Time-averaged simulation of the furnace of a commercial CFB boiler

Juho Peltola, Sirpa Kallio, H. Yang, X Qiu, J. Li

Research output: Chapter in Book/Report/Conference proceedingConference article in proceedingsScientificpeer-review

Abstract

A time-averaged simulation approach is applied to a 135 MWe circulating fluidized bed combustor located in Ruzhou, China, in which also measurements were carried out. The simulation results show a vertical solids distribution typical for a CFB. Gas composition profiles show plausible but not fully correct distributions of oxygen and combustion products inside the furnace.
Original languageEnglish
Title of host publicationProceedings The 14th International Conference on Fluidization
Subtitle of host publicationFrom Fundamentals to Products
EditorsJ.A.M. Kuipers, R.F. Mudde, J.R. van Ommen, N.G. Deen
Pages699-706
Publication statusPublished - 2013
MoE publication typeNot Eligible
Event14th International conference on fluidization, Fluidization XIV: From fundamentals to products - Noordwijkerhout, Netherlands
Duration: 26 May 201331 May 2013
Conference number: 14
http://dc.engconfintl.org/fluidization_xiv/ (May 26-31, 2013 - NH Conference Centre Leeuwenhorst Noordwijkerhout, The Netherlands)

Conference

Conference14th International conference on fluidization, Fluidization XIV
Abbreviated titleFluidization XIV
CountryNetherlands
CityNoordwijkerhout
Period26/05/1331/05/13
Internet address

Keywords

  • bubbling fluidized bed
  • simulation
  • CFD
  • time-averaged

Fingerprint Dive into the research topics of 'Time-averaged simulation of the furnace of a commercial CFB boiler'. Together they form a unique fingerprint.

Cite this