Pilot production of photonic devices by roll-to-roll nanoimprinting

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Abstract

Waveguides for back lighting have been produced using roll-to-roll nanoimprinting. More than 1000 pieces were fabricated and every 50th device was analysed by confocal microscope, atomic force microscopy and luminance measurements. The properties of the devices are of commercial quality, confirming that roll-to-roll nanoimprinting has potential for high throughput production.
Original languageEnglish
Pages (from-to)227-228
Number of pages1
JournalJournal of Photopolymer Science and Technology
Volume25
Issue number2
DOIs
Publication statusPublished - 2012
MoE publication typeA1 Journal article-refereed

Fingerprint

Photonic devices
Luminance
Atomic force microscopy
Waveguides
Microscopes
Lighting
Throughput

Keywords

  • Backlight device
  • diffractive element
  • nanoprint
  • roll to roll

Cite this

@article{08026a79d40e431ca69dc78e9c7d5a0c,
title = "Pilot production of photonic devices by roll-to-roll nanoimprinting",
abstract = "Waveguides for back lighting have been produced using roll-to-roll nanoimprinting. More than 1000 pieces were fabricated and every 50th device was analysed by confocal microscope, atomic force microscopy and luminance measurements. The properties of the devices are of commercial quality, confirming that roll-to-roll nanoimprinting has potential for high throughput production.",
keywords = "Backlight device, diffractive element, nanoprint, roll to roll",
author = "Tapio M{\"a}kel{\"a} and Tomi Haatainen and Jouni Ahopelto",
year = "2012",
doi = "10.2494/photopolymer.25.227",
language = "English",
volume = "25",
pages = "227--228",
journal = "Journal of Photopolymer Science and Technology",
issn = "0914-9244",
publisher = "Tokai University",
number = "2",

}

Pilot production of photonic devices by roll-to-roll nanoimprinting. / Mäkelä, Tapio; Haatainen, Tomi; Ahopelto, Jouni.

In: Journal of Photopolymer Science and Technology, Vol. 25, No. 2, 2012, p. 227-228.

Research output: Contribution to journalArticleScientificpeer-review

TY - JOUR

T1 - Pilot production of photonic devices by roll-to-roll nanoimprinting

AU - Mäkelä, Tapio

AU - Haatainen, Tomi

AU - Ahopelto, Jouni

PY - 2012

Y1 - 2012

N2 - Waveguides for back lighting have been produced using roll-to-roll nanoimprinting. More than 1000 pieces were fabricated and every 50th device was analysed by confocal microscope, atomic force microscopy and luminance measurements. The properties of the devices are of commercial quality, confirming that roll-to-roll nanoimprinting has potential for high throughput production.

AB - Waveguides for back lighting have been produced using roll-to-roll nanoimprinting. More than 1000 pieces were fabricated and every 50th device was analysed by confocal microscope, atomic force microscopy and luminance measurements. The properties of the devices are of commercial quality, confirming that roll-to-roll nanoimprinting has potential for high throughput production.

KW - Backlight device

KW - diffractive element

KW - nanoprint

KW - roll to roll

U2 - 10.2494/photopolymer.25.227

DO - 10.2494/photopolymer.25.227

M3 - Article

VL - 25

SP - 227

EP - 228

JO - Journal of Photopolymer Science and Technology

JF - Journal of Photopolymer Science and Technology

SN - 0914-9244

IS - 2

ER -