Transducer Response Under Non-Standardised Torque Load Profiles

R. S. Oliveira; P. Weidinger; Z. Song; L. Vavrečka; J. Fidelus; Timo Kananen; Sauli Kilponen

doi:10.21014/tc3-2022.116

Transducer Response Under Non-Standardised Torque Load Profiles

R. S. Oliveira
, P. Weidinger
, Z. Song
, L. Vavrečka
, J. Fidelus
, Timo Kananen
, Sauli Kilponen

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific

Abstract

In nacelle system test benches, different wind profiles are simulated by applying different torque loads and rotational speeds amongst other things. Unlike load sequences during calibration measurements, these profiles are neither constant nor increasing and decreasing through controlled steps. This article proposes a sequence of partial range and shuffled torque load tests that combine torque rates and filter settings to evaluate parameters affecting the measurement results, such as output sensitivity, linearity, and hysteresis.

Original language	English
Title of host publication	24th IMEKO TC3 Conference on Measurement of Force, Mass and Torque
Subtitle of host publication	Held with TC5, TC16 and TC22
Pages	242-247
Number of pages	6
DOIs	https://doi.org/10.21014/tc3-2022.116
Publication status	Published - 2022
MoE publication type	B3 Non-refereed article in conference proceedings
Event	24th IMEKO TC3 Conference on Measurement of Force, Mass and Torque - Cavtat-Dubrovnik, Croatia Duration: 11 Oct 2022 → 13 Oct 2022

Conference

Conference	24th IMEKO TC3 Conference on Measurement of Force, Mass and Torque
Country/Territory	Croatia
City	Cavtat-Dubrovnik
Period	11/10/22 → 13/10/22

Funding

The project 19ENG08 – WindEFCY has received funding form the EMPIR programme co-financed by the Participating States for the European Union’s Horizon 2020 research and innovation programme. The input of all project partners is gratefully acknowledged.

Keywords

torque calibration
DIN 51309
DKD-R 3-9
transient torque load
randomly shuffled loading

Access to Document

10.21014/tc3-2022.116

WindEFCY: Traceable mechanical and electrical power measurement for efficiency determination of wind turbines
Kananen, T. (Manager), Hällström, J. (Participant) & Kilponen, S. (Participant)
EURAMET e.V.
1/09/20 → 31/08/23
Project: EU project

Cite this

@inproceedings{c2b9cce7957c4c20a95a3d07dd35ba1a,

title = "Transducer Response Under Non-Standardised Torque Load Profiles",

abstract = "In nacelle system test benches, different wind profiles are simulated by applying different torque loads and rotational speeds amongst other things. Unlike load sequences during calibration measurements, these profiles are neither constant nor increasing and decreasing through controlled steps. This article proposes a sequence of partial range and shuffled torque load tests that combine torque rates and filter settings to evaluate parameters affecting the measurement results, such as output sensitivity, linearity, and hysteresis.",

keywords = "torque calibration, DIN 51309, DKD-R 3-9, transient torque load, randomly shuffled loading",

author = "Oliveira, \{R. S.\} and P. Weidinger and Z. Song and L. Vavre{\v c}ka and J. Fidelus and Timo Kananen and Sauli Kilponen",

year = "2022",

doi = "10.21014/tc3-2022.116",

language = "English",

isbn = "978-1-7138-7020-3",

pages = "242--247",

booktitle = "24th IMEKO TC3 Conference on Measurement of Force, Mass and Torque",

note = "24th IMEKO TC3 Conference on Measurement of Force, Mass and Torque ; Conference date: 11-10-2022 Through 13-10-2022",

}

Oliveira, RS, Weidinger, P, Song, Z, Vavrečka, L, Fidelus, J, Kananen, T & Kilponen, S 2022, Transducer Response Under Non-Standardised Torque Load Profiles. in 24th IMEKO TC3 Conference on Measurement of Force, Mass and Torque: Held with TC5, TC16 and TC22. pp. 242-247, 24th IMEKO TC3 Conference on Measurement of Force, Mass and Torque, Cavtat-Dubrovnik, Croatia, 11/10/22. https://doi.org/10.21014/tc3-2022.116

TY - GEN

T1 - Transducer Response Under Non-Standardised Torque Load Profiles

AU - Oliveira, R. S.

AU - Weidinger, P.

AU - Song, Z.

AU - Vavrečka, L.

AU - Fidelus, J.

AU - Kananen, Timo

AU - Kilponen, Sauli

PY - 2022

Y1 - 2022

N2 - In nacelle system test benches, different wind profiles are simulated by applying different torque loads and rotational speeds amongst other things. Unlike load sequences during calibration measurements, these profiles are neither constant nor increasing and decreasing through controlled steps. This article proposes a sequence of partial range and shuffled torque load tests that combine torque rates and filter settings to evaluate parameters affecting the measurement results, such as output sensitivity, linearity, and hysteresis.

AB - In nacelle system test benches, different wind profiles are simulated by applying different torque loads and rotational speeds amongst other things. Unlike load sequences during calibration measurements, these profiles are neither constant nor increasing and decreasing through controlled steps. This article proposes a sequence of partial range and shuffled torque load tests that combine torque rates and filter settings to evaluate parameters affecting the measurement results, such as output sensitivity, linearity, and hysteresis.

KW - torque calibration

KW - DIN 51309

KW - DKD-R 3-9

KW - transient torque load

KW - randomly shuffled loading

U2 - 10.21014/tc3-2022.116

DO - 10.21014/tc3-2022.116

M3 - Conference article in proceedings

SN - 978-1-7138-7020-3

SP - 242

EP - 247

BT - 24th IMEKO TC3 Conference on Measurement of Force, Mass and Torque

T2 - 24th IMEKO TC3 Conference on Measurement of Force, Mass and Torque

Y2 - 11 October 2022 through 13 October 2022

ER -

Transducer Response Under Non-Standardised Torque Load Profiles

Abstract

Conference

Funding

Keywords

Access to Document

Fingerprint

Projects

WindEFCY: Traceable mechanical and electrical power measurement for efficiency determination of wind turbines

Cite this