Skip to main navigation Skip to search Skip to main content

Picosecond laser processing - Material removal rates of metals

  • Raimo Penttilä
  • , Henrikki Pantsar
  • , Petri Laakso

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

Abstract

A picosecond laser has been used to establish the material removal rate of metals. Varied processing parameters include laser power, pulse frequency and scanning velocity. The laser beam was manipulated using a galvanometric scan head with a 100 mm focusing optic. Maximum power of the laser in the IR was 2 W and 700 mW in the UV. Scanning velocities were varied between 100 to 800 mm/s. Materials for the experiments were copper, aluminium and stainless steel. Results reveal that for each metal an optimal pulse energy range can be found in which the material removal rate reaches it's maximum at a given laser power. The scanning velocity did not have a great influence on the material removal rate, but more on the quality of the ablated surface. Highly reflecting materials showed an increase of ablation rate when using UV. In stainless steel use of UV beam did not show any advantages by means of process efficiency.
Original languageEnglish
Title of host publication11th NOLAMP Conference in Laser Processing of Materials
EditorsVeli Kujanpää, Antti Salminen
Place of PublicationLappeenranta
PublisherLappeenranta University of Technology
Pages502-512
ISBN (Electronic)978-952-214-412-6
Publication statusPublished - 2007
MoE publication typeB3 Non-refereed article in conference proceedings
Event11th NOLAMP Conference in Laser Processing of Materials, NOLAMP - Lappeenranta, Finland
Duration: 20 Aug 2007 → 22 Aug 2007

Conference

Conference11th NOLAMP Conference in Laser Processing of Materials, NOLAMP
Country/TerritoryFinland
CityLappeenranta
Period20/08/07 → 22/08/07

Keywords

  • micro processing
  • ablation
  • picosecond laser
  • material removal rate
  • metals

Fingerprint

Dive into the research topics of 'Picosecond laser processing - Material removal rates of metals'. Together they form a unique fingerprint.

Cite this