Material challenges in the manufacturing of tailored structures with direct write technologies

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Abstract

Two different direct write technologies, Direct Write Paste (DWP) and Direct Write Thermal Spray (DWTS), and the general material challenges related to these technologies are described in this paper. These new technologies open new routes to produce highly functional products that can be tailored and customised according to the demands of the applications. The DWP process is based on dispensing paste-like materials through a tip onto a substrate. Depending on the paste material, either 2 or 3 dimensional structures can be printed. The DWTS technique is based on thermal spraying, which is a spray process where the powder material is accelerated in molten form and impinged onto a surface. Products made using DWTS are especially targeted at harsh environment solutions. Results related to development of printable materials and printed products are presented.
Original languageEnglish
Title of host publicationMaterials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate
PublisherSpringer
Pages57-66
ISBN (Electronic)978-3-319-11340-1
ISBN (Print)978-3-319-11339-5
DOIs
Publication statusPublished - 2012
MoE publication typeA4 Article in a conference publication
Event4th WMRIF Workshop for Young Scientists - Pathum Thani, Thailand
Duration: 28 Aug 201231 Aug 2012

Workshop

Workshop4th WMRIF Workshop for Young Scientists
CountryThailand
CityPathum Thani
Period28/08/1231/08/12

Fingerprint

Thermal spraying
Molten materials
Powders
Substrates
Hot Temperature

Cite this

Metsä-Kortelainen, S., Ronkainen, H., Varis, T., Ruusuvuori, K., Roozeman, R., Vehmas, T., ... Suhonen, T. (2012). Material challenges in the manufacturing of tailored structures with direct write technologies. In Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate (pp. 57-66). Springer. https://doi.org/10.1007/978-3-319-11340-1_6
Metsä-Kortelainen, Sini ; Ronkainen, Helena ; Varis, Tommi ; Ruusuvuori, Kimmo ; Roozeman, Robert ; Vehmas, Tapio ; Kupiainen, Virpi ; Ahlroos, Tiina ; Lagerbom, Juha ; Suhonen, Tomi. / Material challenges in the manufacturing of tailored structures with direct write technologies. Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate. Springer, 2012. pp. 57-66
@inproceedings{ab3f98a228cc467ebd8440805901bf9b,
title = "Material challenges in the manufacturing of tailored structures with direct write technologies",
abstract = "Two different direct write technologies, Direct Write Paste (DWP) and Direct Write Thermal Spray (DWTS), and the general material challenges related to these technologies are described in this paper. These new technologies open new routes to produce highly functional products that can be tailored and customised according to the demands of the applications. The DWP process is based on dispensing paste-like materials through a tip onto a substrate. Depending on the paste material, either 2 or 3 dimensional structures can be printed. The DWTS technique is based on thermal spraying, which is a spray process where the powder material is accelerated in molten form and impinged onto a surface. Products made using DWTS are especially targeted at harsh environment solutions. Results related to development of printable materials and printed products are presented.",
author = "Sini Mets{\"a}-Kortelainen and Helena Ronkainen and Tommi Varis and Kimmo Ruusuvuori and Robert Roozeman and Tapio Vehmas and Virpi Kupiainen and Tiina Ahlroos and Juha Lagerbom and Tomi Suhonen",
year = "2012",
doi = "10.1007/978-3-319-11340-1_6",
language = "English",
isbn = "978-3-319-11339-5",
pages = "57--66",
booktitle = "Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate",
publisher = "Springer",
address = "Germany",

}

Metsä-Kortelainen, S, Ronkainen, H, Varis, T, Ruusuvuori, K, Roozeman, R, Vehmas, T, Kupiainen, V, Ahlroos, T, Lagerbom, J & Suhonen, T 2012, Material challenges in the manufacturing of tailored structures with direct write technologies. in Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate. Springer, pp. 57-66, 4th WMRIF Workshop for Young Scientists, Pathum Thani, Thailand, 28/08/12. https://doi.org/10.1007/978-3-319-11340-1_6

Material challenges in the manufacturing of tailored structures with direct write technologies. / Metsä-Kortelainen, Sini; Ronkainen, Helena; Varis, Tommi; Ruusuvuori, Kimmo; Roozeman, Robert; Vehmas, Tapio; Kupiainen, Virpi; Ahlroos, Tiina; Lagerbom, Juha; Suhonen, Tomi.

Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate. Springer, 2012. p. 57-66.

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

TY - GEN

T1 - Material challenges in the manufacturing of tailored structures with direct write technologies

AU - Metsä-Kortelainen, Sini

AU - Ronkainen, Helena

AU - Varis, Tommi

AU - Ruusuvuori, Kimmo

AU - Roozeman, Robert

AU - Vehmas, Tapio

AU - Kupiainen, Virpi

AU - Ahlroos, Tiina

AU - Lagerbom, Juha

AU - Suhonen, Tomi

PY - 2012

Y1 - 2012

N2 - Two different direct write technologies, Direct Write Paste (DWP) and Direct Write Thermal Spray (DWTS), and the general material challenges related to these technologies are described in this paper. These new technologies open new routes to produce highly functional products that can be tailored and customised according to the demands of the applications. The DWP process is based on dispensing paste-like materials through a tip onto a substrate. Depending on the paste material, either 2 or 3 dimensional structures can be printed. The DWTS technique is based on thermal spraying, which is a spray process where the powder material is accelerated in molten form and impinged onto a surface. Products made using DWTS are especially targeted at harsh environment solutions. Results related to development of printable materials and printed products are presented.

AB - Two different direct write technologies, Direct Write Paste (DWP) and Direct Write Thermal Spray (DWTS), and the general material challenges related to these technologies are described in this paper. These new technologies open new routes to produce highly functional products that can be tailored and customised according to the demands of the applications. The DWP process is based on dispensing paste-like materials through a tip onto a substrate. Depending on the paste material, either 2 or 3 dimensional structures can be printed. The DWTS technique is based on thermal spraying, which is a spray process where the powder material is accelerated in molten form and impinged onto a surface. Products made using DWTS are especially targeted at harsh environment solutions. Results related to development of printable materials and printed products are presented.

U2 - 10.1007/978-3-319-11340-1_6

DO - 10.1007/978-3-319-11340-1_6

M3 - Conference article in proceedings

SN - 978-3-319-11339-5

SP - 57

EP - 66

BT - Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate

PB - Springer

ER -

Metsä-Kortelainen S, Ronkainen H, Varis T, Ruusuvuori K, Roozeman R, Vehmas T et al. Material challenges in the manufacturing of tailored structures with direct write technologies. In Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate. Springer. 2012. p. 57-66 https://doi.org/10.1007/978-3-319-11340-1_6