Piezoelectric properties of roll-to-roll fabricated polylactic acid films

Sampo Tuukkanen; Juuso Toriseva; Arno Pammo; Juhani Virtanen; Johanna Lahti

doi:10.1109/ESTC48849.2020.9229788

Piezoelectric properties of roll-to-roll fabricated polylactic acid films

Sampo Tuukkanen, Juuso Toriseva, Arno Pammo, Juhani Virtanen, Johanna Lahti

Not published at VTT

Tampere University

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Abstract

In this work, we report functionality of polylactide acid (PLA) as piezoelectric degradable material, which has given in the preliminary studies the piezoelectric sensitivities are on the range of 10 pC/N, depending on PLA film details. However, this is very promisingly close to commercial alternatives, such as fluoropolymer polyvinylidene fluoride (PVDF), which is expensive fluoropolymer, not biodegradable or recyclable. Further, we have demonstrated the manufacturing of PLA films in roll-to-roll pilot line, which gives the promise that this type of sensors could act as elements in the future trillion sensors vision, where the large number of individual sensors are required.

Original language	English
Title of host publication	Proceedings - 2020 IEEE 8th Electronics System-Integration Technology Conference, ESTC 2020
Publisher	IEEE Institute of Electrical and Electronic Engineers
ISBN (Electronic)	978-1-72816-292-8
DOIs	https://doi.org/10.1109/ESTC48849.2020.9229788
Publication status	Published - 15 Sept 2020
MoE publication type	A4 Article in a conference publication
Event	8th IEEE Electronics System-Integration Technology Conference, ESTC 2020 - Tonsberg, Vestfold, Norway Duration: 15 Sept 2020 → 18 Sept 2020

Conference

Conference	8th IEEE Electronics System-Integration Technology Conference, ESTC 2020
Country/Territory	Norway
City	Tonsberg, Vestfold
Period	15/09/20 → 18/09/20

Keywords

Piezoelectric sensor material
Polylactic acid
Roll-to-roll film coating

Access to Document

10.1109/ESTC48849.2020.9229788

Cite this

@inproceedings{41c9f337d74a4e65befb0a1853373bc6,

title = "Piezoelectric properties of roll-to-roll fabricated polylactic acid films",

abstract = "In this work, we report functionality of polylactide acid (PLA) as piezoelectric degradable material, which has given in the preliminary studies the piezoelectric sensitivities are on the range of 10 pC/N, depending on PLA film details. However, this is very promisingly close to commercial alternatives, such as fluoropolymer polyvinylidene fluoride (PVDF), which is expensive fluoropolymer, not biodegradable or recyclable. Further, we have demonstrated the manufacturing of PLA films in roll-to-roll pilot line, which gives the promise that this type of sensors could act as elements in the future trillion sensors vision, where the large number of individual sensors are required.",

keywords = "Piezoelectric sensor material, Polylactic acid, Roll-to-roll film coating",

author = "Sampo Tuukkanen and Juuso Toriseva and Arno Pammo and Juhani Virtanen and Johanna Lahti",

note = "Funding Information: Ratkaisut - Yhteisty{\"o}alusta kiertotalouden alueellisena vahvistajana (engl. Bio-based intelligent solutions – Collaboration network as regional strengthening of circular economy), funded by Council of Tampere Region. Publisher Copyright: {\textcopyright} 2020 IEEE.; 8th IEEE Electronics System-Integration Technology Conference, ESTC 2020 ; Conference date: 15-09-2020 Through 18-09-2020",

year = "2020",

month = sep,

day = "15",

doi = "10.1109/ESTC48849.2020.9229788",

language = "English",

booktitle = "Proceedings - 2020 IEEE 8th Electronics System-Integration Technology Conference, ESTC 2020",

publisher = "IEEE Institute of Electrical and Electronic Engineers",

address = "United States",

}

Tuukkanen, S, Toriseva, J, Pammo, A, Virtanen, J & Lahti, J 2020, Piezoelectric properties of roll-to-roll fabricated polylactic acid films. in Proceedings - 2020 IEEE 8th Electronics System-Integration Technology Conference, ESTC 2020., 9229788, IEEE Institute of Electrical and Electronic Engineers, 8th IEEE Electronics System-Integration Technology Conference, ESTC 2020, Tonsberg, Vestfold, Norway, 15/09/20. https://doi.org/10.1109/ESTC48849.2020.9229788

Piezoelectric properties of roll-to-roll fabricated polylactic acid films. / Tuukkanen, Sampo; Toriseva, Juuso; Pammo, Arno et al.
Proceedings - 2020 IEEE 8th Electronics System-Integration Technology Conference, ESTC 2020. IEEE Institute of Electrical and Electronic Engineers, 2020. 9229788.

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Piezoelectric properties of roll-to-roll fabricated polylactic acid films

AU - Tuukkanen, Sampo

AU - Toriseva, Juuso

AU - Pammo, Arno

AU - Virtanen, Juhani

AU - Lahti, Johanna

N1 - Funding Information: Ratkaisut - Yhteistyöalusta kiertotalouden alueellisena vahvistajana (engl. Bio-based intelligent solutions – Collaboration network as regional strengthening of circular economy), funded by Council of Tampere Region. Publisher Copyright: © 2020 IEEE.

PY - 2020/9/15

Y1 - 2020/9/15

N2 - In this work, we report functionality of polylactide acid (PLA) as piezoelectric degradable material, which has given in the preliminary studies the piezoelectric sensitivities are on the range of 10 pC/N, depending on PLA film details. However, this is very promisingly close to commercial alternatives, such as fluoropolymer polyvinylidene fluoride (PVDF), which is expensive fluoropolymer, not biodegradable or recyclable. Further, we have demonstrated the manufacturing of PLA films in roll-to-roll pilot line, which gives the promise that this type of sensors could act as elements in the future trillion sensors vision, where the large number of individual sensors are required.

AB - In this work, we report functionality of polylactide acid (PLA) as piezoelectric degradable material, which has given in the preliminary studies the piezoelectric sensitivities are on the range of 10 pC/N, depending on PLA film details. However, this is very promisingly close to commercial alternatives, such as fluoropolymer polyvinylidene fluoride (PVDF), which is expensive fluoropolymer, not biodegradable or recyclable. Further, we have demonstrated the manufacturing of PLA films in roll-to-roll pilot line, which gives the promise that this type of sensors could act as elements in the future trillion sensors vision, where the large number of individual sensors are required.

KW - Piezoelectric sensor material

KW - Polylactic acid

KW - Roll-to-roll film coating

UR - http://www.scopus.com/inward/record.url?scp=85096573973&partnerID=8YFLogxK

U2 - 10.1109/ESTC48849.2020.9229788

DO - 10.1109/ESTC48849.2020.9229788

M3 - Conference article in proceedings

AN - SCOPUS:85096573973

BT - Proceedings - 2020 IEEE 8th Electronics System-Integration Technology Conference, ESTC 2020

PB - IEEE Institute of Electrical and Electronic Engineers

T2 - 8th IEEE Electronics System-Integration Technology Conference, ESTC 2020

Y2 - 15 September 2020 through 18 September 2020

ER -

Piezoelectric properties of roll-to-roll fabricated polylactic acid films

Abstract

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this