Verification of the thermal design of electronic equipment

Risto Hienonen, Matti Karjalainen, Raija Lankinen

Research output: Book/ReportReportProfessional

2 Citations (Scopus)

Abstract

This report "Verification of the thermal design of electronic equipment" is intended as a helping tool in the design of electronics and its quality control. It describes how the thermal design of electronic equipment is closely linked to other areas of design work, and how the quality of the goals set for it and their fulfilment are verified. The verification method covers all packaging levels of electronic equipment from the system level down to the electronic component level. The method described in this report can be used as part of the quality control system of a corporation. Information is included on the measurement and test methods needed in the verification process. Several measurement methods for the temperature, flow and pressure of air are described. This project is part of the "Cool Electronics" research programme funded by TEKES, the Finnish Technology Development Centre. It was carried out by VTT Automation in cooperation with Lappeenranta University of Technology, Nokia Research Center and ABB Industry Oy VSD-Technology. The report is available both in English (VTT Publications 320) and in Finnish (VTT Julkaisuja 824).
Original languageEnglish
Place of PublicationEspoo
PublisherVTT Technical Research Centre of Finland
Number of pages99
ISBN (Print)951-38-5072-2
Publication statusPublished - 1997
MoE publication typeNot Eligible

Publication series

NameVTT Publications
PublisherVTT
No.320
ISSN (Print)1235-0621
ISSN (Electronic)1455-0849

Fingerprint

Electronic equipment
Quality control
Industry
Packaging
Automation
Hot Temperature
Control systems
Air
Temperature

Keywords

  • thermal design
  • verification
  • thermal audite
  • electric equipment
  • electronics
  • cool
  • quality
  • quality control
  • thermal model
  • temperature measurement
  • tests
  • environmental tests
  • Finland

Cite this

Hienonen, R., Karjalainen, M., & Lankinen, R. (1997). Verification of the thermal design of electronic equipment. Espoo: VTT Technical Research Centre of Finland. VTT Publications, No. 320
Hienonen, Risto ; Karjalainen, Matti ; Lankinen, Raija. / Verification of the thermal design of electronic equipment. Espoo : VTT Technical Research Centre of Finland, 1997. 99 p. (VTT Publications; No. 320).
@book{95da5e53f7804e1baaeee4389afbea86,
title = "Verification of the thermal design of electronic equipment",
abstract = "This report {"}Verification of the thermal design of electronic equipment{"} is intended as a helping tool in the design of electronics and its quality control. It describes how the thermal design of electronic equipment is closely linked to other areas of design work, and how the quality of the goals set for it and their fulfilment are verified. The verification method covers all packaging levels of electronic equipment from the system level down to the electronic component level. The method described in this report can be used as part of the quality control system of a corporation. Information is included on the measurement and test methods needed in the verification process. Several measurement methods for the temperature, flow and pressure of air are described. This project is part of the {"}Cool Electronics{"} research programme funded by TEKES, the Finnish Technology Development Centre. It was carried out by VTT Automation in cooperation with Lappeenranta University of Technology, Nokia Research Center and ABB Industry Oy VSD-Technology. The report is available both in English (VTT Publications 320) and in Finnish (VTT Julkaisuja 824).",
keywords = "thermal design, verification, thermal audite, electric equipment, electronics, cool, quality, quality control, thermal model, temperature measurement, tests, environmental tests, Finland",
author = "Risto Hienonen and Matti Karjalainen and Raija Lankinen",
note = "Project code: A6SU00632",
year = "1997",
language = "English",
isbn = "951-38-5072-2",
series = "VTT Publications",
publisher = "VTT Technical Research Centre of Finland",
number = "320",
address = "Finland",

}

Hienonen, R, Karjalainen, M & Lankinen, R 1997, Verification of the thermal design of electronic equipment. VTT Publications, no. 320, VTT Technical Research Centre of Finland, Espoo.

Verification of the thermal design of electronic equipment. / Hienonen, Risto; Karjalainen, Matti; Lankinen, Raija.

Espoo : VTT Technical Research Centre of Finland, 1997. 99 p. (VTT Publications; No. 320).

Research output: Book/ReportReportProfessional

TY - BOOK

T1 - Verification of the thermal design of electronic equipment

AU - Hienonen, Risto

AU - Karjalainen, Matti

AU - Lankinen, Raija

N1 - Project code: A6SU00632

PY - 1997

Y1 - 1997

N2 - This report "Verification of the thermal design of electronic equipment" is intended as a helping tool in the design of electronics and its quality control. It describes how the thermal design of electronic equipment is closely linked to other areas of design work, and how the quality of the goals set for it and their fulfilment are verified. The verification method covers all packaging levels of electronic equipment from the system level down to the electronic component level. The method described in this report can be used as part of the quality control system of a corporation. Information is included on the measurement and test methods needed in the verification process. Several measurement methods for the temperature, flow and pressure of air are described. This project is part of the "Cool Electronics" research programme funded by TEKES, the Finnish Technology Development Centre. It was carried out by VTT Automation in cooperation with Lappeenranta University of Technology, Nokia Research Center and ABB Industry Oy VSD-Technology. The report is available both in English (VTT Publications 320) and in Finnish (VTT Julkaisuja 824).

AB - This report "Verification of the thermal design of electronic equipment" is intended as a helping tool in the design of electronics and its quality control. It describes how the thermal design of electronic equipment is closely linked to other areas of design work, and how the quality of the goals set for it and their fulfilment are verified. The verification method covers all packaging levels of electronic equipment from the system level down to the electronic component level. The method described in this report can be used as part of the quality control system of a corporation. Information is included on the measurement and test methods needed in the verification process. Several measurement methods for the temperature, flow and pressure of air are described. This project is part of the "Cool Electronics" research programme funded by TEKES, the Finnish Technology Development Centre. It was carried out by VTT Automation in cooperation with Lappeenranta University of Technology, Nokia Research Center and ABB Industry Oy VSD-Technology. The report is available both in English (VTT Publications 320) and in Finnish (VTT Julkaisuja 824).

KW - thermal design

KW - verification

KW - thermal audite

KW - electric equipment

KW - electronics

KW - cool

KW - quality

KW - quality control

KW - thermal model

KW - temperature measurement

KW - tests

KW - environmental tests

KW - Finland

M3 - Report

SN - 951-38-5072-2

T3 - VTT Publications

BT - Verification of the thermal design of electronic equipment

PB - VTT Technical Research Centre of Finland

CY - Espoo

ER -

Hienonen R, Karjalainen M, Lankinen R. Verification of the thermal design of electronic equipment. Espoo: VTT Technical Research Centre of Finland, 1997. 99 p. (VTT Publications; No. 320).