Prognostics through combining data from electric motor control system with process data

Jarmo Keski-Säntti

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientific

Abstract

Condition monitoring and process control data are typically observed separately. Also certain equipments like electric motors offer several measurements which are not followed at the process control. Within the Prognos-project combining data from electric motor control system with process data is studied by pilot scale tests and by industrial tests. A Labview based tool for data diagnosis is developed. Results of the study show that the motor current measurements can be used for process situation and equipment condition diagnosis and also with historical perspective for prognosis.
Original languageEnglish
Title of host publicationPrognostics for industrial machinery availability
Subtitle of host publicationFinal seminar
Place of PublicationEspoo
PublisherVTT Technical Research Centre of Finland
Pages86-96
ISBN (Electronic)951-38-6310-7
ISBN (Print)951-38-6309-3
Publication statusPublished - 2006
MoE publication typeB3 Non-refereed article in conference proceedings
EventPrognostics for Industrial Machinery Availabitity - Final Seminar - Espoo, Finland
Duration: 12 Dec 200612 Dec 2006

Publication series

SeriesVTT Symposium
Number243
ISSN0357-9387

Conference

ConferencePrognostics for Industrial Machinery Availabitity - Final Seminar
CountryFinland
CityEspoo
Period12/12/0612/12/06

Fingerprint Dive into the research topics of 'Prognostics through combining data from electric motor control system with process data'. Together they form a unique fingerprint.

  • Cite this

    Keski-Säntti, J. (2006). Prognostics through combining data from electric motor control system with process data. In Prognostics for industrial machinery availability: Final seminar (pp. 86-96). VTT Technical Research Centre of Finland. VTT Symposium, No. 243 http://www.vtt.fi/inf/pdf/symposiums/2006/S243.pdf