Optimisation of in-service performance of boiler steels by modelling high temperature corrosion: EU FP5 OPTICORR project

Liisa Heikinheimo; Klaus Hack; David Baxter; Michael Spiegel; Ulrich Krupp; Marko Hämäläinen; Mikko Arponen

doi:10.4028/www.scientific.net/MSF.461-464.473

Optimisation of in-service performance of boiler steels by modelling high temperature corrosion: EU FP5 OPTICORR project

Liisa Heikinheimo
, Klaus Hack
, David Baxter
, Michael Spiegel
, Ulrich Krupp
, Marko Hämäläinen
, Mikko Arponen

VTT Technical Research Centre of Finland

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

6 Citations (Scopus)

Original language	English
Title of host publication	6th International Symposium on High Temperature Corrosion and Protection of Materials
Editors	Pierre Steinmetz, Ian Wright
Publisher	Trans Tech Publications
Pages	473-480
DOIs	https://doi.org/10.4028/www.scientific.net/MSF.461-464.473
Publication status	Published - 2004
MoE publication type	A4 Article in a conference publication
Event	6th International Symposium on High Temperature Corrosion and Protection of Materials - Île des Embiez, France Duration: 16 May 2004 → 21 May 2004

Publication series

Series	Materials Science Forum
Volume	461-464
ISSN	0255-5476

Conference

Conference	6th International Symposium on High Temperature Corrosion and Protection of Materials
Country/Territory	France
City	Île des Embiez
Period	16/05/04 → 21/05/04

Keywords

boiler steels
high temperature corrosion
kinetics
modelling

Access to Document

10.4028/www.scientific.net/MSF.461-464.473

Cite this

Heikinheimo, L., Hack, K., Baxter, D., Spiegel, M., Krupp, U., Hämäläinen, M., & Arponen, M. (2004). Optimisation of in-service performance of boiler steels by modelling high temperature corrosion: EU FP5 OPTICORR project. In P. Steinmetz, & I. Wright (Eds.), 6th International Symposium on High Temperature Corrosion and Protection of Materials (pp. 473-480). Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/MSF.461-464.473

Heikinheimo, Liisa ; Hack, Klaus ; Baxter, David et al. / Optimisation of in-service performance of boiler steels by modelling high temperature corrosion : EU FP5 OPTICORR project. 6th International Symposium on High Temperature Corrosion and Protection of Materials. editor / Pierre Steinmetz ; Ian Wright. Trans Tech Publications, 2004. pp. 473-480 (Materials Science Forum, Vol. 461-464).

@inproceedings{ded12eda81454f11bde6dcb091480595,

title = "Optimisation of in-service performance of boiler steels by modelling high temperature corrosion: EU FP5 OPTICORR project",

keywords = "boiler steels, high temperature corrosion, kinetics, modelling",

author = "Liisa Heikinheimo and Klaus Hack and David Baxter and Michael Spiegel and Ulrich Krupp and Marko H{\"a}m{\"a}l{\"a}inen and Mikko Arponen",

year = "2004",

doi = "10.4028/www.scientific.net/MSF.461-464.473",

language = "English",

series = "Materials Science Forum",

publisher = "Trans Tech Publications",

pages = "473--480",

editor = "Pierre Steinmetz and Ian Wright",

booktitle = "6th International Symposium on High Temperature Corrosion and Protection of Materials",

address = "Switzerland",

note = "6th International Symposium on High Temperature Corrosion and Protection of Materials ; Conference date: 16-05-2004 Through 21-05-2004",

}

Heikinheimo, L, Hack, K, Baxter, D, Spiegel, M, Krupp, U, Hämäläinen, M & Arponen, M 2004, Optimisation of in-service performance of boiler steels by modelling high temperature corrosion: EU FP5 OPTICORR project. in P Steinmetz & I Wright (eds), 6th International Symposium on High Temperature Corrosion and Protection of Materials. Trans Tech Publications, Materials Science Forum, vol. 461-464, pp. 473-480, 6th International Symposium on High Temperature Corrosion and Protection of Materials, Île des Embiez, France, 16/05/04. https://doi.org/10.4028/www.scientific.net/MSF.461-464.473

Optimisation of in-service performance of boiler steels by modelling high temperature corrosion: EU FP5 OPTICORR project. / Heikinheimo, Liisa; Hack, Klaus; Baxter, David et al.
6th International Symposium on High Temperature Corrosion and Protection of Materials. ed. / Pierre Steinmetz; Ian Wright. Trans Tech Publications, 2004. p. 473-480 (Materials Science Forum, Vol. 461-464).

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Optimisation of in-service performance of boiler steels by modelling high temperature corrosion

T2 - 6th International Symposium on High Temperature Corrosion and Protection of Materials

AU - Heikinheimo, Liisa

AU - Hack, Klaus

AU - Baxter, David

AU - Spiegel, Michael

AU - Krupp, Ulrich

AU - Hämäläinen, Marko

AU - Arponen, Mikko

PY - 2004

Y1 - 2004

KW - boiler steels

KW - high temperature corrosion

KW - kinetics

KW - modelling

U2 - 10.4028/www.scientific.net/MSF.461-464.473

DO - 10.4028/www.scientific.net/MSF.461-464.473

M3 - Conference article in proceedings

T3 - Materials Science Forum

SP - 473

EP - 480

BT - 6th International Symposium on High Temperature Corrosion and Protection of Materials

A2 - Steinmetz, Pierre

A2 - Wright, Ian

PB - Trans Tech Publications

Y2 - 16 May 2004 through 21 May 2004

ER -

Heikinheimo L, Hack K, Baxter D, Spiegel M, Krupp U, Hämäläinen M et al. Optimisation of in-service performance of boiler steels by modelling high temperature corrosion: EU FP5 OPTICORR project. In Steinmetz P, Wright I, editors, 6th International Symposium on High Temperature Corrosion and Protection of Materials. Trans Tech Publications. 2004. p. 473-480. (Materials Science Forum, Vol. 461-464). doi: 10.4028/www.scientific.net/MSF.461-464.473