Investigations towards extrapolation approaches for torque transducer characteristics

P. Weidinger; G. Foyer; Jussi Ala-Hiiro; C. Schlegel; R. Kumme

doi:10.1088/1742-6596/1065/4/042057

Investigations towards extrapolation approaches for torque transducer characteristics

P. Weidinger, G. Foyer, Jussi Ala-Hiiro, C. Schlegel, R. Kumme

German National Metrology Institute (PTB)

Research output: Contribution to journal › Article › Scientific › peer-review

7 Citations (Scopus)

Abstract

For torque transducers above 1.1 MNm, no traceable measurement has been possible to date. Therefore, an extrapolation method deploying measurement data from partial ranges is to be developed. Both partial and full range measurements up to 20 kN m are performed to gather data for implementing an extrapolation approach. The extrapolated data is evaluated, and the results are compared to the full range results.

Original language	English
Article number	042057
Journal	Journal of Physics: Conference Series
Volume	1065
Issue number	4
DOIs	https://doi.org/10.1088/1742-6596/1065/4/042057
Publication status	Published - 2018
MoE publication type	Not Eligible
Event	22nd World Congress of the International Measurement Confederation, IMEKO 2018 - Belfast, United Kingdom Duration: 3 Sept 2018 → 6 Sept 2018

Access to Document

10.1088/1742-6596/1065/4/042057

Cite this

@article{2b76c23c1fe64ccaa7faa74a3fc14cc6,

title = "Investigations towards extrapolation approaches for torque transducer characteristics",

abstract = "For torque transducers above 1.1 MNm, no traceable measurement has been possible to date. Therefore, an extrapolation method deploying measurement data from partial ranges is to be developed. Both partial and full range measurements up to 20 kN m are performed to gather data for implementing an extrapolation approach. The extrapolated data is evaluated, and the results are compared to the full range results.",

author = "P. Weidinger and G. Foyer and Jussi Ala-Hiiro and C. Schlegel and R. Kumme",

note = "Funding Information: Acknowledgements Many thanks are given to Kari Kyll{\"o}nen and Dietmar Mauersberger for performing the measurements. All authors would like to acknowledge the funding of the Joint Research Project `14IND14 MN·m Torque', which has received funding from the EMPIR programme. Funding Information: The lead author gratefully acknowledges the support of the Braunschweig International Graduate School of Metrology B-IGSM. Publisher Copyright: {\textcopyright} 2018 Web Portal IOP. All rights reserved. Copyright: Copyright 2019 Elsevier B.V., All rights reserved.; 22nd World Congress of the International Measurement Confederation, IMEKO 2018 ; Conference date: 03-09-2018 Through 06-09-2018",

year = "2018",

doi = "10.1088/1742-6596/1065/4/042057",

language = "English",

volume = "1065",

journal = "Journal of Physics: Conference Series",

issn = "1742-6588",

publisher = "Institute of Physics IOP",

number = "4",

}

TY - JOUR

T1 - Investigations towards extrapolation approaches for torque transducer characteristics

AU - Weidinger, P.

AU - Foyer, G.

AU - Ala-Hiiro, Jussi

AU - Schlegel, C.

AU - Kumme, R.

N1 - Funding Information: Acknowledgements Many thanks are given to Kari Kyllönen and Dietmar Mauersberger for performing the measurements. All authors would like to acknowledge the funding of the Joint Research Project `14IND14 MN·m Torque', which has received funding from the EMPIR programme. Funding Information: The lead author gratefully acknowledges the support of the Braunschweig International Graduate School of Metrology B-IGSM. Publisher Copyright: © 2018 Web Portal IOP. All rights reserved. Copyright: Copyright 2019 Elsevier B.V., All rights reserved.

PY - 2018

Y1 - 2018

N2 - For torque transducers above 1.1 MNm, no traceable measurement has been possible to date. Therefore, an extrapolation method deploying measurement data from partial ranges is to be developed. Both partial and full range measurements up to 20 kN m are performed to gather data for implementing an extrapolation approach. The extrapolated data is evaluated, and the results are compared to the full range results.

AB - For torque transducers above 1.1 MNm, no traceable measurement has been possible to date. Therefore, an extrapolation method deploying measurement data from partial ranges is to be developed. Both partial and full range measurements up to 20 kN m are performed to gather data for implementing an extrapolation approach. The extrapolated data is evaluated, and the results are compared to the full range results.

UR - http://www.scopus.com/inward/record.url?scp=85057505974&partnerID=8YFLogxK

U2 - 10.1088/1742-6596/1065/4/042057

DO - 10.1088/1742-6596/1065/4/042057

M3 - Article

AN - SCOPUS:85057505974

SN - 1742-6588

VL - 1065

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

IS - 4

M1 - 042057

T2 - 22nd World Congress of the International Measurement Confederation, IMEKO 2018

Y2 - 3 September 2018 through 6 September 2018

ER -

Investigations towards extrapolation approaches for torque transducer characteristics

Abstract

Access to Document

Other files and links

Fingerprint

MNm Torque: Torque measurement in the MN m range

Cite this

Investigations towards extrapolation approaches for torque transducer characteristics

Abstract

Access to Document

Other files and links

Fingerprint

Projects

MNm Torque: Torque measurement in the MN m range

Cite this