Quantitative infrared thermography in buildings

Ermanno Grinzato (Corresponding Author), Vladimir Vavilov, Timo Kauppinen

Research output: Contribution to journalArticleScientificpeer-review

134 Citations (Scopus)

Abstract

A methodology, based on the solution of the inverse heat transfer problem, for the detection and evaluation of flaws in buildings is discussed. The temperature varying in space and time is recorded by a thermographic equipment and each point belonging to the inspected area is analysed quantitatively.
Data are processed to give a map of defects of the wall, based on the most suitable local thermal parameter. The thermal-physical aspects of different defects are studied, along with the description of simplified models to interpret surface temperature data.
The building envelope is examined mainly in transient thermal regime. Testing procedures using periodic or pulse heating of the surface are described. The theoretical analysis is used to predict temperature evolution and properly design the test. A detectability comparison among different procedures is performed. Experimental results are reported for insulation deficiencies and thermal bridges evaluation, air leakage detection and moisture content mapping.

Original languageEnglish
Pages (from-to)1-9
JournalEnergy and Buildings
Volume29
Issue number1
DOIs
Publication statusPublished - 1998
MoE publication typeA1 Journal article-refereed

Fingerprint

Defects
Leakage (fluid)
Temperature
Insulation
Moisture
Heat transfer
Heating
Hot Temperature
Testing
Air

Cite this

Grinzato, Ermanno ; Vavilov, Vladimir ; Kauppinen, Timo. / Quantitative infrared thermography in buildings. In: Energy and Buildings. 1998 ; Vol. 29, No. 1. pp. 1-9.
@article{5c566770e88d45f499f4ecba8e7ba787,
title = "Quantitative infrared thermography in buildings",
abstract = "A methodology, based on the solution of the inverse heat transfer problem, for the detection and evaluation of flaws in buildings is discussed. The temperature varying in space and time is recorded by a thermographic equipment and each point belonging to the inspected area is analysed quantitatively. Data are processed to give a map of defects of the wall, based on the most suitable local thermal parameter. The thermal-physical aspects of different defects are studied, along with the description of simplified models to interpret surface temperature data. The building envelope is examined mainly in transient thermal regime. Testing procedures using periodic or pulse heating of the surface are described. The theoretical analysis is used to predict temperature evolution and properly design the test. A detectability comparison among different procedures is performed. Experimental results are reported for insulation deficiencies and thermal bridges evaluation, air leakage detection and moisture content mapping.",
author = "Ermanno Grinzato and Vladimir Vavilov and Timo Kauppinen",
year = "1998",
doi = "10.1016/S0378-7788(97)00039-X",
language = "English",
volume = "29",
pages = "1--9",
journal = "Energy and Buildings",
issn = "0378-7788",
publisher = "Elsevier",
number = "1",

}

Grinzato, E, Vavilov, V & Kauppinen, T 1998, 'Quantitative infrared thermography in buildings', Energy and Buildings, vol. 29, no. 1, pp. 1-9. https://doi.org/10.1016/S0378-7788(97)00039-X

Quantitative infrared thermography in buildings. / Grinzato, Ermanno (Corresponding Author); Vavilov, Vladimir; Kauppinen, Timo.

In: Energy and Buildings, Vol. 29, No. 1, 1998, p. 1-9.

Research output: Contribution to journalArticleScientificpeer-review

TY - JOUR

T1 - Quantitative infrared thermography in buildings

AU - Grinzato, Ermanno

AU - Vavilov, Vladimir

AU - Kauppinen, Timo

PY - 1998

Y1 - 1998

N2 - A methodology, based on the solution of the inverse heat transfer problem, for the detection and evaluation of flaws in buildings is discussed. The temperature varying in space and time is recorded by a thermographic equipment and each point belonging to the inspected area is analysed quantitatively. Data are processed to give a map of defects of the wall, based on the most suitable local thermal parameter. The thermal-physical aspects of different defects are studied, along with the description of simplified models to interpret surface temperature data. The building envelope is examined mainly in transient thermal regime. Testing procedures using periodic or pulse heating of the surface are described. The theoretical analysis is used to predict temperature evolution and properly design the test. A detectability comparison among different procedures is performed. Experimental results are reported for insulation deficiencies and thermal bridges evaluation, air leakage detection and moisture content mapping.

AB - A methodology, based on the solution of the inverse heat transfer problem, for the detection and evaluation of flaws in buildings is discussed. The temperature varying in space and time is recorded by a thermographic equipment and each point belonging to the inspected area is analysed quantitatively. Data are processed to give a map of defects of the wall, based on the most suitable local thermal parameter. The thermal-physical aspects of different defects are studied, along with the description of simplified models to interpret surface temperature data. The building envelope is examined mainly in transient thermal regime. Testing procedures using periodic or pulse heating of the surface are described. The theoretical analysis is used to predict temperature evolution and properly design the test. A detectability comparison among different procedures is performed. Experimental results are reported for insulation deficiencies and thermal bridges evaluation, air leakage detection and moisture content mapping.

U2 - 10.1016/S0378-7788(97)00039-X

DO - 10.1016/S0378-7788(97)00039-X

M3 - Article

VL - 29

SP - 1

EP - 9

JO - Energy and Buildings

JF - Energy and Buildings

SN - 0378-7788

IS - 1

ER -