Preparation of the VTT’s 1.1 MN hydraulic amplification machine for the modernization of the control system

Jussi Ala-Hiiro, Jani Korhonen, Päivi Koponen (Corresponding author)

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Abstract

This paper describes the preparation methods off VTT’s 1.1 MN force standard machine (FSM) before modernization of its control system. Working principle of the machine is introduced. A customized datalogger to investigate the FSM functionality and dynamic behavior is developed and described. The plan for the investigation of the 1 MN force standard machine’s control system is also introduced.
Original languageEnglish
Title of host publication23rd Conference on the Measurement of Force, Mass and Torque 2017
Subtitle of host publicationMeasurement Facing New Challenges - Held Together with TC5 and TC22
PublisherCurran Associates Inc.
Pages334-337
ISBN (Electronic)978-1-5108-4471-1
Publication statusPublished - 1 Jan 2017
MoE publication typeA4 Article in a conference publication
Event23rd Conference on the Measurement of Force, Mass and Torque, Together with 4th TC22 Conference on Vibration Measurement and 13th TC5 Conference on the Measurement of Hardness - Helsinki, Finland
Duration: 30 May 20171 Jun 2017

Conference

Conference23rd Conference on the Measurement of Force, Mass and Torque, Together with 4th TC22 Conference on Vibration Measurement and 13th TC5 Conference on the Measurement of Hardness
Country/TerritoryFinland
CityHelsinki
Period30/05/171/06/17

Keywords

  • Force standard machine
  • Modernization
  • Preparation

Fingerprint

Dive into the research topics of 'Preparation of the VTT’s 1.1 MN hydraulic amplification machine for the modernization of the control system'. Together they form a unique fingerprint.

Cite this