Stability of a Rh/CeO2–ZrO2 Catalyst in the Oxidative Steam Reforming of Raw Bio-oil

A. Remiro (Corresponding Author), A. Arandia, L. Oar-Arteta, J. Bilbao, A.G. Gayubo

Research output: Contribution to journalArticleScientificpeer-review

22 Citations (Scopus)

Abstract

The oxidative steam reforming (OSR) of raw bio-oil (obtained by fast pyrolysis of pine sawdust) has been studied on a Rh/CeO 2-ZrO 2 catalyst under a wide range of operating conditions (600-750 °C; steam-to-carbon molar ratio, 3-9; oxygen-to-carbon molar ratio, 0.34; space time, 0.15-0.6 g catalyst h/g bio-oil) in order to delimit the suitable conditions for high and stable H 2 production. The runs were conducted in a two-step system provided with a thermal step (at 500 °C) for bio-oil vaporization and pyrolytic lignin retention, followed by an online catalytic reforming step in a fluidized bed reactor. The spent catalyst was characterized by temperature-programmed oxidation, temperature-programmed reduction, and transmission electron microscopy in order to ascertain the causes of deactivation and the effect of the reaction conditions on these causes. The evolution with time on stream of both bio-oil oxygenates conversion and yields of reaction products shows different periods and catalyst states, with two sharp changes associated with different catalyst deactivation causes: (i) change in the states of Rh species and aging of the support (with fast dynamics) and (ii) coke deposition (at low temperature) or Rh sintering (at high temperature, with slow dynamics).

Original languageEnglish
Pages (from-to)3588–3598
JournalEnergy and Fuels
Volume32
Issue number3
DOIs
Publication statusPublished - 2018
MoE publication typeA1 Journal article-refereed

Fingerprint

Dive into the research topics of 'Stability of a Rh/CeO2–ZrO2 Catalyst in the Oxidative Steam Reforming of Raw Bio-oil'. Together they form a unique fingerprint.

Cite this