Preliminary evaluation of fly ash and lime for use as supplementary cementing materials in cold-agglomerated blast furnace briquetting

Mikko Mäkelä, Timo Paananen, Tommi Kokkonen, Hannu Makkonen, Jyrki Heino, Olli Dahl

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

Abstract

The utilization of biomass fly ash and lime was investigated as cement replacements in blast furnace briquetting. Sample characterization included chemical (XRF) and mineralogical (XRD) analysis, particle size determination, and thermal behaviour (TGA/DSC-TGA). Additionally, the mechanical performance and fly ash, lime, and fly ash/lime mixtures as cement replacements were determined by incorporation in mortars tested by standardized methods (EN 196-1). Based on the results, detrimental alkali, sulphur, and chlorine contents of the biomass fly ashes do not seem to restrict use in briquetting. However, the utilization of fly ashes as cement replacements resulted in significant decline of 28 day compression strength values. The two different fly ash samples attested to 28 day compression strength of app. 72% and 55% of the respective control. Inferior mechanical performance was related to moisture absorption according to XRD and DSC-TGA and relatively larger particle size. Respectively, lime additions encouraged fly ash strength development only in the case of inferior fly ash performance related to the aforementioned effects. The results provide important information for the forth-coming manufacture of blast furnace test briquettes, which is to commence in the near future.

Original languageEnglish
Pages (from-to)776-781
Number of pages6
JournalISIJ International
Volume51
Issue number5
DOIs
Publication statusPublished - 13 May 2011
MoE publication typeA1 Journal article-refereed

Keywords

  • Blast furnace
  • Briquetting
  • Cement replacement
  • Fly ash
  • Mortar

Fingerprint

Dive into the research topics of 'Preliminary evaluation of fly ash and lime for use as supplementary cementing materials in cold-agglomerated blast furnace briquetting'. Together they form a unique fingerprint.

Cite this