Wet strength properties of foam formed fiber materials

Tiinamari Seppänen; Jukka Ketoja; Tiina Pöhler; Elina Pääkkönen

Wet strength properties of foam formed fiber materials

Tiinamari Seppänen^*
, Jukka Ketoja
, Tiina Pöhler
, Elina Pääkkönen

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

Abstract

The foam forming of natural fibers into different materials represent an increasinglyapplied method due to its cost-effectiveness. Various potential application areas offoam formed cellulose fiber materials, including tissue paper, packaging materials aswell as some construction materials,r equire wet strength. Required wet strengthproperties depends highly on the application type, for example toilet paper requirestemporary wet strength and insulation material should not be affected by the fluctuatinghumidity. In this novel work polyamidoamide-epichlorohydrin (PAE) as well as potentialbio-based and/or biodegradable wet strength agents are used to increase the wetstrength of cellulose-based foam formed materials. The efficiency of different wetstrength agents was examined by measuring wet tensile index from paper-likematerials and durance against disintegration in water from low-density materials.

Original language	English
Title of host publication	Progress in Paper Physics Seminar
Subtitle of host publication	Abstract book of the PPPS2020 seminar
Editors	Jarmo Kouko, Jani Lehto, Tero Tuovinen
Publisher	VTT Technical Research Centre of Finland
Pages	281-283
ISBN (Electronic)	978-951-38-8736-0
ISBN (Print)	978-951-38-8738-4
Publication status	Published - 1 Sept 2020
MoE publication type	A4 Article in a conference publication
Event	Progress in Paper Physics Seminar, PPPS 2020 - Jyväskylä, Finland Duration: 1 Sept 2020 → 3 Sept 2020

Publication series

Series	VTT Technology
Number	378
ISSN	2242-1211

Seminar

Seminar	Progress in Paper Physics Seminar, PPPS 2020
Abbreviated title	PPPS2020
Country/Territory	Finland
City	Jyväskylä
Period	1/09/20 → 3/09/20

Keywords

foam forming
wet strength

Access to Document

https://publications.vtt.fi/pdf/technology/2020/T378.pdf

Cite this

@inproceedings{aefa17f5f23f4a209285a04b21d1a999,

title = "Wet strength properties of foam formed fiber materials",

abstract = "The foam forming of natural fibers into different materials represent an increasinglyapplied method due to its cost-effectiveness. Various potential application areas offoam formed cellulose fiber materials, including tissue paper, packaging materials aswell as some construction materials,r equire wet strength. Required wet strengthproperties depends highly on the application type, for example toilet paper requirestemporary wet strength and insulation material should not be affected by the fluctuatinghumidity. In this novel work polyamidoamide-epichlorohydrin (PAE) as well as potentialbio-based and/or biodegradable wet strength agents are used to increase the wetstrength of cellulose-based foam formed materials. The efficiency of different wetstrength agents was examined by measuring wet tensile index from paper-likematerials and durance against disintegration in water from low-density materials. ",

keywords = "foam forming, wet strength",

author = "Tiinamari Sepp{\"a}nen and Jukka Ketoja and Tiina P{\"o}hler and Elina P{\"a}{\"a}kk{\"o}nen",

year = "2020",

month = sep,

day = "1",

language = "English",

isbn = "978-951-38-8738-4",

series = "VTT Technology",

publisher = "VTT Technical Research Centre of Finland",

number = "378",

pages = "281--283",

editor = "Kouko, \{Jarmo \} and Jani Lehto and Tero Tuovinen",

booktitle = "Progress in Paper Physics Seminar",

address = "Finland",

note = "Progress in Paper Physics Seminar, PPPS 2020, PPPS2020 ; Conference date: 01-09-2020 Through 03-09-2020",

}

Seppänen, T , Ketoja, J, Pöhler, T & Pääkkönen, E 2020, Wet strength properties of foam formed fiber materials. in J Kouko, J Lehto & T Tuovinen (eds), Progress in Paper Physics Seminar: Abstract book of the PPPS2020 seminar. VTT Technical Research Centre of Finland, VTT Technology, no. 378, pp. 281-283, Progress in Paper Physics Seminar, PPPS 2020, Jyväskylä, Finland, 1/09/20. <https://publications.vtt.fi/pdf/technology/2020/T378.pdf>

Wet strength properties of foam formed fiber materials. / Seppänen, Tiinamari ; Ketoja, Jukka; Pöhler, Tiina et al.
Progress in Paper Physics Seminar: Abstract book of the PPPS2020 seminar. ed. / Jarmo Kouko; Jani Lehto; Tero Tuovinen. VTT Technical Research Centre of Finland, 2020. p. 281-283 (VTT Technology; No. 378).

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Wet strength properties of foam formed fiber materials

AU - Seppänen, Tiinamari

AU - Ketoja, Jukka

AU - Pöhler, Tiina

AU - Pääkkönen, Elina

PY - 2020/9/1

Y1 - 2020/9/1

N2 - The foam forming of natural fibers into different materials represent an increasinglyapplied method due to its cost-effectiveness. Various potential application areas offoam formed cellulose fiber materials, including tissue paper, packaging materials aswell as some construction materials,r equire wet strength. Required wet strengthproperties depends highly on the application type, for example toilet paper requirestemporary wet strength and insulation material should not be affected by the fluctuatinghumidity. In this novel work polyamidoamide-epichlorohydrin (PAE) as well as potentialbio-based and/or biodegradable wet strength agents are used to increase the wetstrength of cellulose-based foam formed materials. The efficiency of different wetstrength agents was examined by measuring wet tensile index from paper-likematerials and durance against disintegration in water from low-density materials.

AB - The foam forming of natural fibers into different materials represent an increasinglyapplied method due to its cost-effectiveness. Various potential application areas offoam formed cellulose fiber materials, including tissue paper, packaging materials aswell as some construction materials,r equire wet strength. Required wet strengthproperties depends highly on the application type, for example toilet paper requirestemporary wet strength and insulation material should not be affected by the fluctuatinghumidity. In this novel work polyamidoamide-epichlorohydrin (PAE) as well as potentialbio-based and/or biodegradable wet strength agents are used to increase the wetstrength of cellulose-based foam formed materials. The efficiency of different wetstrength agents was examined by measuring wet tensile index from paper-likematerials and durance against disintegration in water from low-density materials.

KW - foam forming

KW - wet strength

UR - https://doi.org/10.32040/2242-122X.2020.T378

M3 - Conference article in proceedings

SN - 978-951-38-8738-4

T3 - VTT Technology

SP - 281

EP - 283

BT - Progress in Paper Physics Seminar

A2 - Kouko, Jarmo

A2 - Lehto, Jani

A2 - Tuovinen, Tero

PB - VTT Technical Research Centre of Finland

T2 - Progress in Paper Physics Seminar, PPPS 2020

Y2 - 1 September 2020 through 3 September 2020

ER -

Wet strength properties of foam formed fiber materials

Abstract

Publication series

Seminar

Keywords

Access to Document

Other files and links

Fingerprint

Progress in Paper Physics Seminar: Abstract book of the PPPS2020 seminar September 1-3, 2020 in Jyväskylä, Finland

Cite this