Springer
Pages	395-404
ISBN (Electronic)	978-0-387-77405-3
ISBN (Print)	978-0-387-77402-2
DOIs	https://doi.org/10.1007/978-0-387-77405-3_39
Publication status	Published - 2008
MoE publication type	A4 Article in a conference publication
Event	IFIP TC5 WG 5.5 Fourth International Precision Assembly Seminar, IPAS 2008: Micro-Assembly Technologies and Applications - Chamonix, Switzerland Duration: 10 Feb 2008 → 13 Feb 2008

Conference

Conference	IFIP TC5 WG 5.5 Fourth International Precision Assembly Seminar, IPAS 2008
Country/Territory	Switzerland
City	Chamonix
Period	10/02/08 → 13/02/08

Keywords

Assembly instruction
Assembly work
Augmented reality
CAD
PDM

Access to Document

10.1007/978-0-387-77405-3_39

Cite this

Sääski, J., Salonen, T., Hakkarainen, M., Siltanen, S., Woodward, C., & Lempiäinen, J. (2008). Integration of design and assembly using augmented reality. In S. Ratchev, & S. Koelemeijer (Eds.), Proceedings of the 4th International Precision Assembly Seminar, IPAS 2008: Micro-Assembly Technologies and Applications (pp. 395-404). Springer. https://doi.org/10.1007/978-0-387-77405-3_39

@inproceedings{d3ccaf4afb7c4c91b1b051a17f9f3140,

title = "Integration of design and assembly using augmented reality",

abstract = "This paper presents a methodology and a system for augmented reality aided assembly work. We concentrate in particular on the requirements on information processing and data flow for implementing augmented assembly systems in real life production environments. A pilot case with an augmented assembly task at the Finnish tractor company Valtra is described.",

keywords = "Assembly instruction, Assembly work, Augmented reality, CAD, PDM",

author = "Juha S{\"a}{\"a}ski and Tapio Salonen and Mika Hakkarainen and Sanni Siltanen and Charles Woodward and Juhani Lempi{\"a}inen",

year = "2008",

doi = "10.1007/978-0-387-77405-3\_39",

language = "English",

isbn = "978-0-387-77402-2",

pages = "395--404",

editor = "S. Ratchev and S. Koelemeijer",

booktitle = "Proceedings of the 4th International Precision Assembly Seminar, IPAS 2008",

publisher = "Springer",

address = "Germany",

note = "IFIP TC5 WG 5.5 Fourth International Precision Assembly Seminar, IPAS 2008 : Micro-Assembly Technologies and Applications ; Conference date: 10-02-2008 Through 13-02-2008",

}

Sääski, J, Salonen, T, Hakkarainen, M, Siltanen, S, Woodward, C & Lempiäinen, J 2008, Integration of design and assembly using augmented reality. in S Ratchev & S Koelemeijer (eds), Proceedings of the 4th International Precision Assembly Seminar, IPAS 2008: Micro-Assembly Technologies and Applications. Springer, New York, pp. 395-404, IFIP TC5 WG 5.5 Fourth International Precision Assembly Seminar, IPAS 2008, Chamonix, Switzerland, 10/02/08. https://doi.org/10.1007/978-0-387-77405-3_39

Integration of design and assembly using augmented reality. / Sääski, Juha; Salonen, Tapio; Hakkarainen, Mika et al.
Proceedings of the 4th International Precision Assembly Seminar, IPAS 2008: Micro-Assembly Technologies and Applications. ed. / S. Ratchev; S. Koelemeijer. New York: Springer, 2008. p. 395-404.

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Integration of design and assembly using augmented reality

AU - Sääski, Juha

AU - Salonen, Tapio

AU - Hakkarainen, Mika

AU - Siltanen, Sanni

AU - Woodward, Charles

AU - Lempiäinen, Juhani

PY - 2008

Y1 - 2008

N2 - This paper presents a methodology and a system for augmented reality aided assembly work. We concentrate in particular on the requirements on information processing and data flow for implementing augmented assembly systems in real life production environments. A pilot case with an augmented assembly task at the Finnish tractor company Valtra is described.

AB - This paper presents a methodology and a system for augmented reality aided assembly work. We concentrate in particular on the requirements on information processing and data flow for implementing augmented assembly systems in real life production environments. A pilot case with an augmented assembly task at the Finnish tractor company Valtra is described.

KW - Assembly instruction

KW - Assembly work

KW - Augmented reality

KW - CAD

KW - PDM

U2 - 10.1007/978-0-387-77405-3_39

DO - 10.1007/978-0-387-77405-3_39

M3 - Conference article in proceedings

SN - 978-0-387-77402-2

SP - 395

EP - 404

BT - Proceedings of the 4th International Precision Assembly Seminar, IPAS 2008

A2 - Ratchev, S.

A2 - Koelemeijer, S.

PB - Springer

CY - New York

T2 - IFIP TC5 WG 5.5 Fourth International Precision Assembly Seminar, IPAS 2008

Y2 - 10 February 2008 through 13 February 2008

ER -

Integration of design and assembly using augmented reality

Abstract

Conference

Keywords

Access to Document

Fingerprint

Cite this