Size limits of non-split and split ACTFEL-displays

Markku Åberg

    Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

    Abstract

    The most important size limiting parameters of an EL-display are the RC-time constants of the row and column lines, the power consumption arising mainly from the column electrode resistance, and the current capacity of the drivers. In this work the size limits have been analyzed by using circuit simulation methods. With the present standard brightness and resolution, a 1500.1000 20"-25" display was found to be possible with the non-split structure. Still larger sizes can be manufactured by splitting the columns or rows. A display with both columns and rows split can still be made on a single substrate. With this structure over 40 inch diagonal EL-displays can be made.
    Original languageEnglish
    Title of host publicationDisplay Systems
    EditorsChristopher T. Bartlett, Matthew D. Cowan
    Place of PublicationBellingham
    PublisherInternational Society for Optics and Photonics SPIE
    Pages34-43
    ISBN (Print)978-0-8194-1237-9
    DOIs
    Publication statusPublished - 1993
    MoE publication typeA4 Article in a conference publication
    EventEUROPTO Conference about Displays Systems - München, Germany
    Duration: 23 Jun 199324 Jun 1993

    Publication series

    SeriesProceedings of SPIE
    Volume1988
    ISSN0277-786X

    Conference

    ConferenceEUROPTO Conference about Displays Systems
    CountryGermany
    CityMünchen
    Period23/06/9324/06/93

    Fingerprint Dive into the research topics of 'Size limits of non-split and split ACTFEL-displays'. Together they form a unique fingerprint.

  • Cite this

    Åberg, M. (1993). Size limits of non-split and split ACTFEL-displays. In C. T. Bartlett, & M. D. Cowan (Eds.), Display Systems (pp. 34-43). International Society for Optics and Photonics SPIE. Proceedings of SPIE, Vol.. 1988 https://doi.org/10.1117/12.164723