Abstract
Original language | English |
---|---|
Title of host publication | Multiscale modelling and design for engineering application |
Editors | Tarja Laitinen, Kim Wallin |
Place of Publication | Espoo |
Publisher | VTT Technical Research Centre of Finland |
Pages | 97-105 |
ISBN (Electronic) | 978-951-38-7914-3 |
ISBN (Print) | 978-951-38-7913-6 |
Publication status | Published - 2013 |
MoE publication type | D2 Article in professional manuals or guides or professional information systems or text book material |
Publication series
Series | VTT Technology |
---|---|
Number | 77 |
ISSN | 2242-1211 |
Fingerprint
Cite this
}
Vertical multiscale modelling. / Revuelta, Alejandro.
Multiscale modelling and design for engineering application. ed. / Tarja Laitinen; Kim Wallin. Espoo : VTT Technical Research Centre of Finland, 2013. p. 97-105 (VTT Technology; No. 77).Research output: Chapter in Book/Report/Conference proceeding › Chapter or book article › Professional
TY - CHAP
T1 - Vertical multiscale modelling
AU - Revuelta, Alejandro
PY - 2013
Y1 - 2013
N2 - This paper stresses the need to go towards modelling and simulation solutions which combine together the different CAE tools available to practicioners. By doing this it is expected that results can be obtained which go beyond of what can be achieved with the current methodologies. And in this way we could reduce cost and increase performance through improved design. The different types of integration of tools are presented. In order to achieve this vision, a review of different knowledge areas which require further research is discussed. Finally, some of the current approaches done at VTT for the integration of different CAE tools are explained and briefly introduced.
AB - This paper stresses the need to go towards modelling and simulation solutions which combine together the different CAE tools available to practicioners. By doing this it is expected that results can be obtained which go beyond of what can be achieved with the current methodologies. And in this way we could reduce cost and increase performance through improved design. The different types of integration of tools are presented. In order to achieve this vision, a review of different knowledge areas which require further research is discussed. Finally, some of the current approaches done at VTT for the integration of different CAE tools are explained and briefly introduced.
M3 - Chapter or book article
SN - 978-951-38-7913-6
T3 - VTT Technology
SP - 97
EP - 105
BT - Multiscale modelling and design for engineering application
A2 - Laitinen, Tarja
A2 - Wallin, Kim
PB - VTT Technical Research Centre of Finland
CY - Espoo
ER -