Laboratory testing of an active magnetic bearing supported permanent magnet 3.5 kW blower prototype

Rafal P. Jastrzebski; Alexander Smirnov; Janne Nerg; Ahti Jaatinen-Varri; Pekko Jaatinen; Tuomo Lindh; Olli Pyrhonen; Jussi Sopanen; Jari Backman

doi:10.1109/EPE.2013.6631782

Laboratory testing of an active magnetic bearing supported permanent magnet 3.5 kW blower prototype

Rafal P. Jastrzebski, Alexander Smirnov, Janne Nerg, Ahti Jaatinen-Varri, Pekko Jaatinen, Tuomo Lindh, Olli Pyrhonen, Jussi Sopanen, Jari Backman

Not published at VTT

Lappeenranta-Lahti University of Technology LUT

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

5 Citations (Scopus)

Abstract

A commissioning and laboratory tests of an active magnetic bearing supported PM 3kW blower are presented. The motor operation is evaluated in no-load and load tests. An identification of AMB-rotor system, testing of H _∞ centralized control and mass-flow of the blower for recirculation of anode gas in a SOFC are discussed. The key results include comparison between analytical and measured values of an output sensitivity function of different MIMO controllers, measured efficiency and output motor power, and blower measurements.

Original language	English
Title of host publication	2013 15th European Conference on Power Electronics and Applications, EPE 2013
DOIs	https://doi.org/10.1109/EPE.2013.6631782
Publication status	Published - 17 Dec 2013
MoE publication type	A4 Article in a conference publication
Event	15th European Conference on Power Electronics and Applications, EPE 2013 - Lille, France Duration: 2 Sept 2013 → 6 Sept 2013

Conference

Conference	15th European Conference on Power Electronics and Applications, EPE 2013
Country/Territory	France
City	Lille
Period	2/09/13 → 6/09/13

Keywords

Alternative energy
Control methods for electrical systems
Fuel cell system
Magnetic bearings
Magnetic levitation
MIMO control
Prototype commissioning

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/EPE.2013.6631782

Cite this

Jastrzebski, R. P., Smirnov, A., Nerg, J., Jaatinen-Varri, A., Jaatinen, P., Lindh, T., Pyrhonen, O., Sopanen, J., & Backman, J. (2013). Laboratory testing of an active magnetic bearing supported permanent magnet 3.5 kW blower prototype. In 2013 15th European Conference on Power Electronics and Applications, EPE 2013 Article 6631782 https://doi.org/10.1109/EPE.2013.6631782

@inproceedings{48b94a2d28ef4913851bec5cee158435,

title = "Laboratory testing of an active magnetic bearing supported permanent magnet 3.5 kW blower prototype",

abstract = "A commissioning and laboratory tests of an active magnetic bearing supported PM 3kW blower are presented. The motor operation is evaluated in no-load and load tests. An identification of AMB-rotor system, testing of H ∞ centralized control and mass-flow of the blower for recirculation of anode gas in a SOFC are discussed. The key results include comparison between analytical and measured values of an output sensitivity function of different MIMO controllers, measured efficiency and output motor power, and blower measurements.",

keywords = "Alternative energy, Control methods for electrical systems, Fuel cell system, Magnetic bearings, Magnetic levitation, MIMO control, Prototype commissioning",

author = "Jastrzebski, {Rafal P.} and Alexander Smirnov and Janne Nerg and Ahti Jaatinen-Varri and Pekko Jaatinen and Tuomo Lindh and Olli Pyrhonen and Jussi Sopanen and Jari Backman",

year = "2013",

month = dec,

day = "17",

doi = "10.1109/EPE.2013.6631782",

language = "English",

isbn = "978-1-4799-0116-6",

booktitle = "2013 15th European Conference on Power Electronics and Applications, EPE 2013",

note = "15th European Conference on Power Electronics and Applications, EPE 2013 ; Conference date: 02-09-2013 Through 06-09-2013",

}

Jastrzebski, RP, Smirnov, A, Nerg, J, Jaatinen-Varri, A, Jaatinen, P, Lindh, T, Pyrhonen, O, Sopanen, J & Backman, J 2013, Laboratory testing of an active magnetic bearing supported permanent magnet 3.5 kW blower prototype. in 2013 15th European Conference on Power Electronics and Applications, EPE 2013., 6631782, 15th European Conference on Power Electronics and Applications, EPE 2013, Lille, France, 2/09/13. https://doi.org/10.1109/EPE.2013.6631782

Laboratory testing of an active magnetic bearing supported permanent magnet 3.5 kW blower prototype. / Jastrzebski, Rafal P.; Smirnov, Alexander; Nerg, Janne et al.
2013 15th European Conference on Power Electronics and Applications, EPE 2013. 2013. 6631782.

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Laboratory testing of an active magnetic bearing supported permanent magnet 3.5 kW blower prototype

AU - Jastrzebski, Rafal P.

AU - Smirnov, Alexander

AU - Nerg, Janne

AU - Jaatinen-Varri, Ahti

AU - Jaatinen, Pekko

AU - Lindh, Tuomo

AU - Pyrhonen, Olli

AU - Sopanen, Jussi

AU - Backman, Jari

PY - 2013/12/17

Y1 - 2013/12/17

N2 - A commissioning and laboratory tests of an active magnetic bearing supported PM 3kW blower are presented. The motor operation is evaluated in no-load and load tests. An identification of AMB-rotor system, testing of H ∞ centralized control and mass-flow of the blower for recirculation of anode gas in a SOFC are discussed. The key results include comparison between analytical and measured values of an output sensitivity function of different MIMO controllers, measured efficiency and output motor power, and blower measurements.

AB - A commissioning and laboratory tests of an active magnetic bearing supported PM 3kW blower are presented. The motor operation is evaluated in no-load and load tests. An identification of AMB-rotor system, testing of H ∞ centralized control and mass-flow of the blower for recirculation of anode gas in a SOFC are discussed. The key results include comparison between analytical and measured values of an output sensitivity function of different MIMO controllers, measured efficiency and output motor power, and blower measurements.

KW - Alternative energy

KW - Control methods for electrical systems

KW - Fuel cell system

KW - Magnetic bearings

KW - Magnetic levitation

KW - MIMO control

KW - Prototype commissioning

UR - http://www.scopus.com/inward/record.url?scp=84890197281&partnerID=8YFLogxK

U2 - 10.1109/EPE.2013.6631782

DO - 10.1109/EPE.2013.6631782

M3 - Conference article in proceedings

AN - SCOPUS:84890197281

SN - 978-1-4799-0116-6

BT - 2013 15th European Conference on Power Electronics and Applications, EPE 2013

T2 - 15th European Conference on Power Electronics and Applications, EPE 2013

Y2 - 2 September 2013 through 6 September 2013

ER -

Laboratory testing of an active magnetic bearing supported permanent magnet 3.5 kW blower prototype

Abstract

Conference

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this