Mechanical behavior of heat-treated spruce (Picea abies) wood at constant moisture content and ambient humidity

The mechanical behavior of heat-treated spruce wood was investigated in relation to the mass loss that occurs during thermal treatment. At constant wood moisture content, the strength, failure strain and toughness of wood were reduced by the heat-bath treatment, decreasing with increasing mass loss. The stiffness was unaffected up to a mass loss of about 3%, and thereafter it decreased. The mechanical properties, however, are not only dependent on the mass loss but also on the relative humidity in the heating atmosphere. As a function of mass loss, the inelastic ductility and the inelastic toughness were the lowest when wood was heated in a dry climate, as compared to a moist climate.

On the other hand, the mechanical properties of heat-treated wood were tested at constant ambient humidity. In such circumstances, the failure strain and the toughness were still reduced, but the strength and the stiffness were actually improved up to a mass loss of about 2%–3%. The improvement is due to the lower equilibrium moisture content of heat-treated wood when placed in service conditions. As a function of mass loss, wood heated at intermediate relative humidity (in the vicinity of 50%) exhibited the best mechanical behavior, which surprisingly included inelastic ductility. This is believed to be due to some irreversible hydrogen bonding.